M18 Cylindrical Photoelectric
E3F2
Threaded Cylindrical M18 Size
Sensors with Built-in Amplifier
Rugged stainless and nickel plated
brass versions
Chemical resistant, ABS resin case type
Polarized models
Compact and space-saving
Long detection distance (7 m)
DC switching types with connectors for
easy maintenance
Wide operating voltage range
(10 to 30 VDC, or 24 to 240 VAC)
Short-circuit and reverse connection
protection (DC switching type)
UL, CSA listed and CE marked
Ordering Information
SENSORS
Supply
Type
Connection
Output
Range
Housing
Part number
AC
Through-beam
g
Pre-leaded
Light-On
3m
Plastic
E3F2-3Z1
Plastic
E3F2-3Z2
Plastic
E3F2-R2Z1
Plastic
E3F2-R2Z2
Plastic
E3F2-DS10Z1N
Plastic
E3F2-DS10Z2N
Plastic
E3F2-7C4-P1
NPB
E3F2-7C4-M1–C
SS
E3F2-7C4-M1-S
Plastic
E3F2-7B4-P1
NPB
E3F2-7B4-M1-C
SS
E3F2-7B4-M1-S
NPB
E3F2-DS10C4-M1-C
SS
E3F2-DS10C4-M1-S
Plastic
E3F2-DS10C4-P1
Plastic
E3F2-DS30C4-P1
Dark-On
Retroreflective,,
N
Non-polarized
l i d
Light-On
2m
Dark-On
Diffuse
Light-On
100 mm
Dark-On
DC
Through-beam
g
Connector
NPN
7m
PNP
Diffuse
NPN
10 cm
30 cm
Note: NPB = Nickel plated brass; SS = Stainless steel
(This table continues on the next page.)
E3F2
E3F2
Ordering Information Table – continued from previous page
Supply
Type
Connection
Output
Range
Housing
Part number
DC
Diffuse
Connector
PNP
10 cm
NPB
E3F2-DS10B4-M1-C
SS
E3F2-DS10B4-M1-S
Plastic
E3F2-DS10B4-P1
30 cm
Plastic
E3F2-DS30B4-P1
2m
Plastic
E3F2-R2C4-P1
Retroreflective,,
N
Non-polarized
l i d
NPN
PNP
Plastic
E3F2-R2B4-P1
Retroreflective,,
P l i d
Polarized
NPN
NPB
E3F2-R2RC4-M1-C
SS
E3F2-R2RC4-M1-S
NPB
E3F2-R2RB4-M1-C
SS
E3F2-R2RB4-M1-S
Plastic
E3F2-7C4
NPB
E3F2-7C4-C
SS
E3F2-7C4-S
Plastic
E3F2-7B4
NPB
E3F2-7B4-C
SS
E3F2-7B4-S
NPB
E3F2-DS10C4-C
Plastic
E3F2-DS10C4-N
SS
E3F2-DS10C4–S
30 cm
Plastic
E3F2-DS30C4
10 cm
NPB
E3F2-DS10B4-C
Plastic
E3F2-DS10B4-N
SS
E3F2-DS10B4-S
30 cm
Plastic
E3F2-DS30B4
2m
Plastic
E3F2-R2C4
Plastic
E3F2-R2B4
NPB
E3F2-R2RC4-C
SS
E3F2-R2RC4-S
NPB
E3F2-R2RB4-C
SS
E3F2-R2RB4-S
PNP
Through-beam
g
Pre-leaded
NPN
7m
PNP
Diffuse
7m
NPN
10 cm
PNP
Retroreflective,,
N
Non-polarized
l i d
NPN
Retroreflective,,
P l i d
Polarized
NPN
PNP
2m
PNP
Note: NPB = Nickel plated brass; SS = Stainless steel
ACCESSORIES (ORDER SEPARATELY)
Description
Part number
Sensor mounting bracket
Y92E-B18
Lens protector kit (glass plate, two gaskets and metal retainer)
E39-F31
Small corner cube reflector (38 H x 20 W x 11 D mm)
E39-R3
Adhesive backed reflector tape (10 H x 35 W x 0.7 D mm)
E39-RSA
Adhesive backed reflector tape (35 H x 40 W x 0.7 D mm)
E39-RSB
Mounting bracket for E39-R1 reflector
E39-L7
Right angle adapter for through-beam and retroreflective E3F2 sensors
E39-RU1
CONNECTOR CORDSETS
