EGF1A thru EGF1D Vishay General Semiconductor Surface Mount Glass Passivated Ultrafast Rectifier FEATURES • Cavity-free glass-passivated junction ® • Ideal for automated placement • Ultrafast reverse recovery time • Low switching losses, high efficiency • High forward surge capability d* e t n e Pat • Meets environmental standard MIL-S-19500 • Meets MSL level 1, per J-STD-020, LF maximum peak of 250 °C * Glass-plastic encapsulation technique is covered by patent No. 3,996,602, brazed-lead assembly by Patent No. 3,930,306 and lead forming by Patent No. 5,151,846 DO-214BA (GF1) • Solder dip 260 °C, 40 s • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC PRIMARY CHARACTERISTICS IF(AV) 1.0 A VRRM 50 V to 200 V IFSM 30 A trr 50 ns VF 1.0 V TJ max. 175 °C TYPICAL APPLICATIONS For use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer, automotive and telecommunication. MECHANICAL DATA Case: DO-214BA, molded epoxy over glass body Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Device marking code EGF1A EGF1B EGF1C EGF1D UNIT EA EB EC ED Maximum repetitive peak reverse voltage VRRM 50 100 150 200 V Maximum RMS voltage VRMS 35 70 105 140 V Maximum DC blocking voltage VDC 50 100 150 200 V Maximum average forward rectified current at TL = 125 °C IF(AV) 1.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 30 A TJ, TSTG - 65 to + 175 °C Operating junction and storage temperature range Document Number: 88579 Revision: 27-Aug-07 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 EGF1A thru EGF1D Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage (1) 1.0 A SYMBOL EGF1A EGF1B EGF1C EGF1D UNIT VF 1.0 V TA = 25 °C TA = 125 °C IR 5.0 50 µA Typical reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 50 ns Typical junction capacitance 4.0 V, 1 MHz CJ 15 pF Maximum DC reverse current at rated DC blocking voltage (1) Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL EGF1A EGF1B RθJA RθJL Typical thermal resistance (1) EGF1C EGF1D UNIT 85 30 °C/W Note: (1) Thermal resistance from junction to ambient and from junction to lead, P.C.B. mounted on 0.2 x 0.2" (5.0 x 5.0 mm) copper pad areas ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE EGF1D-E3/67A 0.104 67A 1500 7" diameter plastic tape and reel EGF1D-E3/5CA 0.104 5CA 6500 13" diameter plastic tape and reel EGF1DHE3/67A (1) 0.104 67A 1500 7" diameter plastic tape and reel EGF1DHE3/5CA (1) 0.104 5CA 6500 13" diameter plastic tape and reel Note: (1) Automotive grade AEC Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise specified) 30 Peak Forward Surge Current (A) Average Forward Rectified Current (A) 1.0 0.5 Resistive or Inductive Load P.C.B. Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) Copper Pad Areas 0 TJ = TJ Max. 8.3 ms Single Half Sine-Wave 25 20 15 10 5 0 0 25 50 75 100 125 150 175 1 10 100 Lead Temperature (°C) Number of Cycles at 60 Hz Figure 1. Maximum Forward Current Derating Curve Figure 2. Maximum Non-Repetitive Peak Forward Surge Current www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88579 Revision: 27-Aug-07 EGF1A thru EGF1D Vishay General Semiconductor 70 10 TJ = 150 °C TJ = 25 °C 1 0.1 Pulse Width = 300 µs 1 % Duty Cycle 0.01 0.2 50 40 30 20 10 0 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0.1 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Figure 5. Typical Junction Capacitance 100 Transient Thermal Impedance (°C/W) 1000 Instantaneous Reverse Leakage Current (µA) TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 60 Junction Capacitance (pF) Instantaneous Forward Current (A) 100 100 TJ = 150 °C 10 TJ = 100 °C 1 0.1 TJ = 25 °C 0.01 0 20 40 60 80 10 1 0.1 0.01 100 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Figure 4. Typical Reverse Leakage Characteristics Figure 6. Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-214BA (GF1) Cathode Band Mounting Pad Layout 0.066 (1.68) 0.040 (1.02) 0.076 MAX. (1.93 MAX.) 0.066 MIN. (1.68 MIN.) 0.187 (4.75) 0.167 (4.24) 0.015 (0.38) 0.0065 (0.17) 0.060 MIN. (1.52 MIN.) 0.108 (2.74) 0.098 (2.49) 0.118 (3.00) 0.100 (2.54) 0.060 (1.52) 0.030 (0.76) Document Number: 88579 Revision: 27-Aug-07 0.006 (0.152) TYP. 0.220 (5.58) REF 0.114 (2.90) 0.094 (2.39) 0.226 (5.74) 0.196 (4.98) For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1