medical HPU180A series 180W medica 180W External Medical Grade Power Supply The HPU180A series of AC/DC switching mode power supplies provide 180 Watts of continuous output power . All supplies are UL94V-1 min compliant. All models meet FCC Part-18 class B and EN55011 and are to n s M e d i c aCISPR-11 l Adapt ers class f or BHemission ealt hLimits C are Apdesigned p lica tio comply with ANSI/AAMI ES 60601-1: 2005(UL/cUL 3rd Edition), new CE requirements. All units are 100% burned in and tested. FEATURES: HPU101 series AHP183 * Wide Operating Voltage, 90 to 260 VAC, 47 to 63 Hz The HPU101 series of AC/DC switching mode power suppli * IEC-320-C14 Input Inlet with PFC provide 100 Watts of continuous output power . All suppli * Single Output min compliant. All models meet FCC Part-18 class * Over Voltage and OverUL94V-1 Load protection CISPR-11 EN55011 class B emission Limits and are designe * Medical Safety 3rd (IEC60601-1 3rd Edition) comply with ANSI/AAMI ES 60601-1: 2005(UL/cUL 3rd Edit to OutputInput : 2MOPP Wide* Input 90-260VAC 60601-1:2006 (TUV/T-mark 3rd Edition) and new CE requir RoHS2 * ON/OFF SWITCH (Optional) All units are 100% burned in and tested. 2011/65/EU * Class I system series Medical Safety IEC60601-1 3rd Edition; 2MOPP * 3 year warranty medical Class I, 3 Prong Mains Input IEC320-C14 APPLICATIONS: Patient Monitor Over** Voltage and Over Load Protection 63 Blood Pressure system * Portable medical devices series of AC/DC switching mode power supplies FEATU Optional ON/OFF Switch *The ECGHPU63B machine provide 63 Watts of continuous output power . All supplies are * Wide O UL94V-1 min compliant. All models meet FCC Part-18 class B and Power Factor Correction * IEC-32 GENERAL SPECIFICATION: CISPR-11 EN55011 class B emission Limits and are designed to * Single comply with ANSI/AAMI ES 60601-1: 2005(UL/cUL 3rd Edition), EN * Short Circuit Protection: Auto Recovery * Over V 3rd Edition) and new CE requirements. *60601-1:2006 Air Convection Cooling: Free (TUV/T-mark * Medic All units are 100% burned in and tested. APPROVALS: * Flammability Rating: UL94V-1 * Input t * Protection Classes: Class I RoHS 2 *PEnergy EN 60601-1 60601-1:2006 * Safety: ANSI/AAMI ES 60601-1:2005(UL/cUL 3rd Edition), EN 2011/65/EU * Class II (TUV/T-mark 3rd Edition) * 3 year HPU63B series APPROVALS: CB 3.52”W x 7.4”L x1.94”H PS E CB Electrical Characteristics: Symbol Model Number Condition Characteristic Output Voltage Output Amps Vins Safety Approval Input Voltage Range Input Operate Voltage Range Ouput Power Detail to see Fig.1 Min. Electrical Characteristics: 100 Efficiency Total Regulation Symbol Safety Approval & Specification in Label IEC 60601-1 S E Typ. Max. Unit 240 VAC Output Connector Characteristic APPLIC 90 260* Home VAC Safety Approval Input Voltage Range Safety Ap Vins Input Frequency 14.0 47 63 * Patien Sine wave Hz AHP1831A-05 (S) Fi 12VDC 168W max. 89% ±5% 8 Pin DIN Input Operate Voltage Range to s Vin * Blood Power Factor Correction 0.95 1Detail AHP1831A-07 (S) PF 19VDC 9.47 180W max. 91% ±5% 5 Pin DIN * Portab Input Frequency Sine wave Fi Output Power Range See Rating Chart 180 W AHP1831A-08 (S) Po 24VDC 7.50 180W max. 91% ±4% 5 Pin DIN * ECG m Power Factor Correction PF Low Line Input Current Full Load, Vin=100VAC 2.2 Iil A