ES1A DC COMPONENTS CO., LTD. R THRU RECTIFIER SPECIALISTS ES1G TECHNICAL SPECIFICATIONS OF SURFACE MOUNT SUPER FAST RECTIFIER VOLTAGE RANGE - 50 to 400 Volts CURRENT - 1.0 Ampere FEATURES * ldeal for surface mounted applications * Low leakage current * Glass passivated junction SMA ( DO-214AC) .062(1.60) .055(1.40) MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant *Terminals: Solder plated solderable per MIL-STD-750, Method 2026 * Polarity: As marked * Mounting position: Any * Weight: 0.064 gram .114(2.90) .098(2.50) .181(4.60) .157(4.00) .096(2.44) .078(2.00) .060(1.52) .030(.76) .008(0.203) .002(0.051) .208(5.28) .188(4.80) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) SYMBOL ES1A ES1B ES1C ES1D ES1E ES1G UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 150 200 300 400 Volts Maximum RMS Volts VRMS 35 70 105 140 210 280 Volts VDC 50 100 150 200 300 400 Maximum DC Blocking Voltage Maximum Average Forward Current at T A = 55 oC IO Peak Forward Surge Current I FM (surge): 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum Forward Voltage at 1.0A DC I FSM VF Maximum DC Reverse Current @T A = 25 o C at Rated DC Blocking Voltage @T A =100 o C Volts Amps 30 Amps 0.95 1.25 Volts 5.0 IR uAmps 100 Maximum Reverse Recovery Time (Note 1) trr Typical Junction Capacitance (Note 2) CJ Operating and Storage Temperature Range 1.0 T J , T STG 35 nSec 15 10 pF -65 to + 175 0 C NOTES : 1. Test Conditions: IF=0.5A, I R=1.0A, IRR=0.25A. 2. Measured at 1 MHZ and applied reverse voltage of 4.0 volts. 316 NEXT BACK NEXT EXIT BACK Q5G ErE EQ5 EQ5 ArE Q5D PARIMG AMD CHAPACREPIQRIC CSPTEQ - EQ5A RHPS EQ5G . DC COMPONENTS CO., LTD. P ,+. NEXT EXIT BACK NEXT EXIT BACK EXIT NEXT BACK