Connector type
Cable size
Length
Straight connector
Right angle connector
4-wire DC
Mi
Micro
Ch
Change
connector
22 AWG
2 m (6.56 ft)
Y96E-44SD2
Y96E-44RD2
5 m (16.40 ft)
Y96E-44SD5
Y96E-44RD5
10 m (32.8 ft)
Y96E-44SD10
Y96E-44RD10
2 m (6.56 ft)
XS2F-D421-D80-R
XS2F-D422-D80-R
5 m (16.40 ft)
XS2F-D421-G80-R
XS2F-D422-G80-R
Robotic cable with
M12 connector
t
2
E3F2
E3F2
REPLACEMENT PARTS
Description
Part number
Reflector for E3F2-R24 retroreflective sensors
E39-R1
Two plastic M18 mounting nuts
E3F-PHWS
Specifications
DC SWITCHING MODELS
Part number
E3F2-7C4-,
E3F2-7B4-
E3F2-R2C4-,
E3F2-R2B4-
Method of detection
Through-beam
g
Retroreflective
E3F2-R2RC4-,
E3F2-R2RB4-
E3F2-DS10C4-, E3F2-DS30C4-,
E3F2-DS10B4- E3F2-DS30B4-
Diffuse
Non-polarized
Polarized
2 m (6.56 ft)
Sensing range
7 m (22.96 ft)
2 m (6.56 ft)
Standard target
11 x 11 mm
56 x 56 mm
Supply voltage
10-30 VDC 10% maximum permissible ripple, peak-to-peak
Output
NPN or PNP open collector, 100 mA, residual voltage 2 V max. at 100 mA
Current consumption
45 mA max.
Response time
2.5 ms max.
30 cm (11.81 in)
5 x 5 cm 90%
Kodak White
Card
10 x 10 cm 90%
Kodak White
Card
25 mA max.
Stabilization on Powerup
50 ms
Ambient temperature
Operating
–25°C to 55°C (–13°F to 131°F) with no icing
Storage
–30°C to 70°C (–22°F to 158°F)
Incandescent: 3,000 x; Sunlight: 10,000 x
Ambient light immunity
Relative humidityy
10 cm (3.94 in)
Operating
35% to 85% RH, no condensation
Storage
35% to 95% RH
Insulation resistance
20 MΩ at 500 VDC
Dielectric strength
1,000 VAC, 50/60 Hz for 1 min. between current carrying parts and case
Vibration
10 to 55 Hz 1.5 mm double amplitude 1 hr each in X, Y, Z axes
Shock
500 m/s2 (approx. 50 G)
Enclosure
IP67, NEMA 6 for metal versions; IP66 NEMA, 4 for plastic versions
Light source
Infrared LED
Indicators
Power and light received LEDs
Sensitivity adjustment
Fixed
Operation mode
Light-ON or Dark-ON selectable with control wire
Weight
g
Infrared LED
Adjustable
Metal
Pre-leaded 100 g; connector: 60 g
Plastic
Pre-leaded 85 g; connector: 40 g
Circuit protection
Materials
Red LED
Output short-circuit and reverse polarity
Lens
Plastic
Housing
Plastic (ABS),
nickel plated
brass, stainless
steel
Cable sheath
PVC
Plastic
Nickel plated
brass, stainless
steel
Plastic (ABS), nickel plated brass,
stainless steel
3
E3F2
E3F2
AC MODELS
Part number
E3F2-3Z1, E3F2-3Z2
E3F2-R2Z1, E3F2-R2Z2
E3F2-DS10Z1N, E3F2-DS10Z2N
Method of detection
Through-beam
Retroreflective
Diffuse
Sensing range
3 m (9.84 ft)
2 m (6.56 ft)
10 cm (3.94 in)
Standard target
11 mm
56 mm
10 x 10 cm 90% Kodak white card
Supply voltage
24–240 VAC ±10%, 50/60 Hz
Output
SCR 200 mA max.; residual voltage 5 V max. at 200 mA
Power consumption
10 mA max.
