AND4GA Ultra Bright LED Lamps: Type 2 Weight: 2.0 mg Unit: mm AND4GA Cathode Index 1.1 1.25 0.6 GaP Ultra Bright Green Light Emission Surface Mount Package • Small package size • 2.0 (l) x 1.25 (w) x 1.1 (h) size • Suitable for DIP and REFLOW soldering • Recommended Forward Current: 10 mA • RoHS Compliant 1.4 2.0 Features 0.4±0.2 Maximum Ratings (Ta = 25°C) Polarity R0.2 Characteristics Symbol Rating Unit Forward Current IF 30 mA Reverse Voltage VR 5 V Power Dissipation PD 100 mW Operating Temperature Range TOpr -40 to 85 °C Storage Temperature Range TStg -40to 90 °C Electro-Optical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Minimum Typical Maximum Unit Forward Voltage VF IF = 20 mA – 2.1 2.4 V Reverse Current IR VR = 5 V – – 10 µA Luminous Intensity IV IF = 20 mA 8.0 15 – mcd Peak Emission Wavelength lP IF = 20 mA – 570 – nm Spectral Line Half Width ∆λ IF = 20 mA – 30 – nm Dominant Wavelength λd IF = 20 mA – 571 – nm Full Viewing Angle θ IV = 1/2 Peak – 140 – degree Precaution Please be careful of the following: 1. Manual soldering: maximum temperature of iron tip: 260°C max. Soldering time: within 5 sec. per solder-land Soldering portion of lead: up to 1.6 mm from the body of the device 2. Reflow solder: recommended condition is as follows: 140 - 160°C The following soldering patterns are recommended for reflow soldering 230°C max. more than 2 min. Reflow 1.2 Temperature 10 sec. max. Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. 4°C/sec. max. Time 1.2 0.9 1.2 Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] www.purdyelectronics.com 7/18/07 AND4GA GaP Ultra Bright Green Light Emission Ultra Bright LED Lamps: Type 2 IV — IF IF — VF 100 10 5 3 1 1.6 Ta = 25°C 50 Ta = 25°C 30 Luminous Intensity IV (mcd) Forward Current IF (mA) 50 30 10 5 3 1 1.7 1.8 1.9 2.0 2.1 2.2 1 2.3 3 Forward Voltage VF (V) IV — TC 100 Relative Luminous Intensity — Wavelength 3 1.0 Relative Luminous Intensity Relative Luminous Intensity 10 5 30 50 Forward Current IF (mA) 1 0.5 0.3 0.1 -20 0 20 40 60 IF = 20 mA Ta = 25°C 0.8 0.6 0.4 0.2 0 520 80 540 560 580 600 620 640 Wavelength λ (nm) Case Temperature TC (°C) Radiation Pattern IF — Ta 20° 10° 0° 10° Ta = 25°C 20° 30° 30° 40° 40° 50° 50° 60° 60° 70° 70° 80° 80° Allowable Forward Current IF (mA) 40 30 20 10 90° 90° 0 0.2 0.4 0.6 0.8 0 0 20 40 60 80 Ambient Temperature Ta (°C) Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] www.purdyelectronics.com 100 7/18/07