ZW–06–13–L–D–787–118 F-217 (Rev 09MAR17) DW–11–20–T–D–825 HW–14–08–G–S–300–100 (2.54 mm) .100" DW, EW, ZW, HW-TH SERIES FLEXIBLE .025" SQ BOARD STACKERS Mates with: SSW, SSQ, ESW, ESQ, CES, SLW, BSW, BCS, SSM, HLE, PHF TYPE STRIP LEAD STYLE NO. PINS PER ROW PLATING OPTION Cable Mates: IDSS, IDSD, SMSD, SMSS SPECIFICATIONS For complete specifications see www.samtec.com?DW, www.samtec.com?EW, www.samtec.com?ZW or www.samtec.com?HW-TH Insulator Material: DW, EW, ZW: Black Glass Filled Polyester HW: Natural Liquid Crystal Polymer Terminal Material: Phosphor Bronze Plating: Au or Sn over 50 µ" (1.27 µm) Ni Operating Temp Range: -55 °C to +125 °C with Gold -55 °C to +105 °C with Tin RoHS Compliant: Yes Lead–Free Solderable: DW, EW, ZW: No, Lead Wave Only HW: Yes RECOGNITIONS For complete scope of recognitions see www.samtec.com/quality DW Specify LEAD STYLE from chart = (2.79 mm) .110" Tail POST (0.00).000 MIN (2.79) .110 OVERALL LENGTH EW (OAL) STACKER HEIGHT = (8.38 mm) .330" Tail TAIL (1.40) .055 MIN LEAD STYLE OAL – 07 (10.92) .430 – 08 (13.46) .530 – 09 (18.54) .730 –10 (21.08) .830 –11 (23.62) .930 –12 (26.16) 1.030 –13 (31.24) 1.230 –14 (36.32) 1.430 –15 (16.00) .630 –16 (11.30) .445 –17 (12.19) .480 –19 (33.78) 1.330 –20 (28.70) 1.130 ZW 50 02 TAIL LENGTH Note: For added mechanical stability, Samtec recommends mechanical board spacers be used in applications with gold or selective gold plated connectors. Contact [email protected] for more information. HW = High Temp Custom Tail (2.54) .100 x No. of Positions –S –“XXX” –“XXX” Example: –250 = (6.35 mm) .250" Example: –250 = (6.35 mm) .250" = Single Row = Stacker Height (in inches) (5.08 mm) .200" minimum –D = Double Row –T = Triple Row –Q ZW or HW TAIL LENGTH (1.40) .055 MIN –LL –L (2.54) .100 –S (2.54) .100 –D 100 01 99 03 150 (7.52) .296 (5.08) .200 01 –T or –Q* –Q* 148 (2.54) .100 = Same as -T except middle row of pins missing. = 10 µ" (0.25 µm) Gold on contact area of longer tail, Matte Tin on tail –G = 10 µ" (0.25 µm) Gold on contact area of longer tail, Gold flash on balance –T = Matte Tin (2.54) .100 TAIL LENGTH = ZW or HW Tail Length (in inches) (1.40 mm) .055" minimum STACKER HEIGHT (5.08) .200 MIN = Double Row .200" (5.08 mm) row space = Gold flash on contact, Matte Tin on tail 01 (5.08) .200 ALSO AVAILABLE • Other platings Contact Samtec. OTHER OPTIONS –F 01 thru 50 FILE NO: 090871_0_000 (MOQ Required) STACKER HEIGHT (8.38) .330 = Custom Tail FILE NO. E111594 ROW OPTION (0.64) .025 SQ TYP Note: This Series is non-standard, non-returnable. WWW.SAMTEC.COM Due to technical progress, all designs, specifications and components are subject to change without notice. = Locking Lead (Shortest dimension between the tail and the post is the end that will be crimped. Available on tails from (2.29 mm) .090" to (7.87 mm) .310" only.) Single row, 01 & 02 positions & –Q row not available –“XXX” = Polarized Specify omitted pin position