Response time
30 ms max.
5 mA max.
Stabilization on Powerup
100 ms
Ambient temperature
Operating
–25°C to 55°C (–13°F to 131°F) with no icing
Storage
–30°C to 70°C (–22°F to 158°F)
Incandescent: 3,000 x; sunlight: 10,000 x
Ambient light immunity
Relative humidityy
Operating
35% to 85% RH, no condensation
Storage
35% to 95% RH
Insulation resistance
20 MΩ at 500 VDC between current carrying parts and case
Dielectric strength
1,500 VAC, 50/60 Hz for 1 min. between current carrying parts and case
Vibration
10 to 55 Hz 1.5 mm double amplitude 2 hrs each in X, Y, Z axes
Shock
500 m/s2 (approx. 50 G)
Enclosure
IP66, NEMA 1, 2, 4 (indoor)
Light source
Infrared LED
Indicators
Power and light received LEDs
Sensitivity adjustment
Fixed
Operation mode
Weight
g
Light-ON (Z1 models) or Dark-ON (Z2 models)
Pre-leaded models 110 g
Connector models
Circuit protection
Materials
4
55 g
—
Lens
Acrylate resin
Housing
Plastic ABS
Cable sheath
PVC
E3F2
E3F2
Engineering Data
OPERATING RANGE (TYPICAL)
E3F2-3- (Through-beam)
E3F2-R2- (Retroreflective)
Operating position Y (cm)
Operating position Y (cm)
Y
X
Y
X
Distance X (m)
Distance X (m)
E3F2-3 and E39-RU1 (Right angle adapter)
E3F2-R2 and E39-RU1 (Right angle adapter)
80
150
60
100
40
50
20
0
0
0
05
1
15
2
25
3
35
4
45
05
0
1
15
2
25
3
-20
-50
-40
-100
-60
-150
-80
Distance X (m)
Distance X (m)
E3F2-R2R-4 (Polarized, retroreflective)
40
10
30
8
20
10
0
0
1
2
3
4
5
–10
–20
6
7
8
9
Operating position Y (cm)
Operating position Y (cm)
E3F2-7-4 (Through-beam)
6
4
2
0
0,0
0,5
1,0
1,5
2,0
2,5
3,0
3,5
4,0
–2
–4
–6
–30
–8
–40
Distance X (m)
–10
Distance X (m)
5
E3F2
E3F2
E3F2-DS104-N
E3F2-DS104-P1
E3F2-DS30- (Diffuse)
White
paper
(5 x
5 cm)
Y
10
X
5
0
–5
–10
–15
0
20
40
60
80
White
paper
(10 x
10 cm)
Y
Operating position Y (cm)
Operating position Y (mm)
15
100
X
120
Distance X (mm)
Distance X (cm)
EXCESS GAIN VS. SET DISTANCE (TYPICAL)
E3F2-3- (Through-beam)
E3F2-R2- (Retroflective, Non-polarized)
DC type
DC type
Excess gain ratio
Excess gain ratio
AC type
AC type
Distance (m)
Distance (m)
E3F2-3 and E39-RU1 (Right angle adapter)
E3F2-R2 and E39-RU1 (Right angle adapter)
50.0
20.0
45.0
18.0
DC Type
40.0
16.0
35.0
14.0
30.0
12.0
25.0
20.0
10.0
AC Type
8.0
15.0
6.0
10.0
4.0
5.0
1.0
0.0
2.0
1.0
0.0
0
0
1
2
3
4
Distance (m)
6
5
6
7
DC Type
AC Type
0.5
1
1.5
2
Distance (m)
2.5
3
3.5
E3F2
E3F2
E3F2-74- (Through beam)
E3F2-R2R4- (Polarized retroreflective)
Excess gain ratio
Excess gain ratio
100
10
1
0,1
0
2
4
6
8
10
12
14
Distance (m)
Distance (m)
EXCESS GAIN VS. SET DISTANCE
E3F2-DS10Z-N
E3F2-DS104-N
