1.6X0.8mm SMD CHIP LED LAMP PRELIMINARY SPEC Part Number: APT1608VGC/A GREEN ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description 1.6mmX0.8mm SMT LED, 0.75mm THICKNESS. The Green source color devices are made with InGaN on LOW POWER CONSUMPTION. G-SiC Light Emitting Diode. W IDE VIEW ING ANGLE. Static electricity and surge damage the LEDS. IDEAL FOR BACKLIGHT AND INDICATOR. It is recommended to use a wrist band or anti-electrostatic VARIOUS COLORS AND LENS TYPES AVAILABLE. glove when handling the LEDs. PACKAGE: 2000PCS / REEL . All devices, equipment and machinery must be electrically MOISTURE SENSITIVITY LEVEL : LEVEL 3. grounded. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. SPEC NO: DSAG5362 REV NO: V.1 DATE: JUN/09/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 1 OF 5 ERP: 1203004735 Selection Guide Dice Part No. APT1608VGC/A Iv (mcd) [2] @ 20mA Lens Type GREEN (InGaN) WATER CLEAR Viewing Angle [1] Min. Typ. 2 θ 1/2 50 180 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous Intensity/ Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Green λD[1] Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 520 nm IF=20mA Green 525 nm IF=20mA Spectral Line Half-width Green 35 nm IF=20mA C Capacitance Green 100 pF VF=0V;f=1MHz VF[2] Forward Voltage Green 3.2 4.0 V IF=20mA IR Reverse Current Green 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Green Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG5362 REV NO: V.1 DATE: JUN/09/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 2 OF 5 ERP: 1203004735 Green APT1608VGC/A SPEC NO: DSAG5362 REV NO: V.1 DATE: JUN/09/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 3 OF 5 ERP: 1203004735 APT1608VGC/A Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAG5362 REV NO: V.1 DATE: JUN/09/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 4 OF 5 ERP: 1203004735 PACKING & LABEL SPECIFICATIONS APT1608VGC/A SPEC NO: DSAG5362 REV NO: V.1 DATE: JUN/09/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 5 OF 5 ERP: 1203004735