2016-01-04 Silicon NPN Phototransistor Arrays Version 1.3 BPX 80, BPX 82 ... BPX 89 Features: • Spectral range of sensitivity: (typ) 450 ... 1100 nm • Package: Miniature Array, Epoxy • Special: Multiple-digit array package • High linearity • Available in groups Applications • Miniature photointerrupters • Industrial electronics • For control and drive circuits 2016-01-04 1 Version 1.3 BPX 80, BPX 82 ... BPX 89 Ordering Information Type: Photocurrent Ordering Code IPCE [µA] λ = 950 nm, Ee = 0.5 mW/cm2, VCE = 5 V BPX 82 > 320 Q62702P0021 BPX 83 > 320 Q62702P0025 BPX 84 > 320 Q62702P0030 BPX 85 > 320 Q62702P0031 BPX 86 > 320 Q62702P0022 BPX 87 > 320 Q62702P0032 BPX 88 > 320 Q62702P0033 BPX 89 > 320 Q62702P0026 BPX 80 > 320 Q62702P0028 Note: Only one bin within one packing unit (variation less than 2:1) 2016-01-04 2 Version 1.3 BPX 80, BPX 82 ... BPX 89 Maximum Ratings (TA = 25 °C) Parameter Symbol Values Unit Operating and storage temperature range Top; Tstg -40 ... 80 °C Collector-emitter voltage VCE 35 V Collector current IC 50 mA Collector surge current (τ < 10 µs) ICS 200 mA Emitter-collector voltage VEC 7 V Total Power dissipation Ptot 90 mW Thermal resistance RthJA 750 K/W Electrostatic discharge (acc. to ANSI/ ESDA/ JEDEC JS-001 - HBM) VESD 2000 V Characteristics (TA = 25 °C) Parameter Symbol Values Unit 850 nm Wavelength of max. sensitivity (typ) λS max Spectral range of sensitivity (typ) λ10% Radiant sensitive area (typ) A 0.11 mm2 Dimensions of chip area (typ) LxW (typ) 0.55 x 0.55 mm x mm Half angle (typ) ϕ ± 18 ° Capacitance (VCE = 0 V, f = 1 MHz, E = 0) (typ) CCE 7.5 pF Dark current (VCE = 20 V, E = 0) (typ (max)) ICE0 1 (≤ 50) nA Rise and fall time (IC = 1 mA, VCC = 5 V, RL = 1 kΩ) (typ) 6 µs 2016-01-04 3 tr, tf (typ) 450 ... 1100 nm Version 1.3 BPX 80, BPX 82 ... BPX 89 Grouping (TA = 25 °C, λ = 950 nm) Group Min Photocurrent Max Photocurrent Typ Photocurrent Rise and fall time Ee = 0.5 mW/cm2, VCE = 5 V Ee = 0.5 mW/cm2, VCE = 5 V EV = 1000 lx, Std. Light A, VCE = 5 V IC = 1 mA, VCC = 5 V, RL = 1 kΩ IPCE, min [µA] IPCE, max [µA] IPCE [µA] tr, tf [µs] -A 320 630 1500 5.5 -B 400 800 1900 6 -C 500 2300 8 Group Collector-emitter saturation voltage IC = IPCEmin x 0.3, Ee = 0.5 mW/cm2 VCEsat [mV] -A 150 -B 150 -C 150 Note.: IPCEmin is the min. photocurrent of the specified group. For delivery the components are marked -A, -B, -C. Due to differing yields, it is not possible to order a definite group. Relative Spectral Sensitivity 1) page 10 Srel = f(λ) 100 Photocurrent 1) page 10 IPCE = f(Ee), VCE = 5 V OHF04048 Srel % 80 70 60 50 40 30 20 10 0 400 500 600 700 800 900 nm 1100 λ 2016-01-04 4 Version 1.3 BPX 80, BPX 82 ... BPX 89 Photocurrent 1) page 10 IPCE / IPCE(25°C) = f(TA), VCE = 5 V Dark Current 1) page 10 ICEO = f(VCE), E = 0 OHF04049 10 1 nA I CEO 10 0 10 -1 10 -2 0 5 10 15 20 25 30 V 35 VCE Dark Current 1) page 10 ICEO = f(TA), E = 0 Collector-Emitter Capacitance 1) page 10 CCE = f(VCE), f = 1 MHz, E = 0 OHF04050 10 4 nA OHF04051 8 pF C CE 7 I CEO 10 3 6 10 2 5 10 1 4 3 10 0 2 10 -1 1 10 -2 -25 0 25 50 0 -3 10 75 ˚C 100 TA 2016-01-04 10 -2 10 -1 10 0 10 1 V 10 2 VCE 5 Version 1.3 BPX 80, BPX 82 ... BPX 89 Power Consumption Ptot = f(TA) Directional Characteristics 1) page 10 Srel = f(ϕ) 2016-01-04 6 Version 1.3 BPX 80, BPX 82 ... BPX 89 Package Outline Dimensions in mm. 2016-01-04 7 Version 1.3 BPX 80, BPX 82 ... BPX 89 Transistors Number of Transistors per Array Dimensions "B" 2 4.5 ... 4.9 3 7.0 ... 7.4 4 9.6 ... 10.0 5 12.1 ... 12.5 6 14.6 ... 16.0 7 17.2 ... 17.6 8 19.7 ... 20.1 9 22.3 ... 22.7 10 24.8 ... 25.2 Package Miniature Array, Epoxy Approximate Weight: 0.2 g TTW Soldering IEC-61760-1 TTW OHA04645 300 10 s max., max. contact time 5 s per wave ˚C T 250 235 ˚C - 260 ˚C First wave Second wave Continuous line: typical process Dotted line: process limits ∆T < 150 K 200 Cooling Preheating ca. 3.5 K/s typical 150 ca. 2 K/s 130 ˚C 120 ˚C 100 ˚C 100 ca. 5 K/s Typical 50 0 0 20 40 60 80 100 120 140 160 180 200 220 s 240 t 2016-01-04 8 Version 1.3 BPX 80, BPX 82 ... BPX 89 Disclaimer Language english will prevail in case of any discrepancies or deviations between the two language wordings. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components* may only be used in life-support devices** or systems with the express written approval of OSRAM OS. *) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. **) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered. 2016-01-04 9 Version 1.3 BPX 80, BPX 82 ... BPX 89 Glossary 1) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 2016-01-04 10 Version 1.3 BPX 80, BPX 82 ... BPX 89 Published by OSRAM Opto Semiconductors GmbH Leibnizstraße 4, D-93055 Regensburg www.osram-os.com © All Rights Reserved. 2016-01-04 11