Media Converters Repeaters and Optimizers Datasheet FD Gigabit Multimode Extender Features Gigabit Ethernet transmission over FDDI-graded multimode fiber Guaranteed distance up to 2 km (up to 6 km under ideal conditions) SNMP management Hot-swap support Compatiblity with all appropriate protocol standards Fiber Driver chassis compatibility Link Integrity Notification (LIN) support Overview The unique Fiber Driver® Gigabit Multimode Extender technology allows transmission of high-speed signals over multi-mode fibers to distances much longer than the standard. This module allows the use of highspeed backbone protocols over fiber that was originally used for FDDI. Fiber optic cables for FDDI applications were typically installed in 2 km increments, the maximum distance for FDDI and Fast Ethernet on multimode fiber. Multi-mode extender modules can use these long optical fibers with Gigabit Ethernet as well. The Fiber Driver Gigabit Multimode Extender module is interoperable with all standard Gigabit Ethernet equipment. It carries Gigabit Ethernet data on existing multi-mode fiber (FDDI grade) to specified distances up to 2 km. Depending on the quality of the fiber, much longer links are possible. For additional information including pricing and availability, contact your MRV Communications sales representative and visit the MRV website. 'IGABIT %THERNET KM -ARD ND M STA 'IGABIT 3WITCH [email protected] Media Converters Repeaters and Optimizers Physical Specifications Operating Temperature Range 00C to 500C (320F to 1220F) Storage Temperature -400C to 700C (-400F to 1580F) Relative Humidity 85% maximum, non-condensing Physical Dimensions 25 mm x 75 mm x 175 mm deep (1” x 3” x 7” deep) Weight Approximately 145 g (5.1 oz) Regulatory Compliance FCC Part 15 (Class A); IC (Class A); EMC Directive: Emission (Class A) and Immunity; RoHS Directive; China RoHS; WEEE Directive Ordering Information Model Function Protocol Port / Link Connectors¹ Port/Link Min. Budget Loss (dB) Guaranteed Range² (km) EM316G/MX Gigabit Ethernet SX to Extended Multi-mode Gigabit Ethernet DSC/DSC DL³ 0-2 ¹ Default connectors are listed, other connectors are optional. ² Distances are approximate and assume 62.5µ MM fiber. ³ DL= Dispersion Limited MRV has more than 50 offices throughout the world. Addresses, phone numbers, and fax numbers are listed at www.mrv.com. Please e-mail us at [email protected] or call us for assistance. MRV (West Coast USA) 20415 Nordhoff St. Chatsworth, CA 91311 800-338-5316 818-773-0900 MRV (East Coast USA) 295 Foster St. Littleton, MA 01460 800-338-5316 978-952-4700 MRV (International) Business Park Moerfelden Waldeckerstrasse 13 64546 Moerfelden-Walldorf Germany Tel. (49) 6105/2070 Fax. (49) 6105/207-100 All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. Please contact MRV Communications for more information. MRV Communications and the MRV Communications logo are trademarks of MRV Communications, Inc. Other trademarks are the property of their respective holders. MRV-FD-GMX-041807 1398029-001 Rev. A1 Copyright ©2007 MRV Communications, Inc. All Rights Reserved.