E3F2-DS104-P1
9
E3F2-DS304
E3F2-DS304-P1
30
50
45
8
25
40
6
5
4
3
2
Sensing object
(white paper: 5
x 5 cm)
1
20
40
20
Sensing object
(white paper: 5
x 5 cm)
15
10
Sensing object
(black paper: 5
x 5 cm)
5
35
30
Sensing object
(white paper:
10 x 10 cm)
25
20
15
Sensing object
(black paper:
10 x 10 cm)
10
5
0
0
Excess gain ratio
Sensing object
(black paper: 5
x 5 cm)
Excess gain ratio
Excess gain ratio
7
60
80
Distance (mm)
100
120
0
0
0
20
40
60
80
Distance (mm)
100
120
0
10
20
30
40
50
60
Distance (cm)
7
E3F2
E3F2
Operation
OUTPUT CIRCUITS
Configuration
Model
Connection
method
Output
transistor
NPN
pre-wired
E3F2-7C4
E3F2-7C4-M
E3F2-7C4-C
E3F2-7C4-S
E3F2-R2C4
E3F2-R2RC4-M
E3F2-R2RC4-C
E3F2-R2RC4-S
E3F2-DS10C4-N
E3F2-DS10C4-M
E3F2-DS10C4-C
E3F2
DS10C4 C
E3F2 DS10C4 S
E3F2-DS10C4-S
E3F2-DS30C4
E3F2-DS30C4-M
E3F2-DS30C4-S
Connect the
pink and
brown wires
or open the
pink wire.
ON when
light is
incident.
(Light-ON)
Output circuit
Brown (1) (see note)
Light indicator
(Mode selection)
Pink (2)
Red
Main
circuit
Black
(4)
Load
100 mA max.
(control output)
10 to
30 VDC
ZD
Blue (3)
ZD:VZ = 36 V
Connect the
pink and
blue wires.
ON when
light is interrupted.
(Dark-ON)
Brown (1) (see note)
Light indicator
(Mode selection)
Pink (2)
Red
Main
circuit
Load
Black
(4)
100 mA max.
(control output)
Blue
(3)
10 to
30 VDC
ZD
ZD:VZ = 36 V
PNP
pre-wired
E3F2-7B4
E3F2-7B4-M
E3F2-7B4-C
E3F2-7B4-S
E3F2-R2B4
E3F2-R2RB4-M
E3F2-R2RB4-C
E3F2-R2RB4-S
E3F2-DS10B4-N
E3F2-DS10B4-M
E3F2-DS10B4-C
E3F2-DS10B4-S
E3F2-DS30B4
E3F2-DS30B4-M
E3F2-DS30B4-S
Connect the
pink and
brown wires
or open the
pink wire.
ON when
light is
incident.
(Light-ON)
Brown (1) (see note)
Light indicator
Pink (2)
ZD
Red
Main
circuit
(Mode selection)
Black (4)
Blue
100 mA max.
(control
Load
output)
(3)
10 to
30 VDC
ZD:VZ = 36 V
Connect the
pink and
blue wires.
ON when
light is interrupted.
(Dark-ON)
Brown (1) (see note)
Light indicator
Pink
(2) (Mode selection)
ZD
Red
Main
circuit
Black
Blue
(4)
100 mA max.
(control
output)
Load
(3)
10 to
30 VDC
ZD:VZ = 36 V
NPN
connector
E3F2-7C4-P1
E3F2-7C4-M1-M
E3F2-7C4-M1-C
E3F2-7C4-M1-S
E3F2-R2C4-P1
E3F2-R2RC4-M1
-M
E3F2-R2RC4-M1
-C
E3F2-R2RC4-M1
-S
E3F2-DS10C4P1
E3F2-DS10C4M1-M
E3F2-DS10C4M1-C
E3F2-DS10C4M1-S
E3F2-DS30C4P1
E3F2-DS30C4M1-M
E3F2-DS30C4M1-S
Connect the
pink and
brown wires
or open the
pink wire.
ON when
light is
incident.
(Light-ON)
Brown (1) (see note)
Light indicator
Pink (2)
Red
Main
circuit
Black
(4)
Load
100 mA max.
(control output)
10 to
30 VDC
ZD
Blue (3)
ZD:VZ = 36 V
Connect the
pink and
blue wires.
ON when
light is interrupted.
