FDS3570 80V N-Channel PowerTrenchTM MOSFET General Description Features This N-Channel Logic Level MOSFET has been designed specifically to improve the overall efficiency of DC/DC converters using either synchronous or conventional switching PWM controllers. These MOSFETs feature faster switching and lower gate charge than other MOSFETs with comparable R DS(on) specifications resulting in DC/DC power supply designs with higher overall efficiency. D D 9 A, 80 V. RDS(ON) = 0.019 Ω @ VGS = 10 V RDS(ON) = 0.022 Ω @ VGS = 6 V. Fast switching speed. High performance trench technology for extremely low RDS(ON). High power and current handling capability. D D SO-8 S S S 4 6 3 7 2 8 1 G Absolute Maximum Ratings Symbol 5 TA = 25°C unless otherwise noted Parameter Ratings Units VDSS Drain-Source Voltage 80 V VGSS Gate-Source Voltage ±20 V ID Drain Current 9 A - Continuous (Note 1a) - Pulsed PD Power Dissipation for Single Operation 50 (Note 1a) 2.5 (Note 1b) 1.2 (Note 1c) TJ, Tstg Operating and Storage Junction Temperature Range W 1 -55 to +150 °C Thermal Characteristics RθJA Thermal Resistance, Junction-to-Ambient (Note 1a) 50 °C/W RθJC Thermal Resistance, Junction-to-Case (Note 1) 25 °C/W Package Marking and Ordering Information Device Marking Device Reel Size Tape Width Quantity FDS3570 FDS3570 13’’ 12mm 2500 units 1999 Fairchild Semiconductor Corporation FDS3570 Rev. B FDS3570 May 1999 PRELIMINARY Symbol Parameter TA = 25°C unless otherwise noted Test Conditions Min Typ Max Units Off Characteristics BVDSS Drain-Source Breakdown Voltage ∆BVDSS ∆TJ IDSS Breakdown Voltage Temperature Coefficient Zero Gate Voltage Drain Current IGSSF Gate-Body Leakage Current Forward Gate-Body Leakage Current Reverse IGSSR On Characteristics VGS = 0 V, ID = 250 µA ID = 250 µA, Referenced to 25°C 80 V mV/°C 77 VDS = 64 V, VGS = 0 V 1 VGS = 20 V, VDS = 0 V 100 µA nA VGS = -20 V, VDS = 0 V -100 nA (Note 2) VGS(th) Gate Threshold Voltage VDS = VGS, ID = 250 µA ∆VGS(th) ∆TJ RDS(on) Gate Threshold Voltage Temperature Coefficient Static Drain-Source On-Resistance ID = 250 µA, Referenced to 25°C -7 0.015 0.027 0.016 ID(on) On-State Drain Current VGS = 10 V, ID = 9 A VGS = 10 V, ID = 9 A, TJ = 125°C VGS = 6 V, ID = 8.4 A VGS = 10 V, VDS = 5 V gFS Forward Transconductance VDS = 5 V, ID = 7.6 A 2 2.4 4 V mV/°C 0.019 0.038 0.022 25 Ω A 40 S 2750 pF Dynamic Characteristics VDS = 25 V, VGS = 0 V, f = 1.0 MHz Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance Switching Characteristics 280 pF 140 pF (Note 2) td(on) Turn-On Delay Time tr Turn-On Rise Time VDD = 40 V, ID = 1 A, VGS = 10 V, RGEN = 6 Ω td(off) Turn-Off Delay Time 60 95 ns tf Turn-Off Fall Time 24 38 ns Qg Total Gate Charge 54 76 nC Qgs Gate-Source Charge Qgd Gate-Drain Charge VDS = 40 V, ID = 9 A, VGS = 10 V 20 32 ns 12 24 ns 9.6 nC 14 nC Drain-Source Diode Characteristics and Maximum Ratings IS Maximum Continuous Drain-Source Diode Forward Current VSD Drain-Source Diode Forward Voltage VGS = 0 V, IS = 2.1 A (Note 2) 0.72 2.1 A 1.2 V Notes: 1. RθJA is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is defined as the solder mounting surface of the drain pins. RθJC is guaranteed by design while RθCA is determined by the user's board design. a) 50° C/W when mounted on a 1 in2 pad of 2 oz. copper. b) 105° C/W when mounted on a 0.04 in2 pad of 2 oz. copper. c) 125° C/W when mounted on a minimum pad. Scale 1 : 1 on letter size paper 2. Pulse Test: Pulse Width ≤ 300 µs, Duty Cycle ≤ 2.0% FDS3570 Rev. B FDS3570 Electrical Characteristics FDS3570 Typical Characteristics 2 50 RDS(ON), NORMALIZED DRAIN-SOURCE ON-RESISTANCE ID, DRAIN CURRENT (A) VGS = 10V 4.5V 40 30 4.0V 20 10 3.5V 0 1.8 1.6 VGS = 4.0V 1.4 4.5V 5.0V 1.2 6.0V 7.0V 0.8 0 1 2 3 0 10 VDS, DRAIN-SOURCE VOLTAGE (V) 20 30 40 50 ID, DRAIN CURRENT (A) Figure 2. On-Resistance Variation with Drain Current and Gate Voltage. Figure 1. On-Region Characteristics. 