AGP15-400 thru AGP15-800 Vishay General Semiconductor Glass Passivated Junction Plastic Controlled Avalanche Rectifier FEATURES • Superectifier application SUPERECTIFIER® structure for high reliability • Cavity-free glass-passivated junction • Controlled avalanche characteristics • Low forward voltage drop • Low leakage current, IR less than 0.1 μA • High forward surge capability • Meets environmental standard MIL-S-19500 DO-204AC (DO-15) • Solder dip 275 °C max. 10 s, per JESD 22-B106 • AEC-Q101 qualified • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC TYPICAL APPLICATIONS For use in general purpose rectification of power supplies, inverters, converters and freewheeling diodes application. PRIMARY CHARACTERISTICS IF(AV) 1.5 A VRRM 400 V to 800 V PRM 500 W IFSM 50 A IR 5.0 μA VF 1.1 V TJ max. 175 °C MECHANICAL DATA Case: DO-204AC, molded epoxy over glass body Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Base P/NHE3 - RoHS compliant, AEC-Q101 qualified Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL AGP15-400 AGP15-600 AGP15-800 UNIT Maximum recurrent peak reverse voltage VRRM 400 600 800 V Maximum RMS voltage VRMS 280 420 560 V Maximum DC blocking voltage VDC 400 600 800 V Maximum peak power dissipation in the avalanche region 20 μs pulse PRM 500 W IAV 1.5 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 50 A Maximum full load reverse current, full cycle average 0.375" (9.5 mm) lead length at TA = 55 °C IR(AV) 100 μA TJ, TSTG - 65 to + 175 °C Maximum average forward rectified current 0.375" (9.5 mm) lead length at TA = 55 °C Operating junction and storage temperature range Document Number: 88535 Revision: 15-Mar-11 For technical questions within your region, please contact one of the following: www.vishay.com [email protected], [email protected], [email protected] 1 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 AGP15-400 thru AGP15-800 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL AGP15-400 AGP15-600 AGP15-800 UNIT Minimum avalanche breakdown voltage 100 μA VBR 450 675 880 V Maximum avalanche breakdown voltage 100 μA VBR 750 1000 1200 V Maximum instantaneous forward voltage 1.5 A Maximum reverse current at rated DC blocking voltage VF 1.1 V IR 5.0 μA Typical reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 2.0 μs Typical junction capacitance 4.0 V, 1 MHz CJ 15 pF THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance RJA AGP15-400 AGP15-600 (1) AGP15-800 25 UNIT °C/W Note (1) Thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length, P.C.B. mounted ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE AGP15-400-E3/54 0.425 54 4000 13" diameter paper tape and reel AGP15-400-E3/73 0.425 73 2000 Ammo pack packaging AGP15-400HE3/54 (1) 0.425 54 4000 13" diameter paper tape and reel AGP15-400HE3/73 (1) 0.425 73 2000 Ammo pack packaging Note AEC-Q101 qualified (1) RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 10 Instantaneous Forward Current (A) Average Forward Rectified Current (A) 1.50 1.25 1.00 0.75 0.50 Single Phase Half Wave 60 Hz Resistive or Inductive Load 0.375" (9.5 mm) Lead Length 0.25 0 25 50 75 100 125 150 175 1 0.1 TJ = 25 °C Pulse Width = 300 μs 1 % Duty Cycle 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 Ambient Temperature (°C) Instantaneous Forward Voltage (V) Fig. 1 - Maximum Forward Current Derating Curve Fig. 2 - Typical Instantaneous Forward Characteristics www.vishay.com 2 For technical questions within your region, please contact one of the following: Document Number: 88535 [email protected], [email protected], [email protected] Revision: 15-Mar-11 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 AGP15-400 thru AGP15-800 Vishay General Semiconductor 1000 Peak Reverse Avalanche Power (W) Peak Forward Surge Current (A) 100 10 TA = 55 °C 8.3 ms Single Half Sine-Wave 1 TJ = 25 °C 100 10 1 10 100 10 100 1000 10 000 Number of Cycles at 60 Hz Pulse Duration (μs) Fig. 3 - Maximum Non-repetitive Peak Forward Surge Current Fig. 5 - Typical Reverse Leakage Characteristics Instantaneous Reverse Leakage Current (μA) 10 TJ = 125 °C 1 TJ = 75 °C 0.1 TJ = 25 °C 0.01 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig. 4 - Maximum Non-repetitive Reverse Avalanche Power Dissipation PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-204AC (DO-15) 0.034 (0.86) 0.028 (0.71) DIA. 1.0 (25.4) MIN. 0.300 (7.6) 0.230 (5.8) 0.140 (3.6) 0.104 (2.6) DIA. 1.0 (25.4) MIN. Document Number: 88535 Revision: 15-Mar-11 For technical questions within your region, please contact one of the following: www.vishay.com [email protected], [email protected], [email protected] 3 This datasheet is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1