ATC 600F Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors Features: • Lowest ESR in Class • Highest Working Voltage in class – 250V • Standard EIA Size: 0805 • Laser Marking (Optional) • High Self Resonance Frequencies Applications: • Cellular Base Stations • Wireless Communications • Broadband Wireless Services • Satellite Communications • WiMAX (802.16) Circuit Applications: ATC 600 SERIES OVERVIEW • Filter Networks • High Q Frequency Sources • Matching Networks • Tuning, Coupling, Bypass and DC Blocking ATC Series 600 600 600 ATC Case Size L S F Electrical Specifications Mechanical Specifications Capacitance: 0.1 to 240 pF Terminations: Tolerances: See Cap Value Chart Working Voltage (WVDC): 250 V Quality Factor (Q): > 2000 @ 1 MHz Operating Temperature Range: Temperature coefficient of Capacitance (TCC): Insulation Resistance: -55°C to +125°C (no derating of working voltage) 0 ± 30 ppm/°C, -55°C to +125°C 105 M⍀ min. at +25°C at rated WVDC 104 M⍀ min. at +125°C at rated WVDC Dielectric Withstanding Voltage (DWV): 2.5 x WVDC for 5 seconds Aging: None Piezo Effects: None EIA Case Size 0402 0603 0805 T = Tin Plated over Nickel Barrier* (Standard) TN = Tin Plated over NonMagnetic Barrier* W = Tin/Lead Solder Plated over Nickel Barrier Solderability: Solder coverage > 90% of end termination Terminal Strength: 4 lbs. Typ., 2 lbs. min. Environmental Specifications Life Test: Thermal Shock: 2000 hours, +125°C at 2X WVDC 5 cycles, -55°C to +125°C Moisture Resistance: 240 hours, 85% Relative Humidity at +85°C Military Approval DSCC Drawing Number 05001 * ATC 600 Series Capacitors are designed and manufactured to meet and exceed the requirements of EIA-198, MIL-PRF-55681 and MIL-PRF-123. ISO 9001 REGISTERED COMPANY ATC # 001-956 Rev. M; 12/09 ATC 600F Series Ultra-Low ESR, High Q NPO RF & Microwave Capacitors Capacitance Values* Value (pF) Cap Code Marking Tolerances Value (pF) Cap Code Marking Tolerances Value (pF) Cap Code Marking Tolerances 0.1 0R1 A9 A, B 3.3 3R3 N0 A, B, C, D 30 300 M1 F, G, J, K, M 0.2 0R2 H9 A, B 3.6 3R6 P0 A, B, C, D 33 330 N1 F, G, J, K, M 0.3 0R3 M9 A, B, C 3.9 3R9 Q0 A, B, C, D 36 360 P1 F, G, J, K, M 0.4 0R4 d9 A, B, C 4.3 4R3 R0 A, B, C, D 39 390 Q1 F, G, J, K, M 0.5 0R5 f9 A, B, C 4.7 4R7 S0 A, B, C, D 43 430 R1 F, G, J, K, M 0.6 0R6 m9 A, B, C 5.1 5R1 T0 A, B, C, D 47 470 S1 F, G, J, K, M 0.7 0R7 n9 A, B, C 5.6 5R6 U0 A, B, C, D 51 510 T1 F, G, J, K, M 0.8 0R8 t9 A, B, C 6.2 6R2 V0 A, B, C, D 56 560 U1 F, G, J, K, M 0.9 0R9 y9 A, B, C 6.8 6R8 W0 B, C, J, K 62 620 V1 F, G, J, K, M 1.0 1R0 A0 A, B, C, D 7.5 7R5 X0 B, C, J, K 68 680 W1 F, G, J, K, M 1.1 1R1 B0 A, B, C, D 8.2 8R2 Y0 B, C, J, K 75 750 X1 F, G, J, K, M 1.2 1R2 C0 A, B, C, D 9.1 9R1 Z0 B, C, J, K 82 820 Y1 F, G, J, K, M 1.3 1R3 D0 A, B, C, D 10 100 A1 F, G, J, K, M 91 910 Z1 F, G, J, K, M 1.5 1R5 E0 A, B, C, D 11 110 B1 F, G, J, K, M 100 101 A2 F, G, J, K, M 1.6 1R6 F0 A, B, C, D 12 120 C1 F, G, J, K, M 110 111 B2 F, G, J, K, M 1.8 1R8 G0 A, B, C, D 15 150 E1 F, G, J, K, M 120 121 C2 F, G, J, K, M 2.0 2R0 H0 A, B, C, D 18 180 G1 F, G, J, K, M 150 151 E2 F, G, J, K, M 2.2 2R2 J0 A, B, C, D 20 200 H1 F, G, J, K, M 180 181 G2 F, G, J, K, M 2.4 2R4 K0 A, B, C, D 22 220 J1 F, G, J, K, M 200 201 H2 F, G, J, K, M 2.7 2R7 L0 A, B, C, D 24 240 K1 F, G, J, K, M 220 221 J2 F, G, J, K, M 3.0 3R0 M0 A, B, C, D 27 270 L1 F, G, J, K, M 240 241 K2 F, G, J, K, M *Non-standard values and custom tolerances are available upon request. ATC Part Number Code 600 ATC Series F 10 0 J T 250 X T Packaging T - Tape and Reel (Standard)* TV - Vertical Tape and Reel (Optional) Case Size (0805) Capacitance Code: First 2 significant digits for capacitance. R=Decimal Point Indicates number of zeros following digits of capacitance in picofarads except for decimal values. Capacitance Tolerance Laser Marked ** WVDC Termination Code T = Tin Plated over Nickel Barrier (Standard) RoHS Compliant TN = Tin Plated over Non-Magnetic Barrier W = Tin/Lead Solder Plated over Nickel Barrier TOLERANCE CODE TABLE Code A B C D F G K J M Tol. ±0.05pF ±0.1 pF ±0.25 pF ±0.5 pF ±1% ±2% ±5% ±10% ±20% *4,000 pieces on 7'' reel and 500 pieces on prototype reel. Consult ATC for other options. The above part number refers to a 600F Series (case size F) 10 pF capacitor, J tolerance (±5%), 250 WVDC, with T termination (Tin Plated over Nickel Barrier, RoHS Compliant), Laser Marking and Tape and Reel packaging. ** Marking is optional. ATC accepts orders for our parts using designations with or without the “ATC” prefix. Both methods of defining the part number are equivalent, i.e., part numbers referenced with the “ATC” prefix are interchangeable to parts referenced without the “ATC” prefix. Customers are free to use either in specifying or procuring parts from American Technical Ceramics. A M E R I C A N T E C H N I C A L ATC North America +1-631-622-4700 • [email protected] 2 w w For additional information and catalogs contact your ATC representative or call direct at (+1-631) 622-4700. Consult factory for 500 piece reels for prototyping. Consult factory for additional performance data. C E R A M I C S ATC Europe +46 8 6800410 • [email protected] w . a t c e r a m i c s ATC Asia 86-755-2396-8759 • [email protected] . c o m ATC 600F Series Ultra-Low ESR, High Q NPO RF & Microwave Capacitors 600 F ESR vs Frequency ESR (Ohms) 1.000 1.0 pF 3.3 pF 3.9 pF 10 pF 15 pF 47 pF 120 pF 180 pF 0.100 (Typical) 0.010 100 1000 10000 Frequency (MHz) 600 F Resonant Frequency Data Frequency (GHz) 100 10 Fpr Fsr 1 ( Typical) 0 0.1 1.0 10.0 100.0 1000.0 Capacitance (pF) ATC 600F Series Data Sheet Test Condition Description Capacitors horizontally mounted on 23.3-mil thick Rogers RO4350® softboard, 52-mil wide, 1/2 oz. Cu traces. FSR = lowest frequency at which S11 response, referenced at capacitor edge, crosses real axis on Smith Chart. FPR = lowest frequency at which there is a notch in S21 magnitude response. A M E R I C A N T E C H N I C A L ATC North America +1-631-622-4700 • [email protected] w w C E R A M I C S ATC Europe +46 8 6800410 • [email protected] w . a t c e r a m i c s ATC Asia 86-755-2396-8759 • [email protected] . c o m 3 ATC 600F Series Ultra-Low ESR, High Q NPO RF & Microwave Capacitors Outline Dimensions Y L: .079 ± .008 (2.01 ± 0.20) W: .049 ± .008 (1.24 ± 0.20) F (0805) W T: .051 max. (1.30 max.) Y: .020 ± 0.01 (0.51 ± 0.25) T L Inches (mm) Suggested Mounting Pad Dimensions T W L L Case Sizes L, S and F A W 1 T A1 Horizontal Electrode Orientation Vertical Electrode Orientation B A B C Case Size A Min. B Min. C Min. D Min. 0402 (1005) .0275 (0.70) .0354 (0.90) .0157 (0.40) .0866 (2.20) 0603 (1608) .0393 (1.00) .0433 (1.10) .0236 (0.60) .110 (2.80) 0805 (2012) .0590 (1.50) .0512 (1.30) .0236 (0.60) .1259 (3.20) Inches (mm) D Design Kits Kit # Kit 32T Kit 33T Kit 34T Kit 35T Item # DK0032T Each Kit contains a selection of standard capacitor values for circuit prototyping. Cap. Values (pF) Tol. (pF) 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1, 1.2, 1.5 ±0.1 1.6, 1.8, 2.0 ±0.25 1.0, 1.2, 1.5, 1.8, 2.0, 2.2, 2.4, 2.7, 3.0, 3.3 ±0.1 3.9, 4.7, 5.6, 6.8, 8.2 ±0.25 10 ±5% 10 to 100 10, 12, 15, 18, 20, 22, 24, 27, 30, 33, 39, 47, 56, 68, 82, 100 ±5% $90.00 100 to 240 100, 120, 150, 180, 200, 220, 240 ±5% $50.00 Cap. Value Range (pF) Description 600F Series Ultra-low ESR, High Q Microwave Capacitors 0.1 to 2.0 16 different values, 15 pcs. min. per valuE DK0033T 600F Series Ultra-low ESR, High Q Microwave Capacitors 1.0 to 10 16 different values, 15 pcs. min. per value DK0034T 600F Series Ultra-low ESR, High Q Microwave Capacitors 16 different values, 15 pcs. min. per value DK0035T 600F Series Ultra-low ESR, High Q Microwave Capacitors Price $90.00 $90.00 7 different values, 15 pcs. min. per value For Online Kit Orders, Catalog & Application Notes, Visit: www.atceramics.com Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale(ATC document #001-992 Rev. B 12/05). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atceramics.com/productfinder/default.asp. Click on the link for Terms and Conditions of Sale. ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product without prior notice. © 2002 American Technical Ceramics Corp. All Rights Reserved. A M E R I C A N T E C H N I C A L ATC North America +1-631-622-4700 • [email protected] w w ATC 001-956 Rev. M; 12/09 C E R A M I C S ATC Europe +46 8 6800410 • [email protected] w . a t c e r a m i c s ATC Asia 86-755-2396-8759• [email protected] . c o m 4