(Dark-ON)
Brown (1) (see note)
Light indicator
Pink (2)
Red
Main
circuit
(Mode selection)
100 mA max.
(control output)
Blue
(3)
ZD:VZ = 36 V
(This table continues on the next page.)
Load
Black
(4)
ZD
Note: Terminal numbers are for connector types.
8
(Mode selection)
10 to
30 VDC
E3F2
E3F2
Operation Table – continued from previous page
Configuration
Model
Connection
method
Output
transistor
PNP
connector
E3F2-7B4-P1
E3F2-7B4-M1-M
E3F2-7B4-M1-C
E3F2-7B4-M1-S
E3F2-R2B4-P1
E3F2-R2RB4-M1
-M
E3F2-R2RB4-M1
-C
E3F2-R2RB4-M1
-S
E3F2-DS10B4P1
E3F2-DS10B4M1-M
E3F2-DS10B4M1-C
E3F2-DS10B4M1-S
E3F2-DS30B4P1
E3F2-DS30B4M1-M
E3F2-DS30B4M1-S
Connect the
pink and
brown wires
or open the
pink wire.
ON when
light is
incident.
(Light-ON)
E3F2-3Z1
E3F2-R2Z1
E3F2-DS10Z1-N
--- (Fixed)
AC switching
Output circuit
Brown (1) (See Note.)
Light indicator
Pink (2)
(Mode selection)
ZD
Red
Main
circuit
Black
(4)
100 mA max.
(control
Load
output)
(3)
Blue
10 to
30 VDC
ZD:VZ = 36 V
Connect the
pink and
blue wires.
ON when
light is interrupted.
(Dark-ON)
Brown (1) (See Note.)
Light indicator
(2) (Mode selection)
Pink
ZD
Red
Main
circuit
Black
(4)
100 mA max.
(control
output)
Load
10 to
30 VDC
(3)
Blue
ZD:VZ = 36 V
E3F2-3Z2
E3F2-R2Z2
E3F2-DS10Z2-N
ON when
light is
incident.
(Light-ON)
ON when
light is interrupted.
(Dark-ON)
Brown
Light indicator
Load
Red
Main
circuit
Black
200 mA max.
(control output)
24 to
240 VAC
Blue
Note: Terminal numbers are for connector types.
TIMING CHART
Light-ON Mode
Dark-ON Mode
Light indicator
(red)
ON
OFF
Light indicator
(red)
Control
output
ON
OFF
Control
output
Load
(relay)
Mode selector
Incident
Interrupted
Incident
Interrupted
Operate
Release
Load
(relay)
Terminals/Connections
Vcc
ON
OFF
ON
OFF
2
1
3
4
Operate
Release
0V
Output
9
E3F2
E3F2
Dimensions
Unit: mm (inch)
PRE-LEADED DC MODELS
65 (2.56)
49.3 (1.94)
42.3 (1.67)
37 (1.46)
24
(0.94)
Receiver
5 dia.
6.2
(0.24)
Emitter
(or receiver on
through-beam)
E3F2-74-
E3F2-DS104-
E3F2-DS304
E3F2-R24
E3F2-R2R4-
22
(0.87)
8
(0.31)
M18 x 1
Diffuse and Retroreflective (DC)
Polyvinyl chloride-covered cord, 4-mm dia. (18/0.12),
4-conductor (brown, blue, black, and pink)
Standard length: 2 m
Through-beam (DC)
16.8 dia.
Emitter: Polyvinyl chloride-covered cord, 4-mm dia.
(18/0.12), 2-conductor (brown and blue)
Standard length: 2 m
Receiver: Polyvinyl chloride-covered cord, 4-mm dia.
(18/0.12), 4-conductor (brown, blue, black,
and pink)
Standard length: 2 m
Sensitivity adjuster on
DS 30 diffuse models only
Light indicator
3.1
(0.12)
CONNECTOR DC MODELS
E3F2-7L-P1
E3F2-7D-P1
E3F2-7C4-P1, -M1-
E3F2-DS104-P1, -M1
E3F2-DS304-P1, -M1
E3F2-R2-P1
E3F2-R2R-M1-
12.4
(0.49)
A
B
24
(0.94)
16.8
Lens
49.3 (1.94)
42.3 (1.67)
8.2
37 (1.46)
5 dia.
