RoHS CLC03 Ceramic Core Laser Cut Chip Inductor 0.031±0.008 (0.80±0.20) 0.063±0.008 (1.60±0.20) 0.031±0.008 (0.80±0.20) Dimensions: Inches (mm) 0.012±0.004 (0.30±0.10) 0.031 (0.80) 0.022 (0.55) Features • • • • • • 0603 EIA Size Available in 2% Tolerance High Self Resonant Frequencies Stable Performance at High Frequencies Suitable for Flow and Reflow Soldering Non-Magnetic core assures excellent thermal stability and batch consistency Electrical Inductance range: 1.0nh to 220nh Tolerance: see table for tolerance options Test Frequency: 1nH to 100nH @ 100MHz 120nH to 220nH @ 25.2MHz Operating Temperature: -40ºC-100ºC IDC: Based on 15ºC temperature rise @ 25ºC Ambient. Test Equipment (L/Q): HP4291B Impedance Analyzer with HP16192 Fixture (SRF): HP8753E Network Analyzer (RDC): HP4338 Millihohm meter Physical Packaging: 3000 pieces per 7 inch reel. Marking: N/A 714-665-1140 Allied Part Number Inductance (nh) Available Tolerances *SeeBelow Q Min. Q Typical @800MHz SRF Typical (MHz) DCR Max. (Ω) IDC Max. (mA) CLC03-1N0_-RC CLC03-1N2_-RC 1.0 1.2 S, B S, B 7 7 47 47 0.05 0.06 500 CLC03-1N5_-RC 1.5 S, B 8 CLC03-1N8_-RC 1.8 S, B 8 47 45 6000 6000 6000 6000 0.07 0.08 500 500 500 CLC03-2N2_-RC 2.2 S, B 8 35 6000 0.09 500 CLC03-2N7_-RC 2.7 S, B 8 35 6000 0.10 500 CLC03-3N3_-RC 3.3 S, B 9 35 5500 0.12 500 CLC03-3N9_-RC 3.9 J, B 9 36 5500 0.15 450 CLC03-4N7_-RC 4.7 J, B 9 36 4800 0.17 450 CLC03-5N6_-RC 5.6 9 0.18 6.8 9 36 36 4600 CLC03-6N8_-RC J, B J, B 3550 0.20 CLC03-8N2_-RC 8.2 10 12 15 J, B J, G J, G J, G 9 10 10 10 36 37 0.28 0.32 37 38 3500 2800 2800 2500 0.35 0.41 430 430 400 400 400 350 18 J, G 10 39 2300 0.45 350 22 J, G 10 40 2000 27 33 J, G J, G 10 10 41 40 2000 1800 0.50 0.55 0.60 300 CLC03-39N_-RC 39 J, G 11 39 1800 0.80 300 CLC03-47N_-RC 47 J, G 11 38 1800 0.95 250 CLC03-56N_-RC 56 J, G 12 35 1800 1.20 250 CLC03-68N_-RC 68 J, G 12 35 1500 1.30 250 CLC03-82N_-RC 82 J, G 12 33 1500 1.50 250 CLC03-R10_-RC 100 J, G 12 30 1300 1.80 200 CLC03-R12_-RC 120 J, G 5 25 1200 3.00 130 CLC03-R15_-RC 150 J, G 5 22 1100 4.50 100 CLC03-R18_-RC 180 J, G 4 20 1000 6.50 80 CLC03-R22_-RC 220 J, G 4 - 900 7.50 70 CLC03-10N_-RC CLC03-12N_-RC CLC03-15N_-RC CLC03-18N_-RC CLC03-22N_-RC CLC03-27N_-RC CLC03-33N_-RC 300 300 * Please complete the part number with your required tolerance, S= ±0.3nH, B= ± 0.2nH, J= ±5%, G= ±2% All specifications subject to change without notice. ALLIED COMPONENTS INTERNATIONAL 11/12/10 www.alliedcomponents.com