DC / DC Converter Series CT-13D1-1W SERIES 3000Vdc Isolation Single Output 1 Watt Dc-Dc Converter FEATURES: ●4 PIN SIP and 8 PIN DIL Package. ●High insulation 3000Vdc. ●High Efficiency up to 85%. ●Unregulated Output Types. ●Internal SMD Construction ●No External Component Required ●Operating Temperature:-40℃ TO +85℃ ●Industry Standard Pinout Specifications typical at TA=25°C, nominal input voltage and rated output current unless otherwise specified Output Output Package Efficiency Voltage Current Style Part Number Vdc mA %TYP “X” CT-XXS03NX 3.3 303 70 1/2/3/4 CT-XXS05NX 5 200 70 1/2/3/4 CT-XXS09NX 9 112 75 1/2/3/4 CT-XXS12NX 12 84 78 1/2/3/4 CT-XXS15NX 15 67 80 2/3/4 CT-XXS24NX 24 42 82 2/3/4 Note:1.”XX” Is Input Voltage:03=3.3Vdc,05=05Vdc,09=09Vdc,12=12Vdc,15=15Vdc,24=24Vdc. 3. The input voltage increases, there will be an increase in efficiency. 2. Over 24Vdc input voltage, using the 3 package Input Specifications Parameters Conditions Voltage Tolerance Filter Min Typ Vo, Io Nom Max Units ±10 % Max Units ±5 % Capacitor Output Specifications Parameters Conditions 100% full load Voltage Tolerance Short Circuit Protection Min Typ Short Term 1 Sec Line Regulation For 1.0% OF Vin Load Regulation 3.3V & 5V (10% To 100% F.L) Load Regulation 9V.12V.15V&24V (10% To 100% F.L) 10 % Ripple & Noise BW=DC To 20MHz(Package 1) 150 mVp-p Ripple & Noise BW=DC To 20MHz (Package 2/3/4) 100 mVp-p Transient response setting time 350 Conditions Min Isolation Resistance 500Vdc 1000 Switching Frequency Full load,nominal input Humidity Cooling Case material Weight % us Max Units MΩ 100 Non Condensing KHz +85 ℃ 95 % Free air Convection DAP MIL-HDBK-217F@25℃ MTBF Typ -40 Operating Temperature % 15 50% load step change General Specifications Parameters 1.2 Package 1/2/3/4 3500000 Hours 1.1/1.5/1.9/1.9 g Dimensions Package 1 11.50x6.00x7.5 mm Dimensions Package 2 11.50x6.00x10.0 mm Dimensions Package 3 11.50x7.50x10.0 mm Dimensions Package 4 12.7x10.16x7.50 mm  CET Technology, LLC • www.cettechnology.com, E: [email protected] • T: 603.894.6100 • F: 603.894.6161 DC / DC Converter Series CT-13D1-1W SERIES 3000Vdc Isolation Single Output 1 Watt Dc-Dc Converter Tolerance Envelope Graph 100 120% GND 3.3V:Cin 5V :Cin 9V :Cin 12V:Cin 15V:Cin 24V:Cin Single Cout 4.7uF,25V 3.3V :Cout 22uF,16V 4.7uF,25V 5V :Cout 10uF,25V 4.7uF,25V 9V :Cout 4.7uF,25V 2.2uF,25V 12V:Cout 2.2uF,25V 15V:Cout 1uF,50V 1uF,5 0V 24V:Cout 1uF,50V 1uF,50V 110% 120% Part Number 13D1 - 03 S 05 N 2 A B C D E F A:Series B:Input Voltage C:Single Output D:Output Voltage E:Unregulated(N) F:Packge +Vout Cin 90% Output Current(%) Recommended Test Circuit Vin 100% 100 80% 85 Ambient Temperature(℃) 70% -40 10% 0 80% 70% 60% Nature Convection 90% 40% 25 100% 50% 50 110% 20% 75 30% Output Voltage(%) OutPut Power(%) Temperature Derating Graph -Vout Markings and dimensions printed face 3 2 4 0.25±0.05 4 3 0.25±0.05 1.94 10.00 0.50 1.94 4.00 4.00 7.50 2 BOTTOM VIEW 7.62 7.62 0.50±0.05 1.25 TOP VIEW 2 3 0.50±0.05 12.70 7.62 1 4 BOTTOM VIEW 0.25±0.05 7.62 1.94 4 10.16 1 7.50 2.54 printed face 11.50 TOP VIEW 7.62 2.54 3 1 TOP VIEW 1.25 2 BOTTOM VIEW 1.25 TOP VIEW 0.50 1 6.00 1 printed face 11.50 6.00 11.50 4 O0.50±0.05 BOTTOM VIEW 7 5 4.00 4.00 7.50 10.00 0.50 5.08 2.54 0.50±0.05 0.50±0.05 Unit:mm Unless otherwise specified, all tolerances are ±0.25 PIN Connection PIN 4IN 8IN 1 -Vin -Vin 2 +Vin 3 -Vout 4 +Vout +Vin 5 7 +Vout -Vout  CET Technology, LLC • www.cettechnology.com, E: [email protected] • T: 603.894.6100 • F: 603.894.6161