AMR4 SERIES AC - DC DIN RAIL MOUNTABLE POWER SUPPLY INDUSTRIAL CONTROL EQUIPMENT FEATURES ‧UNIVERSAL INPUT 90~264VAC ‧SHORT CIRCUIT PROTECTION ‧INTERNAL INPUT FILTER ‧LOW PROFILE FOR BUILDING AUTOMATION R R R H H H Class I, Div 2 MODEL LIST a UL 60950-1 UL 1310 IND. CONT. EQ. UL 508 EN 60950-1 OUTPUT CURRENT EFF. (min.) EFF. (typ.) + 5 VDC 7000 mA 78% 80% 54 WATTS + 12 VDC 4500 mA 82% 84% 60 WATTS + 15 VDC 4000 mA 83% 85% 60 WATTS + 24 VDC 2500 mA 84% 86% MODEL NO. INPUT VOLTAGE AMR4-05 90~264 VAC 35 WATTS AMR4-12 90~264 VAC AMR4-15 90~264 VAC AMR4-24 90~264 VAC OUTPUT OUTPUT WATTAGE VOLTAGE Single Output Models SPECIFICATION o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed GENERAL Characteristics Vi nom, Io nom Input-Output Isolation resistance Ambient temperature Input-Output, @ 500VDC Operating at Vi nom Derating (see derating curve) Storage temperature Relative humidity o 55 100 2.5 Vi nom, Io nom Vi nom, Io min unit KHz VAC / VDC MΩ + 71 -40 Vi nom, from +56 C to +71 C Non operational Bellcore Issue 6 @40 oC, GB Installation position Pollution degree max. o MTBF Dimension Cooling typ. 45 3000/4242 Temperature coefficient Altitude during operation min. Conditions Switching frequency Isolation voltage -40 + 85 20 95 ± 0.03 o C % / oC o C % RH % / oC 5V model 595000 Hours 12V model 15V model 582000 Hours 582000 Hours 24V model 608000 IEC 60068-2-13 4850 Hours m mm L91 x W71x D56.5 Free air convection Vertical ( other direction may derating using ) 2 INPUT SPECIFICATIONS Characteristics min. Conditions Rated input voltage Absolute input max. range Io nom Ta min ... Ta max, Io nom Input current Vi : 115 / 230 VAC, Io nom 5V model 12V, 15V, 24V models Vi : 90 VAC, Io nom 5V model 12V, 15V, 24V models Rated input current Line frequency Vi nom, Io nom Inrush current Power dissipation Vi : 115 / 230 VAC , Io nom www.chinfa.com 2011.01.28 Vi : 230 VAC, Io nom AC in 100 90 DC in 120 typ. max. VAC VAC 375 VDC 0.7 / 0.43 A 1.1 / 0.6 A 1.0 47 5V model 8.8 12V model 10.2 unit 240 264 A 1.5 A 63 30 / 60 Hz A W W [email protected] P1 AMR4 SERIES SPECIFICATION o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed INPUT SPECIFICATIONS Characteristics Power dissipation Leakage current min. Conditions Vi : 230 VAC, Io nom typ. 15V model 10 24V model 9.9 max. unit W W Input-Output 0.25 mA OUTPUT SPECIFICATIONS Characteristics Conditions min. Output voltage accuracy (Adjusted before shipment) Vi nom, Io max 0 Minimum load Line regulation Vi nom Io nom, Vi min ...Vi max 0 Load regulation Vi nom, Io min ...Io nom Vi nom, 0.8 Io nom Voltage trim range Rated continuous loading Vi nom, Turn on time Rise time Vi nom, Io nom Vi nom, Io nom Vi nom, Io nom Vi nom, Io nom 14 16.5 24V model 5V model 24 DC ON indicator threshold at start up (Green LED) Vi nom, Io nom ms 1000 ms 1500 ms 150 ms 500 ms 150 ms 2 50 ms Vi nom, Io nom mV 7.5 VDC 12V model 15V model 18 VDC 22 35 VDC 3500 VDC μF 5V model 3.5 4.5 VDC 12V model 15V model 9 10.8 VDC 11 13.5 VDC 24V model 5V model 19.2 21.6 VDC 3.5 4.5 VDC 12V model 15V model 9 10.8 VDC 11 13.5 VDC 24V model Efficiency ms 5V model 24V model Vi nom, Io nom VDC 2.5A @ 24VDC / 2.1A @ 28VDC Vi nom, 1~0.5 Io nom Capacitor load VDC 4A @ 15VDC / 3.6A @ 16.5VDC with 3500μF CAP Vi nom, Io nom VDC 28 7A @ 5VDC / 6.3A @ 5.5VDC with 3500μF CAP Power back immunity % 4.5A @ 12VDC / 3.8A @ 14VDC 12 / 60 Vi nom, Io nom, BW = 20MHz VDC 12 13.5 15V, 24V models Ripple & noise % 12V model 15V model 16 / 60 Vi nom, Io nom DC LOW indicator threshold after start up (Red LED) % ±1 5 5V, 12V models