DOMINANT Opto Technologies Innovating Illumination TM DATA SHEET: Power DomiLED AlInGaP : DWx-MJS Power DomiLED With its significant power in terms brightness, viewing angle and variety of application possibilities, Power DomiLED truly is a standout performer! Ideal for automotive interior lighting as well as home, office and industrial applications, it is also a proven performer in electronic signs and signals. Features: > > > > > > > High brightness surface mount LED using thin film technology. 120° viewing angle. Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to IR reflow soldering. Environmental friendly; RoHS compliance. Passed Corrosion Resistant Test. Appx. 4.1 Applications: > Automotive: Interior applications, eg: switches, telematics, climate control system, dashboard, etc. Exterior applications, eg: signal lighting, Center High Mounted Stop Light (CHMSL) > Signage: full colour display video notice board, signage, special effect lighting. > Industrial: white goods (eg: Oven, microwave, etc.), light bar, illuminated advertising. > Lighting: architecture lighting, general lighting, garden light, channel light. © 2005 DomiLED is a trademark of DOMINANT Opto Technologies. All rights reserved. Product specifications are subject to change without notice. 1 03/07/2017 V13.0 DOMINANT TM AlInGaP : DWx-MJS Opto Technologies Innovating Illumination Optical Characteristics at Tj=25˚C Part Ordering Number Color Luminous Intensity @ IF = 50mA IV (mcd) Appx. 1.1 Min. Typ. Max. DWS-MJS-WX1-1 Super Red, 632nm 120 1125.0 1800.0 2240.0 DWR-MJS-W2X-1 Red, 625nm 120 1400.0 2240.0 2850.0 DWA-MJS-W2X-1 Amber, 615nm 120 1400.0 2240.0 2850.0 DWO-MJS-W2X-1 Orange, 605nm 120 1400.0 2240.0 2850.0 DWO-MJS-XY2-1 Orange, 605nm 120 1800.0 2850.0 4500.0 DWY-MJS-W2X-1 Yellow, 587nm 120 1400.0 2240.0 2850.0 DWY-MJS-WX1-1 Yellow, 587nm 120 1125.0 1800.0 2240.0 Viewing Angle˚ Electrical Characteristics at Tj=25˚C Part Number DWx-MJS Vf @ If = 50mA Appx. 3.1 Min. (V) 2.00 Vr @ Ir = 10uA Typ. (V) Max. (V) 2.20 2.65 Min. (V) 12 Absolute Maximum Ratings Maximum Value Unit DC forward current 70 mA Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.1) 100 mA Reverse voltage 12 V ESD threshold (HBM) 2000 V LED junction temperature 125 ˚C Operating temperature -40 … +100 ˚C Storage temperature -40 … +100 ˚C 200 mW 300 K/W 130 K/W Power dissipation (at room temperature) Thermal resistance - Junction / ambient, Rth JA - Junction / solder point, Rth JS (Mounting on FR4 PCB, pad size >= 16 mm2 per pad) 2 03/07/2017 V13.0 DOMINANT TM AlInGaP : DWx-MJS Opto Technologies Innovating Illumination Wavelength Grouping at Tj= 25˚C Color Group Wavelength distribution (nm) Appx. 2.2 DWS; Super Red Full 625 - 640 DWR; Red Full 620 - 630 DWA; Amber Full 610 - 621 W 610 - 615 X 615 - 621 Full 600 - 612 W 600 - 603 X 603 - 606 Y 606 - 609 Z 609 - 612 Full 582 - 594 W 582 - 585 X 585 - 588 Y 588 - 591 Z 591 - 594 DWO; Orange DWY; Yellow 3 03/07/2017 V13.0 DOMINANT TM AlInGaP : DWx-MJS Opto Technologies Innovating Illumination Luminous Intensity Group at Tj=25˚C Luminous Intensity Appx. 1.1 IV (mcd) Brightness Group W1 1125.0...1400.0 W2 1400.0...1800.0 X1 1800.0...2240.0 X2 2240.0...2850.0 Y1 2850.0...3550.0 Y2 3550.0...4500.0 Vf Bining (Optional) at Tj= 25˚C Vf @ If = 50mA Forward Voltage (V) Appx. 3.1 V5A 2.05 ... 