CRA06P Vishay Dale Thick Film Resistor Array FEATURES • • • • • Concave terminal array with square corners 8 terminal package with isolated resistors Wide ohmic range: 10R to 1M0 Lead (Pb)-free solder contacts on Ni barrier layer Pure tin plating provides compatibility with Lead (Pb)-free and lead containing soldering processes • Compatible with "Restriction of the use of Hazardous Substances" (RoHS) directive 2002/95/EC (issue 2004) • Operating temperature range of -55°C to +150°C CRA06P Thick Film resistor array is constructed on a high grade ceramic body with concave terminations. A small package enables the design of high density circuits. The single component reduces board space, component counts and assembly costs. STANDARD ELECTRICAL SPECIFICATIONS MODEL POWER RATING CRA06P CIRCUIT LIMITING ELEMENT TEMPERATURE TOLERANCE RESISTANCE E-SERIES P70°C VOLTAGE MAX. COEFFICIENT W V쓖 ppm/K % Ω 200 ± 2; ± 5 10R - 1M0 24 100 ±1 10R - 1M0 24 - 96 0.0625 03 50 RANGE Jumper: Zero-Ohm-Resistor available; R ≤ 50m Ω TECHNICAL SPECIFICATIONS CRA06P PARAMETER UNIT Rated Dissipation at 70°C Limiting Element Voltage 1) Insulation Voltage (1min) Category Temperature Range Insulation Resistance 1) Rated voltage: 03 CIRCUIT W V쓖 0.0625 50 100 - 55 to + 150 > 10 10 Vdc/ac peak °C Ω P*R PART NUMBER AND PRODUCT DESCRIPTION PART NUMBER: CRA06P08310K0JTA C R A 0 6 P 0 8 3 1 0 K 0 J T A MODEL TERMINAL STYLE PIN CIRCUIT VALUE TOLERANCE PACKING SPECIAL CRA06 P 08 3 = 03 R = Decimal K = Thousand M = Million 0000 = 0Ω Jumper F = ± 1% G = ± 2% J = ± 5% Z = 0Ω Jumper TA = RT1 TC = RT6 up to 2 digits PRODUCT DESCRIPTION: CRA06P 08 03 473 J RT1 e3 CRA06P 08 03 473 MODEL TERMINAL COUNT CIRCUIT TYPE RESISTANCE VALUE TOLERANCE PACKING1) LEAD (Pb)-FREE CRA06P 08 03 473 = 47KΩ 4702 = 47KΩ 10R0 = 10Ω 100 = 10Ω 000 = 0Ω Jumper F = ± 1% G = ± 2% J = ± 5% Z = 0Ω Jumper RT1 RT6 e3 = Pure Tin Termination Finish 1) Please refer to table PACKING, page 10. J e3 RT1 First two digits (three for 1 %) are significant. Last digit is the multiplier NOTE: Products can be ordered using either the Product Description or the Part Number. www.vishay.com 8 For Technical Questions, contact: [email protected] Document Number 31047 Revision 25-Jul-05 CRA06P Thick Film, Resistor Array Vishay Dale DIMENSIONS 4-Resistor Device PIN NO# A L A B C P T W 8 3.20 0.30 0.40 0.40 0.80 0.60 1.6 Tol ± 0.20 ± 0.20 ± 0.15 ± 0.20 - C w P B L DIMENSIONS [in millimeters] ± 0.10 ± 0.15 T SOLDER PAD DIMENSIONS [in millimeters] WAVE c c w p a b 0.8 2.6 0.8 0.4 0.9 w b p a DESCRIPTION ASSEMBLY Production is strictly controlled and follows a set of instructions The resistors are suitable for processing on automatic SMD established for reproducibility. A thick film layer is deposited assembly systems. They are suitable for automatic soldering on a high grade ceramic substrate. The resistor elements are using wave and solder paste reflow. Due to the design, arrays covered by a protective coating designed for electrical, have automatic placement capability. The resistors are Lead mechanical and climatic protection. The wrap around (Pb)-free, the pure tin plating provides compatibility with Lead terminations receive a final pure tin on nickel plating. (Pb)-free and Lead-containing soldering processes. All products comply with the CEFIC-EECA-EICTA list of legal The result of the determined production is verified by an extensive testing procedure. Only accepted products are laid restrictions on hazardous substances. This includes full compatibility with the following directives: directly into the paper tape in accordance with EIA 481. • 2000/53/EC End of Vehicle Life Directive (ELV) • 2000/53/EC Annex II to End of Vehicle Life Directive (ELV II) • 2002/95/EC Restriction of the use of Hazardous Substances Directive (RoHS) • 2002/96/EC Waste Electrical and Electronic Equipment Directive (WEEE) Solderability is specified for 2 years after production or requalification. The permitted storage time is 20 years. Document Number 31047 Revision 25-Jul-05 For Technical Questions, contact: [email protected] www.vishay.com 9 CRA06P Thick Film, Resistor Array Vishay Dale CIRCUIT 03 Circuit Rated Power % 8-pin 120 100 80 60 40 20 0 -55 -25 0 Derating 25 50 75 100 125 150 70 Ambient Temperature °C PACKING PACKING CODE MODEL TAPE WIDTH DIAMETER PIECES PITCH 8 mm 180 mm/7" 5 000 4 mm RT1 8 mm 330 mm/13" 20 000 4 mm RT6 PAPER TAPE CRA06P www.vishay.com 10 For Technical Questions, contact: [email protected] Document Number 31047 Revision 25-Jul-05 CRA06P Thick Film, Resistor Array Vishay Dale PERFORMANCE TEST CONDITIONS OF TEST Endurance Test at 70°C per EIA 575-3.14 1000 hours at 70°C, 1.5 hours "ON", 0.5 hours "OFF" ± 1.0 % Overload per EIA 575-3.6 Short time overload ± 0.5 % Thermal Shock per EIA 575-3.5 ± 0.5 % Moisture Resistance per EIA 575-3.10 ± 1.0 % Resistance to Soldering Heat EIA 575 3.8 10 seconds at 260°C solder bath temperature ± 1.0 % High Temperature Exposure per EIA 575-3.7 ± 1.0 % Low Temperature Operation per EIA-/ IS-30A-3.6 ± 0.5 % Solderability & Leaching EIA 575-3.12 Document Number 31047 Revision 25-Jul-05 For Technical Questions, contact: [email protected] TEST RESULTS 95 % Coverage www.vishay.com 11