AHP1831A-09 (S) 30VDC 6.00 180W max. 92% ±3% Po Pin DIN Output5Power Range See Ratin GENER High Line Input Current Full Load, Vin=240VAC 0.9 Iih A AHP1831A-10 (S) 33VDC 5.455 180W max. 93% ±3% Iil 5 Pin DIN Low Line Input Current Full Load,C Low Line Input Inrush Current Full Load, 25°C, Cool start,APPROVALS: Vin=100VAC 60 * Short Irl A AHP1831A-11 (S) 48VDC 3.75 180W max. 93% ±3% Iih Coax * Coolin High Line Input Current Full Load, High Line Input Inrush Current Full Load, 25°C, Cool start, Vin=240VAC 120 Irh A EN 60601-1 P * Flamm Low Line Input Inrush Current Full Load, Irl Safety Ground Leakage Current Vin=240VAC, Fi=60Hz 0.25* Protec mA Ik Note: “(S)” Denotes that there is an ON/OFF Switch option available for the AHP183 family of products. To order an AHP183 product with the optional ON/OFF High Line Input Inrush Current Full Load, Irh * Safety FullFor Load, Vin=230VAC, Detail to see Rating Chart Efficiency See Rating Chart Switch, simply add an “S” to the end of the standard Part Number. example “AHP1831-05S”. Safety Ground Leakage Current Vin=240V Ik Line Regulation Full Load, Vin=100~120VAC or 200~240VAC % 1 (TUV/T-m △Voi Vin CB IEC 60601-1 S E Electrical Characteristics: OVP Over Voltage Protection OLP Over Load Protection ttr Time of Transient Response thu Hold-Up Time ts Start-up time Ris Insulation Resistance Tc Temperature Coefficient HV Dielectric Withstanding Voltage (P-S) Vpg Dielectric Withstanding Voltage (P-G) EMI EMC Emission Environmental: Symbol Characteristic To Operating Temperature Ts Storage Temperature Ho Operating Humidity Hs Storage Humidity Vsg ESDa Surge Voltage Electro Static Discharge MTBF Mean Time Between Failure ELEV Operating Altitude (Elevation) VBR Vibration ESDc Electro Static Discharge WWW.ASTRODYNETDI.COM Full Load, Efficiency % 112 132 Line Regulation Full Load, Recovers automatically after condition is removed % i 150 Approval Input Voltage Range Safety110 Approval & Specification VinsfaultSafety OVP Over Voltage Protection ms Full Load, Vin=110VAC Vin 4 Input Operate Voltage Range Detail to see Fig.1 (Derate linearly Recovers OLP Over Load Protection 20 ms Full Load, Vin=110VAC Fi Input Frequency Sine wave Time of Transient Response Full Load, ttr s Full Load, Vin=100~240VAC 2 Output Power Range See Rating Chart Po Hold-Up Time Full Load, thu Primary to Secondary, 500VDC,25°XC/ 70% RH 50 Vin=100VAC MΩ Low Line Input Current Full Load, Iil Start-up time Full %/°C Load, ts ±0.04 All Condition High Line Input Current Full Load, Vin=240VAC Iih Primary t Ris Insulation Resistance Primary to Secondary, limit <10mA VAC Low Line Input Inrush Current Full Load, 25°C, Cool4000 start, Vin=1 Irl current Temperature Coefficient Tc All Condit Primary to PE, limit current <10mA 1500 VAC High Line Input Inrush Current Full Load, 25°C, Cool start, Vin=2 Irh Dielectric Withstanding Voltage (P-S) Primary t HV Compliance to EN55011 (CISPR11), EN61000-3-2,-3 B Class Full Load, Vin=230VAC, Detail to Efficiency Dielectric Withstanding Voltage (P-G) Primary t Vpg Line Regulation Full Load, Vin=100~120VAC or 20 △Voi Complian EMC Emission EMI Over Voltage Protection OVP Typ. Max. Symbol Characteristic △Voi Condition Min. Unit Environmental: Recovers automatically after fau Over Load Protection Detail to see