0.06 2 ID = 9A VGS = 10V 1.8 ID = 4.5A RDS(ON), ON-RESISTANCE (OHM) RDS(ON), NORMALIZED DRAIN-SOURCE ON-RESISTANCE 10V 1 1.6 1.4 1.2 1 0.8 0.6 0.05 o TA = 125 C 0.04 0.03 0.02 o TA = 25 C 0.01 0 0.4 0 -50 -25 0 25 50 75 100 125 2 150 4 6 8 10 VGS, GATE TO SOURCE VOLTAGE (V) o TJ, JUNCTION TEMPERATURE ( C) Figure 3. On-Resistance Variation with Temperature. Figure 4. On-Resistance Variation with Gate-to-Source Voltage. 60 100 IS, REVERSE DRAIN CURRENT (A) VDS = 5V ID, DRAIN CURRENT (A) 50 40 30 20 o 10 o o TA = -55 C VGS = 0V 10 o TA = 125 C 1 o 25 C o 0.1 -55 C 0.01 0.001 0.0001 0 2 3 4 5 VGS, GATE TO SOURCE VOLTAGE (V) Figure 5. Transfer Characteristics. 6 0 0.2 0.4 0.6 0.8 1 1.2 1.4 VSD, BODY DIODE FORWARD VOLTAGE (V) Figure 6. Body Diode Forward Voltage Variation with Source Current and Temperature. FDS3570 Rev. B (continued) 4000 10 VDS = 10V ID = 9A f = 1MHz VGS = 0 V 3500 20V 8 40V CAPACITANCE (pF) VGS, GATE-SOURCE VOLTAGE (V) FDS3570 Typical Characteristics 6 4 3000 CISS 2500 2000 1500 1000 2 500 COSS CRSS 0 0 0 10 20 30 40 50 0 60 10 20 30 40 60 Figure 8. Capacitance Characteristics. Figure 7. Gate-Charge Characteristics. 100 50 RDS(ON) LIMIT SINGLE PULSE 100µs o 100ms VGS = 10V SINGLE PULSE 0.1 o TA = 25 C 1s 10s DC 1 RθJA = 125 C/W 40 1ms 10ms 10 POWER (W) ID, DRAIN CURRENT (A) 50 VDS, DRAIN TO SOURCE VOLTAGE (V) Qg, GATE CHARGE (nC) o RθJA = 125 C/W 30 20 10 o TA = 25 C 0.01 0 0.1 1 10 100 0.001 0.01 VDS, DRAIN-SOURCE VOLTAGE (V) r(t), NORM ALIZED EFFECTIVE Figure 9. Maximum Safe Operating Area. TR ANSI ENT TH ER MAL RESISTANC E 0.1 1 10 100 1000 SINGLE PULSE TIME (SEC) Figure 10. Single Pulse Maximum Power Dissipation. 1 0.5 0.2 0.1 0.05 D = 0.5 R θJ A (t) = r(t) * R θJ A R θJ A= 125°C /W 0.2 0.1 0 .0 5 P(p k ) 0.0 2 0.02 t1 0.01 0.01 S i n g le P ul s e t2 TJ - TA = P * RθJA ( t) 0.0 05 D u t y C y c l e, D = t 1 /t2 0.0 02 0.0 01 0.0001 0.0 01 0.01 0.1 1 10 100 300 t 1, TI M E (s e c ) Figure 11. Transient Thermal Response Curve. Thermal characterization performed using the conditions described in Note 1c. Transient themal response will change depending on the circuit board design. FDS3570 Rev. B SO-8 Tape and Reel Data and Package Dimensions SOIC(8lds) Packaging Configuration: Figure 1.0 Packaging Description: EL ECT ROST AT IC SEN SIT IVE DEVICES DO NO T SHI P OR STO RE N EAR ST RO NG EL ECT ROST AT IC EL ECT RO M AGN ETI C, M AG NET IC O R R ADIO ACT IVE FI ELD S TNR D ATE PT NUMB ER PEEL STREN GTH MIN ___ __ ____ __ ___gms MAX ___ ___ ___ ___ _ gms Antistatic Cover Tape ESD Label SOIC-8 parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. The cover tape is a multilayer film (Heat Activated Adhesive in nature) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. These reeled parts in standard option are shipped with 2,500 units per 13" or 330cm diameter reel. The reels are dark blue in color and is made of polystyrene plastic (antistatic coated). Other option comes in 500 units per 7" or 177cm