2.20 V5B 2.20 ... 2.35 V5C 2.35 ... 2.50 V5D 2.50 ... 2.65 Please consult sales and marketing for special part number to incorporate Vf binning. 4 03/07/2017 V13.0 DOMINANT TM AlInGaP : DWx-MJS Opto Technologies Innovating Illumination Relative Luminous Intensity Vs Forward Current Relative Luminous IntensityCurrent Vs Forward Current Relative Luminous Intensity Vs Forward IV/IVIV(50mA) f(I );Tj Tj ==25°C f(IF); Tj = 25°C /IV(50mA) = = If(I );F(50mA) = 25°C V/I FV Forward Current Vs Forward Voltage Relative Vs Intensity Forward Current RelativeIntensity Luminous Vs Forward Current 1.4Luminous 70 IV/IV(50mA) =IVf(I/IFV);(50mA) Tj = 25°C = f(IF); Tj = 25°C 1.4 1.4 70 Luminous Intensity Vs Forward Current 1.2 Relative1.2 60 IV/IV(50mA) = f(IF); Tj = 25°C 1.2 1.2 1.4 60 70 1.0 1.0 50 0.4 0.6 0.2 0.2 0.4 0.0 0.0 0.2 0.0 90 0 0 0 90 80 0.4 0.2 0.2 0.0 0 20 1030 2040 3050 4060 5070 10 0.0 (mA) 10 0Forward 20Forward 40 IFIF30 50 10 30Current 20Forward 40 60 50 70 Current IF (mA) Current (mA) Maximum Current Vs Temperature Maximum Current VsForward Temperature Forward Current IF (mA) Current IF (mA) IF =50f (T) 60 IF = f (T)Vs 10 20 Current 30 40 Temperature 70 Maximum Maximum Current Vs Temperature Maximum Current Vs Temperature 90 I = f (T) I = f (T) I =f(T) F F ForwardFCurrent IF (mA) 90 80 Maximum Current Vs Temperature IF = f (T) Ts 80 70 40 50 30 30 40 20 20 30 10 1.0 1.8 1.0 0.9 Ts Ts 30 20 10 0 1.91.8 0 1.9 1.8 70 1.8 0 10 70 1.8 0 40 30 20 10 10 20 0 100 100 10 10 10 0.1 0.1 Relative Luminous Intensity Irel Irel Relative Luminous Intensity Forward Current IF (mA) Forward Current IF (mA) Allowable Forward Current IF( mA Allowable Forward Current IF( )mA ) 100 Relative Luminous RelativeRelative Luminous Intensity IrelIntensity Luminous Intensity Irel Irel F Forward Current IF (mA) Forward Current IF (mA) Forward Current IF (mA) Ts Allowable Forward Current IF( mA ) Allowable Forward Current IF( )mA ) Allowable Forward Current IF( mA Allowable Forward Current IF( mA ) 60 60 50 40 2.01.9 2.32.2 2.3 (V)2.32.2 Forward (V)Voltage Forward Voltage 2.0 2.1 2.2 1.9 Forward 2.0VFVoltage 2.1 VV F F (V) 2.12.0 2.22.1 2.3 Forward Voltage VSpectral Forward Voltage VF (V) Relative Emission Relative Spectral Emission F (V) Relative Irel = f(λ); IF = 50mA Tj = 25°C; IFSpectral =T50mA j = 25°C; 1.9 Irel = f(λ);2.0 2.1 2.2Emission 2.3 Emission Relative Spectral Emission 1.0 RelativeI Spectral f(λ); TF j=T=V50mA 25°C; IF= =50mA 50mA Irel = f(λ); Tj = = I25°C; I = f(λ); = 25°C; I rel (V) Forward Voltage rel j F F 1.0 0.9 Amber Amber Relative Spectral EmissionSuper Red Super Red 0.9 0.8 Irel = f(λ); Tj = 25°C; IF = 50mA 0.9 0.8 Amber Amber 1.0 Super Red Super Red Orange Orange 0.8 0.8 0.7 0.7 70 70 60 60 0.9 Orange 80 Amber Orange Ta Ta Super Red 0.7 0.7 0.6 0.6 T 60 60 s 0.8 50 50 70 Ta Ta 0.6 0.6 0.5 Orange 0.5 50 50 0.7 Red Red Yellow Yellow 40 40 60 0.5 0.5 0.4 Ta 0.4 Red Red Yellow Yellow 0.6 40 40 30 30 50 0.4 0.4 0.3 0.3 0.5 30 30 Red Yellow 20 20 40 0.3 0.3 0.2 0.2 0.4 20 20 Temperature Ta = Ambient Temperature Ta = Ambient 