Fig.2 (DerateOLP linearly from 100% load at 40°C to 50% load at 70°C) °C -10 70 Symbol Characteristic Time of Transient Response Full Load, Vin=110VAC ttr -40 85 10 ~ 95% RH °C Operating Temperature Hold-Up Time To Full Load, Vin=100VAC Detail to s thu non-condensing 0 95% RH Storage Temperature Start-up time Ts 10 ~ 95% Full Load, Vin=100~240VAC ts See Rating Chart 0 95% RH Operating Humidity non-cond Temperature Coefficient Ho Tc All Condition kV 2 All Condition Storage Humidity See Ratin Primary to Secondary, limit curre Dielectric Withstanding Voltage (P-S) Hs HV Air Discharge, IEC61000-4-2 8 kV Compliance to EN55011All(CISPR1 Surge Voltage EMC EmissionVsg EMI ASTRODYNE USA: 1-800-823-8082 Condit Contact Discharge, IEC61000-4-2 6 kV Electro Static Discharge ASTRODYNE PACIFIC: 886-2-26983458 Air Discha ESDa Operating Temperature at 25°C, Calculated per MIL-HDBK-217F 100k h Contact D Environmental: ESDc Electro Static Discharge 3000 m All condition Operating MTBF Mean Time Between Failure Symbol 10 ~ 500Hz, 10min./1cycle, 60min. each along X, Y, Z axes Characteristic 5 G ELEV Operating Altitude (Elevation) All condit 180W M e d i c a l Adapt ers f or H ealt h C are Ap p lica tio n s with PFC 90-260 VAC (100-240 Nominal) 47-63 Hz Low Line (100VAC) 2.2A max. High Line (240VAC) 0.9A max. 0.5W Low Line (100VAC) 60A max. High Line (240VAC) 120A max. 0.25mA max. 0.95 min. Class I OUTPUT SPECIFICATIONS Voltage and Current Output Power Range Load Regulation (Note 2) Line Regulation (Note 1) Over Load Protection* Over Voltage Protection* Short Circuit Protection Transient Response Temperature Coefficient Ripple/Noise (Note 3) Start Up / Hold Up Time FL See Selection Chart 0 to FL Rating, 100W max. ± 5%, max. (0-FL, 230Vin) ± 1%, max., FL 110-150%, Auto Recovery 112-132% Auto Recovery 110Vin, FL to 1/2L 4mS ±0.04%/°C, typ 100mV p-p HL-LL / 110Vin 2S max. / 20mS min. Size Construction Weight Output Connector Flammability Rating 7.4” x 3.52” x 1.94” (188 x 89.5 x 49.3mm) Desktop Style 33.58oz (952g) See Selection Chart UL94V-1 ENVIRONMENTAL SPECIFICATIONS Oper. Temperature Cooling Storage Temperature Operating/Storage Humidity EMC MTBF (MIL-HDBK-217F) Surge Voltage ESD - Air ESD - Contact Operating Altitude (Elevation) Vibration -10 to +40°C (FL) * 50% Load @ 70°C (See Derate Curve Last Page) Free Air Convection -40 to +85°C, 10~95% RH * 0% to 95%, non-cond * Compliance to EN55011 (CISPR11), EN61000-3-2, -3 Class B 100,000 Hrs 2kV IEC61000-4-2, 8kV IEC61000-4-2, 6kV 3000m 5G, 10 ~ 500Hz, 10min./1cycle, 60min. each along X, Y, Z axes NOTES GENERAL SPECIFICATIONS Input-Out Isolation Input-GND Isolation Insulation Resistance Efficiency (FL, 230Vin) Safety series PHYSICAL SPECIFICATIONS INPUT SPECIFICATIONS Input Voltage Range Frequency Range (Sine Wave) Input Current No Load Power Consumption Inrush Current, typ (Cold Start) Leakage Current (240Vin, 60hHz) Power Factor Correction Protection Class AHP183 4000 VAC 1500 VAC 50MΩ, 500VDC,25°XC/ 70% RH See Selection Chart ANSI/AAMI ES 60601-1:2005 (UL/cUL 3rd Edition), EN 60601-1:2006 (TUV/T-mark 3rd Edition) All specifications are typical at nominal input, full load, and 25°C unless otherwise noted WWW.ASTRODYNETDI.COM 1. Line regulation is defined by changing ±10% of input voltage from nominal line