6 dia.
6.2
10.5 dia.
Optical axis
22
(0.87)
4 M18 x 1
5
8
Metal body
Plastic body
E3F2-DS-1
E3F2-DS304-P1
A
76 (2.99)
73 (2.87)
B
65.5 (2.58)
61.7 (2.43)
16.8 dia.
Sensitivity adjuster on
DS 30 diffuse models only
Light indicator
Nameplate
10
M12 x 1
E3F2
E3F2
AC MODELS
E3F2-3Z1, E3F2-3Z2
E3F2-R2Z1, E3F2-R2Z2
E3F2-DS10Z1-N,
E3F2-DS10Z2-N
Through-beam (AC)
Emitter: Polyvinyl chloride-covered cord, 4-mm
dia. (11/0.16), 2-conductor (brown and
blue)
Standard length: 2 m
Receiver: Polyvinyl chloride-covered cord, 4-mm
dia. (11/0.16), 3-conductor (brown,
blue, and black)
Standard length: 2 m
Diffuse and Retroreflective (AC)
Vinyl insulated round cord, 4-mm dia. (11/0.16),
3-conductor (brown, blue, and black)
Standard length: 2 m
90 (3.54)
24
(0.95)
Receiver
22
(0.87)
5
6.2
(0.24)
67.3 (2.65)
62 (2.44)
M18 x 1
8
4
Emitter
5 dia.
16.8 dia.
Light indicator
3.1
(0.12)
ACCESSORIES
E39-R1 Reflector (included with retroreflective units)
7.5 (0.30)
2.7 (0.11)
E39-L7 Reflector Adapter (order separately)
34 (1.34)
7 (0.28)
12
(0.47)
39.3 (1.55)
34 (1.34)
2-3.5 (0.14)
dia.
Nut (M5)
52 59.9
(2.05) (2.36)
52
(2.05)
59
(2.32)
M5
Spring washer (M5)
1.6
(0.06)
8 (0.31)
2-M3
E39-R3 Reflector (order separately)
Mounting Bracket for E39-R3
(included with E39-R3)
29 (1.14)
4.5
(0.18)
11
(0.43) Adhesive
side
R20
3.4
(0.14)
13.7
18.45
28
(1.10)
22.9
(0.90)
20
(0.79)
0.2
(0.008)
34.8
(1.37)
19.3
(0.76)
Two, M3
1.2 (0.05)
2.6
(0.10)
20 0.2
(0.79)
11
25.4±0.1
41.8
(1.65)
0.2
16 (0.63)
Two, M3
34
(1.34)
25.4
(1.00)
38
(1.50)
14°
7
38
(1.50)
Two, 3.2 dia.
R25.4
34
(1.34)
3.4
10.1
1.2
(0.05)
1.2
10°
11
E3F2
E3F2
E39-RSA Reflector
E39-RSB Reflector
35 (1.38)
33 (1.30)
10 (0.39)
40 (1.57)
38 (1.50)
0.7 (0.03)
0.7 (0.03)
8
Four, R1
33
(1.30)
Adhesive
Reflecting tape
surface
35
(1.38)
Adhesive
tape
Four, R1
E39-RU1 Right Angle Adapter
Reflecting
surface
4.0 (0.16)
10.6 (0.42)
30 TYP.
6x2 mm
16.0 (0.63)
15.7 (0.62)
23.9 (0.94)
8.9 (0.35)
18.5 (0.73)
3.3 (0.13)
3.0 (0.12)
20.5 (0.81)
45°
6.1
(0.24)
28.7 (1.13)
9.2
(0.36)
14.1
(0.56)
5-40 SUS set screw
45°x0.5 all around
M18x1 internal threads
22.0 (0.87)
24.6 (0.97)
Mounting E39-RU1
Do not exceed a torque value of 20 kg cm (2.0 N m, 17.4 in lbs) when tightening the adapter onto the sensor.
Use a 1/16” (1.5 mm) hex key on the set screw to secure the adapter to the E3F2. Do not exceed a torque of 3.5 kg cm (0.35 N m, 3.0
in lbs). When set properly, the set screw will still extend beyond the adapter wall. Make sure to loosen the set screw before removing the
adapter from the sensor.
