CIT A11ASQ6VDC1.5R Switching capacity up to 30a Datasheet

A1
RoHS Compliant
22.8 x 15.3 x 25.8 mm
Features
tures
•
•
•
•
Switching capacity up to 30A
Small size and light weight
PCB pin and quick connect mounting available
Suitable for automobile and lamp accessories
Contact Data*
Contact Arrangement
Contact Rating
1A = SPST N.O.
Contact Resistance
< 50 milliohms initial
1C = SPDT
Contact Material
AgSnO2
1A : 25A, 30A @ 14VDC
Maximum Switching Power
350W
1C : 20A @ 14VDC
Maximum Switching Voltage
75VDC
Maximum Switching Current
30A
Coil Data*
Coil Voltage
VDC
Rated
Coil Resistance
Ω +/- 10%
Max
1.2W
1.5W
Pick Up Voltage Release Voltage
VDC (max)
VDC (min)
70% of rated
voltage
Coil Power
W
Operate Time
ms
Release Time
ms
1.20 or 1.50
10
7
10% of rated
voltage
6
7.8
30
24
4.20
.6
12
15.6
120
96
8.40
1.2
24
31.2
480
384
18.00
2.4
48
62.4
1920
1536
33.60
4.8
General Data*
Electrical Life @ rated load
100K cycles, average
Mechanical Life
10M cycles, average
Insulation Resistance
100M Ω min. @ 500VDC initial
Dielectric Strength, Coil to Contact
2500V rms min. @ sea level initial
Contact to Contact
1500V rms min. @ sea level initial
Shock Resistance
100m/s2 for 11 ms
Vibration Resistance
1.27mm double amplitude 10~40Hz
Terminal (Copper Alloy) Strength
8N (Quick Connect), 4N (PCB pins)
Operating Temperature
-40oC to +85oC
Storage Temperature
-40oC to +155oC
Solderability
260oC for 5 s
Weight
18.5g
* Values can change due to the switching frequency, desired reliability levels, environmental conditions and in-rush load levels. It is recommended to test actual load conditions for the
application. It is the user’s responsibility to determine the performance suitability for their specific application. The use of any coil voltage less than the rated coil voltage may compromise
the operation of the relay.
www.citrelay.com
phone - 763.535.2339
Dimensions shown in mm. Dimensions are shown for reference purposes only.
fax - 763.535.2194
page 1
Specifications and availability subject to change without notice.
A1
Ordering Information
1. Series
A1
1A
S
Q
12VDC
1.2
A1
2. Contact Arrangement
1A = SPST N.O.
1C = SPDT
3. Sealing Option
S = Sealed
4. Termination
P = PCB Pins
Q = Quick Connect
5. Coil Voltage
6VDC
12VDC
24VDC
48VDC
6. Coil Power
1.2 = 1.2W
1.5 = 1.5W
7. Coil Suppression
Blank = Standard
D = Diode (1N4005)
R = Resistor (680 ohms)
** Consult factory if other values are needed
Dimensions
Units = mm
23.45
[.92]
15.65
[.62]
23.45
[.92]
25.80
[1.02]
15.65
[.62]
25.80
[1.02]
2.80
[.11]
3.20
[.13]
11.70
[.46]
3X 4.75
[.187]
0.80 TYP
[.032]
2X 6.35
[.250]
2.45 TYP
[.10] 7.00
[.28]
Quick Connect
page 2
www.citrelay.com
8.00
[.31]
4.50
[.18]
0.80 TYP
[.03]
4.50
[.18]
PC Pin
phone - 763.535.2339
Dimensions shown in mm. Dimensions are shown for reference purposes only.
fax - 763.535.2194
Specifications and availability subject to change without notice.
A1
Schematics & PC Layout
Bottom Views
85
85
87
87
87A
30
86
86
1A
1C
85
85
87
87A
87A
30
87
30
86
86
1C with Resistor
Ø2.75
[.11]
30
7.00
[.28]
1C with Diode
8.00
[.31]
4.50
[.18]
4.50
[.18]
www.citrelay.com
phone - 763.535.2339
Dimensions shown in mm. Dimensions are shown for reference purposes only.
fax - 763.535.2194
page 3
Specifications and availability subject to change without notice.
Similar pages