March 6, 2007 SMD INDUCTOR DR355-4 SERIES Features z z z z z Low Profile Surface Mount Design Suitable for Reflow soldering Inductance Range from 90nH to 538nH Operating Temp. -40°C to +125°C Tinned Leads with Leaded Solder is Available (note 3) ELECTRICAL SPECIFICATIONS AT 25ºC PART NO. DR355-4-903 DR355-4-114 DR355-4-134 DR355-4-174 DR355-4-214 DR355-4-224 DR355-4-254 DR355-4-314 DR355-4-384 DR355-4-424 DR355-4-494 DR355-4-544 INDUCTANCE (nH) @ 0A @50MHz 90±5% @50MHz 111±5% @50MHz 130±5% @50MHz 169±5% @50MHz 206±5% @50MHz 222±5% @50MHz 246±5% @50MHz 307±5% @50MHz 380±5% @50MHz 422±5% @50MHz 491±5% @50MHz 538±5% DCR (mΩ) MAX. 15.0 15.0 20.0 25.0 30.0 35.0 35.0 35.0 50.0 60.0 65.0 90.0 MAX. RATED CURRENT (A) (TYP.) 3.5 3.5 3.0 3.0 3.0 3.0 3.0 3.0 2.5 2.5 2.0 2.0 MECHANICAL OUTLINES NOTE: 1. 2. 3. 4. All dimensions shown are in “mm”. Tape and reel quantity, 2000 pcs/reel For non-RoHS parts replace DR prefix with 42- (e.g. DR355-4 becomes 42-355-4) Terminal finish is compliant to RoHS requirements. Solder in accordance with J-STD-020C DATATRONIC: 28151 Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Toll Free Tel: 888-889-5391 Fax: 951-928-7701 Email: [email protected] 499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specifications are subject to change without notice.