diameter reel. This and some other options are further described in the Packaging Information table. These full reels are individually barcode labeled and placed inside a standard intermediate box (illustrated in figure 1.0) made of recyclable corrugated brown paper. One box contains two reels maximum. And these boxes are placed inside a barcode labeled shipping box which comes in different sizes depending on the number of parts shipped. Static Dissipative Embossed Carrier Tape F63TNR Label Customized Label F852 NDS 9959 F852 NDS 9959 F852 NDS 9959 F852 NDS 9959 F852 NDS 9959 Pin 1 SOIC (8lds) Packaging Information Packaging Option Packaging type Qty per Reel/Tube/Bag Standard (no flow code) TNR 2,500 L86Z F011 D84Z Rail/Tube TNR TNR 95 4,000 500 13" Dia - 13" Dia 7" Dia 343x64x343 530x130x83 343x64x343 184x187x47 Max qty per Box 5,000 30,000 8,000 1,000 Weight per unit (gm) 0.0774 0.0774 0.0774 0.0774 Weight per Reel (kg) 0.6060 - 0.9696 0.1182 Reel Size Box Dimension (mm) SOIC-8 Unit Orientation Note/Comments 343mm x 342mm x 64mm Standard Intermediate box ESD Label F63TNR Label sample F63TNLabel F63TN Label LOT: CBVK741B019 QTY: 2500 FSID: FDS9953A SPEC: D/C1: D9842 D/C2: QTY1: QTY2: SPEC REV: CPN: N/F: F ESD Label (F63TNR)3 SOIC(8lds) Tape Leader and Trailer Configuration: Figure 2.0 Carrier Tape Cover Tape Components Trailer Tape 640mm minimum or 80 empty pockets Leader Tape 1680mm minimum or 210 empty pockets July 1999, Rev. B SO-8 Tape and Reel Data and Package Dimensions, continued SOIC(8lds) Embossed Carrier Tape Configuration: Figure 3.0 P0 D0 T E1 F K0 Wc W E2 B0 Tc A0 D1 P1 User Direction of Feed Dimensions are in millimeter Pkg type A0 B0 SOIC(8lds) (12mm) 6.50 +/-0.10 5.30 +/-0.10 W 12.0 +/-0.3 D0 D1 E1 E2 1.55 +/-0.05 1.60 +/-0.10 1.75 +/-0.10 F 10.25 min 5.50 +/-0.05 P1 P0 8.0 +/-0.1 4.0 +/-0.1 K0 2.1 +/-0.10 Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C). T Wc 0.450 +/0.150 9.2 +/-0.3 0.06 +/-0.02 0.5mm maximum 20 deg maximum Typical component cavity center line B0 Tc 0.5mm maximum 20 deg maximum component rotation Typical component center line Sketch A (Side or Front Sectional View) A0 Component Rotation Sketch C (Top View) Component lateral movement Sketch B (Top View) SOIC(8lds) Reel Configuration: Figure 4.0 Component Rotation W1 Measured at Hub Dim A Max Dim A max See detail AA Dim N 7" Diameter Option B Min Dim C See detail AA W3 13" Diameter Option Dim D min W2 max Measured at Hub DETAIL AA Dimensions are in inches and millimeters Tape Size Reel Option Dim A Dim B 0.059 1.5 512 +0.020/-0.008 13 +0.5/-0.2 0.795 20.2 2.165 55 0.488 +0.078/-0.000 12.4 +2/0 0.724 18.4 0.469 – 0.606 11.9 – 15.4 0.059 1.5 512 +0.020/-0.008 13 +0.5/-0.2 0.795 20.2 7.00 178 0.488 +0.078/-0.000 12.4 +2/0 0.724 18.4 0.469 – 0.606 11.9 – 15.4 12mm 7" Dia 7.00 177.8 12mm 13" Dia 13.00 330 1998 Fairchild Semiconductor Corporation Dim C Dim D Dim N Dim W1 Dim W2 Dim W3 (LSL-USL) July 1999, Rev. B SO-8 Tape and Reel Data and Package Dimensions, continued SOIC-8 (FS PKG Code S1) 1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram): 0.0774 9 September 1998, Rev. A TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ISOPLANAR™ MICROWIRE™ POP™ PowerTrench™ QFET™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 ACEx™ CoolFET™ CROSSVOLT™ E2CMOSTM FACT™ FACT Quiet Series™ FAST® FASTr™ GTO™ HiSeC™ TinyLogic™ UHC™ VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.