POWER AIF - PFC Series 1600 Watts Data Sheet Total Power: 1600 Watts 120 - 370 VDC (Configurable) Input Voltage: 85 - 264 VAC # of Outputs: Single SPECIAL FEATURES Unity power factor High efficiency - up to 95% Universal input voltage and frequency range Up to 1600 W output power Positive and Negative enable function Parallelable with accurate current sharing <10% harmonic distortion conforming to IEC1000-3-2 Compliance 100°C baseplate operating temperature DC Input option Power fail warning signal Enable output to control DC-DC Converter EEPROM data storage via I2C Interface External inrush current limited protection Power density up to 290 W/in3 Two year warranty SAFETY UL cUL TUV 60950 Recognized 60950 Recognized EN60950 Licensed Electrical Specifications Input Input range 85 - 264 Vac / 120 - 370 Vdc (configurable) Input surge 290 Vac / 1s Input Frequency 50/60 Hz Efficiency 95% @ 230 Vac, 1600 W (typical) Total Harmonic Distortion Less than 10% Power Factor 0.99 typical (Po ± 500 W); 0.97 typical (Po ± 1000 W) Output Output Voltage 380V typical (Io =4.2 A / Vi > 180 Vac); 393 V typical (Io = 0A) Note: Vin peak must always be lower than Vout Current Share Accuracy 10% max Overvoltage Protection 430 max Power Limit for AC input for DC input Vin = 85 Vac, Pmax = 1000W; Vin = 230 Vac, Pmax = 1600W Case; Vin = 370 Vdc, Pmax =1600W Control Power Fail Warning Direct drive output to opto-isolator Power Fail Warning Adjust 195 to 355 Vdc adjustable LD Enable Direct drive output to opto-isolator PFC Enable TTL compatiable Voltage Adjust 76% to 100% Vo DC Input Enable Clock Input (external sync) 6 Vp-p typical @ 1 MHz ± 5% Clock Output (int. clock) 6 Vp-p typical @ 1 MHz ± 5% Temperature Monitor Output 10 mV/°C Current Monitor Output 0 to 1 mA (1 mA = 4.2 A output) I2C Interface Notes: Nominal values apply with sense pins disconnected and other control pin unconnected. AIF-PFC Series Data Sheet Environmental Specifications Operating temperature -20 °C to +100 °C (baseplate temperature) Startup temperature -40 °C to +100 °C (baseplate temperature) Storage temperature -40 °C to +120 °C Overtemperature protection 120 °C max MTBF 1million hours Ordering Information Model Number Description Notes AIF04ZPFC-01L 1600 W Low Profile PC Module For parallel operation the total input current must be <16Arms. AIF04ZPFC-02L 1600 W Low Profile PC Module Designed for parallel operation where the total input current >16Arms, requires external rail rectifiers. AIF04ZPFC-01NL Negative Enable AIF04ZPFC-01NL Negative Enable 1. Fon Non-thread hole, add suffix “-NT”. Pin Assignments Input (AC) Output Control Pins 31. L1 21. Positive 1. PV Aux - 32. L1 22. Positive 2. Temp Mon 33. L2 23. Negative 3. C Mon 34. L2 24. Negative 4. C Share 5. Clk Out 6. Clk In 7. PV Aux + 8. SDA 9. SCL 10. DC Enable 11. V Adj 12. PFW Adj 13. S Gnd 14. PFW 15. LD Enable 16. PF Enable AIF-PFC Series Data Sheet Mechanical Drawings WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 2900 S.Diablo Way Tempe, AZ 85282 USA +1 888 412 7832 Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 (0) 1384 842 211 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong +852 2176 3333 While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. © 2015 Artesyn Embedded Technologies, Inc. www.artesyn.com For more information: www.artesyn.com/power For support: [email protected] AIF-PFC Series-DS 11Feb2015