12
E3F2
E3F2
Y92E-B18 Mounting Bracket
32±0.2
(1.26±0.008)
17 (0.67) max.
47 (1.85) max.
7 (0.28)
Note:
30
(1.18)
18 (0.71)
dia.
Hexagonal nut: M5 x 32
Material: plastic
E39-F31 Lens Cap
Glass plate
4 (0.16) max.
20 (0.79) dia.
Metal rim
E3F2
Gasket
OPTIONAL CONNECTOR CABLES
Straight Connector Cable
Right Angle Connector Cable
Y96E-44SD
Y96E-44RD
14.67
(0.58)
26.65
(1.05)
34.92
(1.37)
14.67
(0.58)
Aluminum
coupling nut
Silver-plated
copper contacts
Silver-plated
copper contacts
22 AWG, PVC jacketed cable rated for 300 V, 90°C:
2 m (6.56 ft) length for Y96E-44SD2
5 m (16.40 ft) length for Y96E-44SD5
10 m (32.81 ft) length for Y96E-44SD10
Aluminum
coupling nut
22 AWG, PVC jacketed cable rated for 300 V, 90°C:
2 m (6.56 ft) length for Y96E-44RD2
5 m (16.40 ft) length for Y96E-44RD5
10 m (32.81 ft) length for Y96E-44RD10
Note: Cable may be extended to a maximum of 200 m (656 ft.)
Assembly Directions
Terminals/Connections
Pin configuration NPN
10–30 VDC
4
1
3
2
max. 100 mA
to
1
0
Light-ON
to
3
Dark-ON
Viewed from
pinside of
connector
Pin configuration PNP
max. 100 mA
10–30 VDC
Insert the M12 threaded end of the
sensor into socket of connector so
that the notch correctly aligns the
pins. Tighten the coupling nut by
hand, not using a tool, until all the
threads on the rear of the sensor
are covered. This assures a positive connection, important for installations with vibration.
Connector
Cable
Brown Pin 1 VDC
Black Pin 4 Output
Blue Pin 3 0V
Pink (White) Pin 2
Mode Selection
4
1
3
2
to
1
to
3
0
Viewed from
Light-ON pinside of
connector
Dark-ON
Note: Water tightness with connector is only valid when authorized connections are
used. Cordset wire colors are shown in parentheses.
13
E3F2
E3F2
Precautions
When using the Photoelectric Sensor at temperatures over 45°C,
the load current must be within the rated value shown in the
figure below.
200
Load current (mA)
If the input/output lines of the Photoelectric Sensor are placed in
the same conduit or duct as power lines or high-voltage lines, the
Photoelectric Sensor could be induced to malfunction, or even be
damaged, by electrical noise. Separate the wiring, or use
shielded lines as input/output lines to the Photoelectric Sensor.
Do not subject the Photoelectric Sensor to excessive shock when
mounting, in keeping with IEC60529 IP66 standards.
Do not connect the black wire to the brown wire without a load.
Direct connection of these wires may damage the Photoelectric
Sensor (AC switching type).
Brown
0
Load
Sensor
130
45
55
Operating temperature (°C)
24 to 240 VAC
Black
MOUNTING
Do not exceed a torque of
Blue
! WARNING
The E3F2 Photoelectric Sensor is not a safety component for
ensuring the safety of people which is defined in EC Directive
(91/368/EEC) and covered by separate European standards
or by any other regulations or standards.
•
2.0 N m {20 kgf cm} 17.7 in lb when tightening mounting nuts
for plastic models.
•
20.0 N m {200 kgf cm} 177 in lb when tightening mounting
nuts for metal models.
When using the Photoelectric Sensor in the vicinity of an inverter
motor, be sure to connect the ground wire of the motor to earth.
Failure to ground the motor may result in malfunction of the
Sensor.
NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4.
OMRON ELECTRONICS, INC.
OMRON CANADA, INC.
One East Commerce Drive
Schaumburg, IL 60173
885 Milner Avenue
Scarborough, Ontario M1B 5V8
1-800-55-OMRON
416-286-6465
Cat. No. CEDSAX3
10/99
Specifications subject to change without notice.
Printed in U.S.A.