0.2 10 0.2 10 30 0.1 0.1 0.3 = Solder Point Temperature Ts = Solder PointTsTemperature Ta = Ambient Ta = Ambient Temperature 10 10 Temperature 0.1 0.1 0 0.0 0.0 200 T = Solder Point Solder Point Temperature T =Temperature 350500 400550 450600 500650 550700 600750 650800 700850 750 800 850 350 400 450 0 s10 20 030 s 1040 2050 3060 4070 5080 6090 70 100 80 110 90 1000.2110 0 0.0 0 0.0 Ambient Temperature 10 0 Ta =10 Temperature T(°C) λ (nm) λWavelength (nm) 20 0 30 10Temperature 40 2050 3060 40 70 5080 6090T(°C) 350 400 450 550 700 800 350 500 400Wavelength 450 600 500 650 550 600 750 650 700 850 750 800 850 701008011090 1000.1110 Ts = Solder Point Temperature Temperature T(°C) Temperature T(°C) Wavelength λ (nm) Wavelength λ (nm) Allowable Forward Current Vs Duty Ratio 0.0 Allowable Forward Current Vs Duty Ratio Temperature T(°C) 0 Wavelength λ (nm) ( T = 25°C; t ≤ 10μs ) 110 ( T = 25°C; t ≤ 10μs ) j p j p 350 400 450 500 550 600 650 700 750 800 850 0 10 20 30 40 50 60 70 80 90 100 Allowable Forward Current Vs Duty Ratio Allowable Forward Current Vs Duty Ratio 1000 1000 Temperature T(°C) (T ) tp ≤ 10μs ) Wavelength λ (nm) j = 25°C; tp (≤T10μs j = 25°C; Allowable 1000 1000 Forward Current Vs Duty Ratio Radiation Pattern Allowable Forward Current Vs Duty Ratio ( T( jT==25°C; t ≤ 10μs) 25°C; tp ≤p 10μs ) j 30° 20° 10° 0° 1000 80 70 90 Forward Current I (mA) 0.6 0.4 Forward Current IF (mA) 0.6 0.8 0.4 0.8 0.6 50 60 40 Forward Current IF IF Forward Current 0.8 1.0 0.6 1.0 0.8 Relative Luminous Intensity Irel 1.0 1.2 0.8 Forward Forward Current IF Current Forward Current IF IF Relative Luminous Intensity Irel Irel Relative Luminous Intensity Relative Luminous Intensity Irel Relative Luminous Intensity Relative Luminous Intensity Irel Irel Relative Luminous Intensity Irel 1.4 Forward CurrentVoltage Vs Forward Voltage Forward Current Vs Forward ); T = 25°C I25°C IF = f(VFI);F T=j =f(V F =Ff(VF);j Tj = 25°C Forward Current Vs Forward Forward Current Voltage Vs Forward Voltage 70 IF = f(VF); Tj =IF25°C = f(VF); Tj = 25°C 70 Forward Current Vs Forward Voltage 60 IF = f(VF); Tj = 25°C 60 50 1.0 40° 100 100 10 10 0.1 1 1 0.1 1 Duty Ratio,1%Duty 10 Ratio, % 10 10 10 100 100 100 100 Duty Ratio, % Duty Ratio, % 0.1 1 10 50° 0.6 60° 0.4 70° 0.2 80° 90° 100 0.8 0 Duty Duty Ratio, Ratio, %% 5 03/07/2017 V13.0 DOMINANT TM AlInGaP : DWx-MJS Opto Technologies Innovating Illumination Relative Luminous Intensity Vs Junction Temperature Relative Luminous Intensity Vs Junction Temperature Relative Luminous Intensity Vs Junction Temperature (25°C) ==f(Tf(T IV); = I50mA IVI/IV /IVV(25°C) = 50mA j); = f(T ); I = 50mA IV /IV (25°C) j jF V 2.0 2.0 0.4 0.4 1.8 1.8 0.3 0.3 0.2 0.2 0.1 0.1 0.0 0.0 -0.1 -0.1 -0.2 -0.2 YellowYellow Orange OrangeAmber Amber Red Red Super Super Red Red -0.3 -0.3 -0.4 -0.4 -0.5 -0.5 -50 -30 -50 -10 10 30 50 70 90 -30 -10 10 30 50 70 110 90 Junction Temperature T j(°C) Junction Temperature T (°C) Junction Temperature T (°C) j 130 110 1.6 1.4 1.4 1.2 1.2 1.0 1.0 0.8 0.8 0.6 0.6 0.4 0.4 0.2 0.2 0.0 0.0 -50 -30 -50 Red Red Super Super Red Red Orange Orange YellowYellow AmberAmber -10 10 30 50 70 90 -30 -10 10 30 50 70 110 90 Junction Temperature T