AZ770 SPDT SUBMINIATURE POWER RELAY FEATURES • • • • • • 5 kV dielectric strength, 10 kV surge 8mm creepage and clearance Proof tracking index (PTI/CTI) 250 5 Amp switching (1 Form A: 20A inrush) Epoxy sealed version available Reinforced insulation, EN 60730-1 (VDE 0631, part 1), 1 Form A: EN 60335-1 (VDE 0700, part 1) • UL, CUR file E44211 • VDE file 40006815 CONTACTS GENERAL DATA Arrangement SPST (1 Form A) SPDT (1 Form C) Ratings Resistive load: Max. switched power: 150 W or 1250 VA Max. switched current: 5A Max. switched voltage: 150 VDC* or 380 VAC Life Expectancy Mechanical Electrical Minimum operations 1 x 106 1 x 105 at 5 A 250 VAC Res. Operate Time (typical) 8 ms at nominal coil voltage Release Time (typical) 4 ms at nominal coil voltage (with no coil suppression) * Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Rated Load UL, CUR Form A (N.O.) 5 A at 250 VAC, Res., 100k cycles 5 A at 30 VDC, Res., 100k cycles 1/8 HP, 125 / 250 VAC, 100k cycles 3 A at 250 VAC, cos phi 0.4, 100k cycles C300 Pilot Duty, 125 / 250 VAC, 100k cycles TV-2, 120 VAC Form C 3 A at 250 VAC, Res., 100k cycles 3 A at 30 VDC, Res., 100k cycles VDE 5 A at 250 VAC, Res., 100k cycles at 85°C Material Silver nickel, gold plating available Resistance < 100 milliohms initially COIL Power Dielectric Strength 5000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts Surge Voltage Coil to contact 10,000V (at 1.2x50 µs) Insulation Resistance 1000 megohms min. at 20°C 500 VDC 50% RH Insulation (according to DIN VDE 0110, IEC 60664-1) C250 Overvoltage category: III Pollution degree: 3 Nominal voltage: 250 VAC Dropout Greater than 5% of nominal coil voltage Ambient Temperature Operating Storage At nominal coil voltage -40°C (-40°F) to 85°C (185°F) -40°C (-40°F) to 105°C (221°F) Vibration 0.062" (1.5 mm) DA at 10–50 Hz Shock 10 g operating, 100 g damage Enclosure P.B.T. polyester Terminals Tinned copper alloy, P. C. At Pickup Voltage (typical) 253 mW standard coil 113 mW sensitive coil Max. Solder Temp. 270°C (518°F) Max. Continuous Dissipation 1.25 W at 20°C (68°F) ambient Max. Solder Time 5 seconds Temperature Rise (at nominal voltage) 41°C (74°F) standard coil 22°C (40°F) sensitive coil Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 4.6 grams Packing unit in pcs 100 per plastic tray / 1000 per carton box Temperature Max. 130°C (266°F) NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2005-08-04 AZ770 RELAY ORDERING DATA STANDARD RELAYS – TYPE 1 FOOTPRINT COIL SPECIFICATIONS Nominal Coil VDC 3 ORDER NUMBER* Must Operate VDC 2.25 Max. Continuous VDC 3.9 Coil Resistance Ohm ± 10% 20 Form A (SPST) Form C (SPDT) AZ770–1A–3D AZ770–1C–3D 5 3.75 6.5 55 AZ770–1A–5D AZ770–1C–5D 6 4.5 7.8 80 AZ770–1A–6D AZ770–1C–6D 9 6.75 11.7 180 AZ770–1A–9D AZ770–1C–9D 12 9.0 15.6 320 AZ770–1A–12D AZ770–1C–12D 18 13.5 23.4 720 AZ770–1A–18D AZ770–1C–18D 24 18.0 31.2 1,280 AZ770–1A–24D AZ770–1C–24D 48 36.0 62.4 5,120 ±15% AZ770–1A–48D AZ770–1C–48D SENSITIVE RELAYS – TYPE 1 FOOTPRINT COIL SPECIFICATIONS Nominal Coil VDC 3 ORDER NUMBER* Must Operate VDC 2.25 Max. Continuous VDC 5.1 Coil Resistance Ohm ± 10% 45 5 3.75 8.5 125 AZ770–1A–5DS 6 4.5 10.2 180 AZ770–1A–6DS AZ770–1A–9DS Form A (SPST) AZ770–1A–3DS 9 6.75 15.3 400 12 9.0 20.4 720 AZ770–1A–12DS 18 13.5 30.6 1,600 AZ770–1A–18DS 24 48 18.0 36.0 40.8 81.6 2,800 11,520 ±15% AZ770–1A–24DS AZ770–1A–48DS * Add suffix “E” for epoxy sealed version. Add suffix “K” for Type 2 footprint. Add suffix “G” for gold plated contacts. MECHANICAL DATA PC BOARD LAYOUT .703 Max [17.85] .407 Max [10.35] 5 x ø .05 [ø 1.3] .494 Max [12.55] .157 [4] ø .02 [ø 0.5] .016 [0.4] 2 x .012 [0.3] .25 [6.35] .30 [7.6] * .016 [0.4] *Not used on Form A version WIRING DIAGRAMS 3 1 2 3 x .012 [0.3] Type 2 Viewed toward terminals .494 Max [12.55] ø .02 [0.5] * Type 1 .03 [0.8] .1 [2.54] .06 [1.5] .407 Max [10.35] .157 [4] .30 [7.6] .157 [4.0] Type 1 .703 Max [17.85] .50 [12.7] 5 x ø .05 [ø 1.3] .60 [15.24] 4 5 2 4 5 * * Type 1 .03 [0.8] 3 1 Type 2 Viewed toward terminals *Not used on Form A version Type 2 Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2005-08-04