Power Inductors <SMD Type: CDPH Series> Type: CDPH45D13F ◆ Product Description ・4.9×4.7mm Max.(L×W),1.4mm Max. Height. ・Inductance range: 1.0～33μH. ・Rated current range:0.55～2.50A. ・Custom design is available. ◆ Feature ・Magnetically shielded construction. ・Ideally used as DC-DC Converter inductors in Mobile phone, PDA, HDD etc. ・RoHS Compliance. ◆ Dimensions (mm) 1.4 Max. 1.8 3.5 4.9 Max 4.7 Max * Dimensions without tolerance are approx. ◆ Connection (Bottom View) 5.7 3.1 ◆ Land Pattern (mm) 2.2 Please refer to the sales offices on our website for a representative near you www.sumida.com 1/2 Power Inductors <SMD Type: CDPH Series> Type: CDPH45D13F ◆ Specification Stamp Inductance (μH) 100kHz/1V D.C.R.(mΩ) Max. (Typ.) ( 20℃) Saturation Current (A) (Typ.) ※1 Temperature rise current (A) (Typ.) ※2 CDPH45D13FNP-1R0NC A 1.0±30% 51(41) 4.00(5.00) 2.50(2.80) CDPH45D13FNP-1R2NC B 1.2±30% 61(49) 3.40(4.25) 2.29(2.60) CDPH45D13FNP-1R8NC C 1.8±30% 71(57) 3.12(3.90) 1.96(2.24) CDPH45D13FNP-2R4MC D 2.4±20% 85(68) 2.54(3.18) 1.92(2.20) CDPH45D13FNP-3R3MC E 3.3±20% 96(77) 2.32(2.90) 1.86(2.10) CDPH45D13FNP-3R9MC F 3.9±20% 107(86) 2.08(2.60) 1.70(1.92) CDPH45D13FNP-4R7MC G 4.7±20% 120(96) 2.04(2.55) 1.62(1.84) CDPH45D13FNP-5R6MC J 5.6±20% 133(106) 1.66(2.08) 1.60(1.82) CDPH45D13FNP-6R8MC K 6.8±20% 175(140) 1.63(2.04) 1.32(1.50) CDPH45D13FNP-100MC L 10.0±20% 277(222) 1.30(1.62) 1.04(1.19) CDPH45D13FNP-120MC M 12.0±20% 298(238) 1.26(1.57) 0.98(1.12) CDPH45D13FNP-150MC P 15.0±20% 405(324) 1.15(1.44) 0.85(0.97) CDPH45D13FNP-180MC Q 18.0±20% 428(342) 1.00(1.25) 0.78(0.89) CDPH45D13FNP-220MC R 22.0±20% 678(542) 0.85(1.07) 0.66(0.75) CDPH45D13FNP-330MC T 33.0±20% 920(736) 0.74(0.92) 0.55(0.63) Part Name ※ ※ Description of part name CDPH45D13FNP-1R2N□ B Box C Carrier Tape ※1.Saturation current: The DC current at which the inductance decreases to 70% of its nominal value . (Ta＝20℃) ※2.Temperature rise current: The DC current at which the temperature rise is △t＝40℃.(Ta＝20℃) ※ This spec is not the final revision, and some parts may be changed before production. Please refer to the sales offices on our website for a representative near you www.sumida.com 2/2