j(°C) T (°C) Junction Temperature 130 110 130 Junction Temperature jTj(°C) j Chromaticity Coordinate Shift Vs Junction Temperature ∆Cx, ∆Cy = f(Tj); IF = 50mA 10.0 0.030 8.0 0.025 0.020 6.0 0.015 4.0 0.010 Red 0.0 Amber Super Red -2.0 -4.0 -50 -30 -10 10 ∆Cy -0.010 -0.020 Yellow -8.0 0.000 -0.005 -0.015 Orange -6.0 ∆Cx 0.005 ∆Cx, ∆Cy 2.0 -10.0 1.6 130 Relative Wavelength VsJunction Junction Temperature Relative Wavelength Vs Temperature = λdom-- λdom λdom (25°C) = f(Tj);=IF f(Tj); = 50mA ∆λdom∆λ=dom λdom (25°C) IF =50mA Relative Wavelength ∆λdom (nm) ∆λdom(nm) Wavelength Relative Intensity Luminous Relative Relative Luminous Intensity IrelIrel 0.5 Relative Luminous Intensity Irel 0.5 Relative Forward Voltage ∆VF (V) RelativeForward Forward Voltage ∆V∆V F (V) (V) Voltage Relative F Relative Forward Voltage Junction Temperature Relative Forward Voltage VsVs Junction Temperature Relative Forward Voltage Vs Junction Temperature V V (25°C) = f(T IFf(T =);50mA ∆V∆V = V (25°C) = f(T I =50mA F= F-- V FV j); ∆V = V (25°C) = ); I = 50mA F F F j F F F F j F -0.025 30 50 70 90 110 130 -0.030 -50 -30 -10 10 30 50 70 90 110 130 Junction Temperature T j(°C) Junction Temperature TTj(°C) Junction Temperature (°C) j 6 03/07/2017 V13.0 AlInGaP : DWx-MJS Opto Technologies Innovating Illumination TM DOMINANT AlInGaP : DWx-MJS Opto Technologies DomiLED • AllnGaP : DWx-MJS Package Outlines Innovating Illumination TM Power DomiLED • AllnGaP : DWx-MJS Package Outlines Note :: Primary Primary thermal thermal path path is is through throughAnode Anode lead lead of of LED LED package. package. Note Material Material Material Lead-frame Cu Alloy With Ag Plating Material Package Lead-frame High Temperature Resistant Plastic, PPA Cu Alloy With Ag Plating Encapsulant Package High TemperatureEpoxy Resistant Plastic, PPA Soldering Leads Encapsulant Sn-Sn Plating Epoxy Soldering Leads Sn-Sn Plating 7 7 04/11/2016 V12.0 03/07/2017 V13.0 DOMINANT DOMINANT Opto Technologies TM TM AlInGaP : DWx-MJS AlInGaP : DWx-MKG Opto Technologies Innovating Illumination Innovating Illumination Recommended Solder Pad Recommended Solder Pad 8 8 03/07/2017 V13.0 31/10/2016 V1.0 DOMINANT DOMINANT DOMINANT Opto Technologies TM TM TM AlInGaP::DWx-MJS DWx-MJS AlInGaP AlInGaP : DWx-MJS OptoTechnologies Technologies Opto Innovating Illumination Innovating Illumination Innovating Illumination Tapingand andorientation orientation Taping Taping and orientation • • Reelscome come inquantity quantityofof2000 2000units. units. • •Reels Reels come ininquantity of 2000 units. • Reel diameter is 180 mm. • Reel Reeldiameter diameterisis180 180mm. mm. 9 9 9 04/11/2016 V12.0 03/07/2017 V13.0 04/11/2016 V12.0 DOMINANT TM AlInGaP : DWx-MJS Opto Technologies Innovating Illumination Packaging Specification 10 03/07/2017 V13.0 DOMINANT TM AlInGaP : DWx-MJS Opto Technologies Innovating Illumination Packaging Specification Moisture sensitivity level Barcode label DOMINANT Opto Technologies (L) Lot No : lotno ML TEMP 2 260˚C RoHS Compliant (P) Part No : partno (C) Cust No : partno (Q) Quantity : quantity (G) Grouping : group (D) D/C : date code Made in Malaysia (S) S/N : serial no Reel Moisture absorbent material + Moisture