AZ672 MINIATURE POWER RELAY FEATURES • Compact size for dense PCB layouts • High power contacts (10A) for use in consumer appliances, HVAC, TV • Withstands surges of up to 10,000 volts • Epoxy sealed version available • UL file E44211; CSA file LR74120 • TÜV file BL980934205001 GENERAL DATA CONTACTS Arrangement SPST – NO Ratings Non - inductive load: Max. switched power: 240 W or 2000 VA Max. switched current: 8A (DC), 10A (AC) Max. switched voltage: 150* VDC or 250 VAC *Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Rated Load UL, CUR, TÜV UL, CUR 10 A at 125 VAC resistive 8 A at 250 VAC resistive 8 A at 30 VDC resistive TV5 1/8 HP, 125 VAC / 277 VAC Material Silver tin indium oxide Resistance < 100 milliohms initially (6 V, 1A voltage drop method) COIL Power Life Expectancy Mechanical Electrical 2 x 106 1 x 105 at 10 A 120 VAC Res. Operate Time (typical) 10 ms at nominal coil voltage Release Time (typical) 6 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 1000 Vrms contact to contact (at sea level for 1 min.) 4000 Vrms contact to coil 10,000 V surge contact to coil Insulation Resistance 1000 megohms min. at 20°C, 500 VDC, 50% RH Dropout 5% of nominal coil voltage Ambient Temperature Operating Storage -40°C (-40°F) to 70°C (158°F) -40°C (-40°F) to 105°C (221°F) Vibration 1.5mm DA at 10–55 Hz Shock 10 g Enclosure Plastic Terminals PC, tinned Max. Solder Temp. 250°C (482°F) Max. Solder Time 5 seconds At Pickup Voltage (typical) 300 mW Max. Continuous Dissipation 1 W at 20°C (68°F) ambient Temperature Rise 45°C at nominal coil voltage Max. Solvent Temp. 80°C Max. 105°C Max. Immersion Time 30 seconds Weight 12 grams (approx.) Temperature NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 4. Specifications subject to change without notice. 6/1/01W AZ672 RELAY ORDERING DATA COIL SPECIFICATIONS — STANDARD RELAY ORDER NUMBER Nominal Coil VDC 3 Must Operate VDC 2.25 Max. Continuous VDC 3.9 Coil Resistance ±10% 17 Unsealed AZ672–1A–3D Sealed AZ672–1A–3DE 5 3.75 6 4.5 6.5 47.2 AZ672–1A–5D AZ672–1A–5DE 7.8 67.9 AZ672–1A–6D 9 6.75 11.7 153 AZ672–1A–9D AZ672–1A–6DE AZ672–1A–9DE 12 9 15.6 272 AZ672–1A–12D AZ672–1A–12DE 24 18 31.2 1,090 AZ672–1A–24D AZ672–1A–24DE 48 36 62.4 4,350 AZ672–1A–48D AZ672–1A–48DE MECHANICAL DATA .945 [24.0] PC BOARD LAYOUT .413 [10.5] VIEWED TOWARDS TERMINALS .787 [20.0] 4X ø.051 [ø1.3] .984 [25.0] .138 [3.5] .295 [7.5] .157 [4.0] 2X ø.020 [ø0.5] .083 [2.1] .295 [7.5] 2X .012 [0.3] .787 [20.0] .138 [3.5] .083 [2.1] 2X .031 [0.8] WIRING DIAGRAM VIEWED TOWARDS TERMINALS 5 4 .295 [7.5] 1 3 6/1/01W