at rated load. 2. Load regulation is defined by changing ±40% of measured output load from 60% rated load. 3. Ripple & noise is measured by using 20MHz bandwidth limited oscilloscope and terminated each output with a 0.47uF capacitor at rated load and nominal line. * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 oscilloscope and terminated each output with a 0.47uF capacitor at rated load and nominal line. 6. Hold up time is measured from the end of the last charging pulse to the time which the main output drops down to low limit of main output at rated load and nominal line. 7. Efficiency is measured at rated load, and nominal line. 8. The specifics for testing the energy efficiency of this Series are outlined in a separate document titled "Test Method for Calculating the Energy Efficiency of Single-Voltage Interchangeable AC-DC and AC-AC Power Supplies (August 11, 2004)," which is available on the ENERGY STAR Website. 50 80 100 120 140 160 180 200 220 INPUT VOLTAGE (VAC) (FIG.1) INPUT VOLTAGE DERATING CURVE 240 260 280 110 100 90 80 70 AHP183 60 50 180W M e d i c a l Adapt ers f or H ealt h C are Ap p lica tio n s with PFC 40 30 series 20 MECHANICAL DIMENSIONS 10 DC OUTPUT CONNECTIONS 20 30 40 0 10 0 50 TEMPERATURE (°C) (FIG.2) TEMPERATURE DERATING CURVE -10 Coaxial Plug Dimensions are in mm (inches) 60 70 80 OUTPUT : 5.5mmCABLE outer RECOMMEND diameter +Vout 1. Selected output connectors please refer to Appendix. 2.1mm inner diameter, femaleand wire, -Vout 2. This series is required 11mm length, center “+”to use AWG#16/5C/4FT output cable. 3. The regulation and efficiency will be changed by modified output cable. MECHANICAL DIMENSIONS: ( UNIT: mm ) PACKING : 1. COM 1. Net weight: 894~952g approx. 2. COM 2. Optional output connectors available contact sales for details. 5 Pin DIN 1 3. Vout 4. COM 5. Vout Shell = GND 3 4 2 5 1. COM 2. COM 3. Vout 4. COM 5. Vout 8 Pin DIN 6. COM 7. Vout 8. Vout Shell = GND Output Cord Length is 48” and uses AWG#18x3C + AWG#16x3C Cables Rating Chart: Modify the Output Cord will effect Regulation and Efficiency (A) (mVp-p) (W) Min.~Max. Load (%) (%) (W) (ms) Protection Mode (VDC) 100 Hold-Up Time 110 No Load Consumption 100W External Medical Grade Power Supply Typ. Efficiency Output Current Total Regulation Ripple & Noise Maximum Output Power Voltage Range MODEL NO. DERATE CURVES NO ~Min. Load HPU180A-105 12.0 14.0 168 100 120 ±5 89 0.5 20 OLP HPU180A-107 19.0 9.47 180 100 190 ±3 92 0.5 20 OLP HPU180A-108 24.0 7.50 180 100 240 ±3 92 0.5 20 OLP 70 HPU180A-109 30.0 6.00 180 100 300 ±3 92 0.5 20 OLP HPU180A-110 60 33.0 5.455 180 100 330 ±3 93 0.5 20 OLP HPU180A-111 48.0 3.75 180 100 480 ±3 93 0.5 20 OLP LOAD (%) 90 80 50 80 100 -10 0 120 140 160 180 200 220 INPUT VOLTAGE (VAC) (FIG.1) INPUT VOLTAGE DERATING CURVE 240 260 280 110 100 90 80 70 60 50 40 30 20 10 0 10 20 30 40 50 TEMPERATURE (°C) (FIG.2) TEMPERATURE DERATING CURVE 60 70 80 OUTPUT CABLE RECOMMEND : 1. Selected output connectors and wire, please refer to Appendix. 2. This series is required to use AWG#18x3C+ AWG#16x3C/4FT output cable. 0416 3. The regulation and efficiency will be changed by modified output cable. WWW.ASTRODYNETDI.COM PACKING : 1. Net weight: 490~670g approx. ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458