Fall time Transient recovery time % +1 5V model 24V model Vi : 115 / 230 VAC, Io nom unit max. ±1 5.5 12V model 15V model Hold up time typ. Vi nom, Io nom, Po / Pi VDC 19.2 21.6 Up to 86%, See model list and typ efficiency curve CONTROL AND PROTECTION Characteristics min. Conditions Input fuse Internal surge voltage protection Rated over load protection Over voltage protection typ. max. IEC 61000-4-5 Vi nom (see typ current limited curve) Vi nom, Io nom (Auto Recovery) Varistor 110 150 % 5V model 5.75 6.5 VDC 12V model 15V model 15 16.5 VDC 18 20 VDC 24V model 30 33 VDC Output short circuit Fold forward Degree of protection IP20 www.chinfa.com 2011.01.28 unit T2A / 250VAC internal [email protected] P2 AMR4 SERIES SPECIFICATION All Specifications Typical At Nominal Line, Full Load, 25oC Unless Otherwise Noticed APPROVALS AND STANDARDS UL / cUL UL 508 Listed UL 60950-1, UL 1310 Class 2 Power (only 5V w/o Class 2) Recognized ISA 12.12.01(Class I, Division 2, Groups A, B, C and D) TUV EN 60950-1, CB scheme CE EN 61000-6-3, EN 55022 Class B, EN 61000-3-2, EN 61000-3-3 EN 61000-6-2, EN 55024, EN 61000-4-2 Level 4, EN 61000-4-3 Level 3 EN 61000-4-4 Level 4, EN 61000-4-5 L-N Level 3 EN 61000-4-6 Level 3, EN 61000-4-8 Level 4, EN 61000-4-11 ENV 50204 Level 2, EN 61204-3 Vibration resistance meet IEC 60068-2-6 (Mounting by rail : 10-500 Hz, 2G, along X, Y, Z each Axis, 60 min for each Axis ) Shock resistance meet IEC 60068-2-27 (15G, 11ms, 3 Axis, 6 Faces, 3 times for each Face) PHYSICAL CHARACTERISTICS Case size 91 x 71 x 56.5 mm (3.58 x 2.8 x 2.22 inches) Case material Plastic Weight 250g Packing 0.31kg ; 48 / 16kg / 2.28CUFT MECHANISM & PIN CONFIGURATION mm [inch] CONSTRUCTION Easy snap-on mounting onto the DIN-Rail (TS35/7.5 or TS35/15), unit sits safely and firmly on the rail; no tools required even to remove 71.00 [2.80] INSTALLATION 12. 00 [0. 47] 45. 00 [1. 77] N 5 6 56.50 [2.22] 51.50 [2.02] L 49.85 [1.96] Vout ADJ. DC LO DC ON 91.00 [3.58] 11. 00 [0. 43] 32.45 [1.28] 4 3 2 1 + + 91. 00 [3. 58] Ventilation / Cooling Normal convection All sides 25m/m free space For cooling recommended Connector size range AWG24-12 (0.2~2.5mm2) flexible / solid cable -Connector can withstand torque at maximum 6 pound-inches. 7m/m stripping at cable end recommends. Use copper conductors only, 60/75 oC GENERAL TOLERANCE 0.00[0.00] - 30.00[1.18] ±0.30[0.01] 30.00[1.18] - 120.00[4.72] ±0.50[0.02] PIN ASSIGNMENT Designation 1 - Negative output terminal 2 - Negative output terminal + Positive output terminal 4 + Positive output terminal 5 L Input terminals (phase conductor, no polarity at DC input) N Input terminals (neutral conductor, no polarity at DC input) Vout ADJ. Trimmer-potentiometer for Vout adjustment DC ON Operation indicator LED DC LO DC Low indicator LED OTHER 6 IN 3 OUT PIN NO. www.chinfa.com 2011.01.28 Description [email protected] P3 AMR4 SERIES CIRCUIT SCHEMATIC ‧Block diagram for AMR4 series Fuse L Line Filter N Vo + Inrush Current Switching Limiter and Device rectifier Rectifier Vo - PWM Controller Opto Isolation Reference & Error Amp. Opto Isolation Over Voltage Detection Vout ADJ. Output Level Detection DC ON (Green LED) DC LO (Red LED) TYP. CURRENT LIMITED CURVE Output Voltage [ % ] AMR4-24 100 75 230 Vac 115 Vac 50 25 0 100 110 120 130 140 150 160 Power out [ % ] DERATING CURVE TYP. EFFICIENCY CURVE AMR4-24 87 EFFICIENCY [ % ] Power out [ % ] 100 62.5 85 83 81 79 230 Vac 115 Vac 77 75 73 0 -40 www.chinfa.com 2011.01.28 56 Temperature [ oC ] 71 10 25 50 75 100 Power out [ % ] [email protected] P4