indicator Label The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Weight Weight(gram) (gram) Average 1pc Power DomiLED 1 completed bag (2000pcs) 0.034 0.034 240 ± 10 190 10 Cardboard Box DOMINANT TM For Power DomiLED Cardboard Box Size Dimensions (mm) Empty Box Weight (kg) Reel / Box Super Small 325 x 225 x 190 0.38 9 reels MAX Small 325 x 225 x 280 0.54 15 reels MAX Medium 570 x 440 x 230 1.46 60 reels MAX Large 570 x 440 x 460 1.92 120 reels MAX 11 03/07/2017 V13.0 DOMINANT TM AlInGaP : DWx-MJS Opto Technologies Innovating Illumination Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 217˚C 225 Temperature (˚C) Ramp-up 3˚C/sec max. 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 12 03/07/2017 V13.0 DOMINANT TM AlInGaP : DWx-MJS Opto Technologies Innovating Illumination Appendix 1) Brightness: 1.1 Luminous intensity is measured with an internal reproducibility of ± 8 % and an expanded uncertainty of ± 11 % (according to GUM with a coverage factor of k=3). 1.2 Luminous flux is measured with an internal reproducibility of ± 8 % and an expanded uncertainty of ± 11 % (according to GUM with a coverage factor of k=3). 2) Color: 2.1 Chromaticity coordinate groups are measured with an internal reproducibility of ± 0.005 and an expanded uncertainty of ± 0.01 (accordingly to GUM with a coverage factor of k=3). 2.2 DOMINANT wavelength is measured with an internal reproducibility of ± 0.5nm and an expanded uncertainty of ± 1nm (accordingly to GUM with a coverage factor of k=3). 3) Voltage: 3.1 Forward Voltage, Vf is measured with an internal reproducibility of ± 0.05V and an expanded uncertainty of ± 0.1V (accordingly to GUM with a coverage factor of k=3). 4) Corrosion Robustness: 4.1 Test conditions: 40 °C / 90 % rh / 15 ppm H2S / 336 h. = Stricter than IEC 60068-2-43 (H2S) [25 °C / 75% rh / 10 ppm H2S / 21 days]. 13 03/07/2017 V13.0 DOMINANT TM AlInGaP : DWx-MJS Opto Technologies Innovating Illumination Revision History Page Subjects Date of Modification 2, 5 Update Vf max value Update Graph: Relative Luminous Intensity Vs Forward Current 29 Dec 2011 2 Add new partno: DWO-MJS-XY2-1 07 Sep 2012 1 Update Product Photo 06 Aug 2013 5 Amend Graph : Forward Current Vs Forward Voltage 27 Dec 2013 3 Update Temperature Coefficient of IV in Characteristics 26 Jun 2014 1, 5, 6, 7, 11, 13 Update Features Update Graph Add Notes in Package Outline Update Packaging Specification Add Appendix 04 Nov 2016 4 Typo Error on Vf Binning Naming 03 Jul 2017 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies. 14 03/07/2017 V13.0 DOMINANT TM Opto Technologies AlInGaP : DWx-MJS Innovating Illumination About Us DOMINANT Opto Technologies is a dynamic company that is amongst the world’s leading automotive LED manufacturers. With an extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing and development capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies, a ISO/TS 16949 and ISO 14001 certified company, can be found under http://www.dominant-semi.com. Please contact us for more information: DOMINANT Opto Technologies Sdn. Bhd. Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia Tel: (606) 283 3566 Fax: (606) 283 0566 E-mail: [email protected]