PRODUCT DATASHEET Stella series last update 7/7/2017 DETAILS Product Number FN15264_STELLA-HB-WWW Family Stella Type Pack Color black Diameter 90 mm Height 11,3 mm Style round Optic Material Silicone Holder Material Fastening screw Status production ready ROHS Compliant Yes Date Updated 7/07/2017 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency cd/lm Connector VERO29 103 deg WWW-class 91 % 0.350 - Vero SE 29 105 deg WWW-class 92 % 0.340 - Vero SE 13 101 deg WWW-class 90 % 0.370 - Vero SE 18 101 deg WWW-class 90 % 0.370 - VERO18 102 deg WWW-class 89 % 0.360 - V10 Gen7 sim: 95 WWW-class sim: 88 % sim: 0.430 Bender Wirth: 434 Typ Z1 V22 Gen7 sim: 96 WWW-class sim: 94 % sim: 0.457 IDEAL: 50-2204CT V22 Gen7 sim: 94 WWW-class sim: 94 % sim: 0.457 Bender Wirth: 431 Typ Z1 V18 Gen7 sim: 98 WWW-class sim: 87 % sim: 0.390 BJB: 47.319.2350 V13 Gen7 sim: 94 WWW-class sim: 94 % sim: 0.440 Bender Wirth: 477 Typ Z1 V13 Gen7 sim: 94 WWW-class sim: 94 % sim: 0.448 - V22 Gen7 102 deg WWW-class 89 % 0.350 Bender Wirth: 431 Typ Z1 CLL02x/CLU02x (LES10) 100 deg WWW-class 88 % 0.370 - CLL04x/CLU04x 102 deg WWW-class 89 % 0.360 - CLL05x/CLU05x sim: 97 WWW-class sim: 87 % sim: 0.380 - CXA/B 3590 102 deg WWW-class 90 % 0.360 - CXA/B 1816 & CXA/B 1820 & CXA 1850 102 deg WWW-class 87 % 0.350 - CXA/B 25xx sim: 98 WWW-class sim: 89 % sim: 0.400 - LUXEON CoB 1216/1812 sim: 99 WWW-class sim: 87 % sim: 0.360 - LUXEON CoB 1321 102 deg WWW-class 89 % 0.340 - LUXEON CoB 1825 100 deg WWW-class 88 % 0.400 - COB H-Type 101 deg WWW-class 89 % 0.360 - COB J-Type 102 deg WWW-class 88 % 0.360 - Fortimo SLM 1211 L19 G6 Poke-In 101 deg WWW-class 93 % 0.380 - MJT COB LES 33 101 deg WWW-class 90 % 0.360 Bender Wirth: 458 Typ L4 January 22nd 2018 7:49 Copyright Ledil Oy - Subject to change without prior notice - Page 1/2 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 PRODUCT DATASHEET Stella series last update 7/7/2017 OPTICAL PROPERTIES Viewing Light Effi- LED Angle Beam ciency MJT COB LES 22 101 deg MJT COB LES 22 101 deg MJT COB LES 14.5 MJT COB LES 14.5 cd/lm Connector WWW-class 89 % 0.360 IDEAL: 50-2204CT WWW-class 89 % 0.360 Bender Wirth: 431 Typ Z1 101 deg WWW-class 90 % 0.450 Bender Wirth: 433 Typ Z1 101 deg WWW-class 87 % 0.400 - January 22nd 2018 7:49 Copyright Ledil Oy - Subject to change without prior notice - Page 2/2 Ledil Oy Salorankatu 10 24240 SALO, Finland http://www.ledil.com email: [email protected] FAX: +358-2-733 8001 A B C D E F G H 90 11.8 4 4 1 3 3 2 2 2 NOTE: Maximum recommended tightening torque for STELLA-FRAME is 0,4Nm INDEX PART NO 1 2 DESCRIPTION MATERIAL COLOUR STELLA-FRAME STELLA-HB-WWW PA Silicone black Clear F13322 F15263 Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: Up to 30mm class M, otherwise class C. According to DIN ISO 2768-2 Form and position: class L THIRD ANGLE PROJECTION: 1 This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE FN15264_STELLA-HB-WWW SIZE A3 SCALE H G 1 PART NUMBER FN15264 1:1 WEIGHT 29,44 g B SHEET A 1/1 NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. GENERAL INFORMATION - Product series especially designed & optimized for series of LEDs. - Special care taken to make light distribution as uniform as possible. Note! Due to use of high power COB's with this product, special attention to proper thermal design is highly recommended. LEDiL has no liability for direct, indirect or consecutive damages arising from the LEDiL products being used outside of the recommended temperature range.