BYM13-20 thru BYM13-60, SGL41-20 thru SGL41-60 Vishay General Semiconductor Surface Mount Schottky Barrier Rectifier FEATURES • MELF Schottky rectifier • Ideal for automated placement • Guardring for overvoltage protection • Low power losses, high efficiency • Low forward voltage drop • High surge capability • Meets MSL level 1, per J-STD-020C, LF max peak of 250 °C DO-213AB • Solder Dip 260 °C, 40 seconds • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC MAJOR RATINGS AND CHARACTERISTICS IF(AV) 1.0 A VRRM 20 V to 60 V IFSM 30 A VF 0.50 V, 0.70 V Tj max. 125 °C, 150 °C TYPICAL APPLICATIONS For use in low voltage high frequency inverters, freewheeling, dc-to-dc converters, and polarity protection applications MECHANICAL DATA Case: DO-213AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002B and JESD22-B102D E3 suffix for commercial grade, HE3 suffix for high reliability grade (AEC Q101 qualified) Polarity: Two bands indicate cathode end 1st band denotes device type 2nd band denotes voltage type MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL BYM13-20 BYM13-30 BYM13-40 BYM13-50 BYM13-60 Denotes Schottky devices: 1st band is orange Polarity color bands (2nd band) voltage type SGL41-20 SGL41-30 SGL41-40 SGL41-50 SGL41-60 Gray Red Orange Yellow Green UNIT Maximum repetitive peak reverse voltage VRRM 20 30 40 50 60 V Maximum RMS voltage VRMS 14 21 28 35 42 V Maximum DC blocking voltage VDC 20 30 40 50 60 V Maximum average forward rectified current (see Fig. IF(AV) 1.0 A Peak forward surge current 8.3 ms single half sinewave superimposed on rated load IFSM 30 A Voltage rate of change (rated VR) dv/dt 10000 V/µs Operating junction temperature range Storage temperature range Document Number 88548 03-Nov-06 TJ TSTG - 55 to + 125 - 55 to + 150 - 55 to + 150 °C °C www.vishay.com 1 BYM13-20 thru BYM13-60, SGL41-20 thru SGL41-60 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL Maximum instantaneous at 1.0 A forward voltage (1) BYM13-20 BYM13-30 BYM13-40 BYM13-50 BYM13-60 SGL41-20 SGL41-30 SGL41-40 SGL41-50 SGL41-60 VF 0.50 UNIT 0.70 V 0.5 Maximum reverse current at rated DC blocking voltage (1) TA = 25 °C TA = 100 °C Typical junction capacitance IR at 4.0 V, 1.0 MHz CJ 10 5.0 110 80 mA pF Note: (1) Pulse test: 300 µs pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL BYM13-20 BYM13-30 BYM13-40 BYM13-50 BYM13-60 SGL41-20 SGL41-30 SGL41-40 SGL41-50 SGL41-60 RθJA RθJT Maximum thermal resistance (1) UNIT 75 30 °C/W Note: (1) Thermal resistance junction to terminal, 0.24 x 0.24" (6.0 x 6.0 mm) copper pads to each terminal ORDERING INFORMATION PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 0.114 96 1500 7" Diameter Plastic Tape & Reel SGL41-40-E3/96 GL41-40-E3/97 0.114 97 5000 13" Diameter Plastic Tape & Reel BYM13-40-E3/96 0.114 96 1500 7" Diameter Plastic Tape & Reel BYM13-40-E3/97 0.114 97 5000 13" Diameter Plastic Tape & Reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 30 Average Forward Current (A) Resistive or Inductive Load P.C.B. Mounted on 0.24 x 0.24" (6.0 x 6.0 mm) Copper Land Areas 0.75 SGL41-20 - SGL41-40 0.50 SGL41-50 & SGL41-60 0.25 Peak Forward Surge Current (A) 1.0 At Rated Td 8.3 ms Single Half Sine-Wave 25 20 15 10 5 0 25 0 50 75 100 125 150 Terminal Temperature (°C) Figure 1. Forward Current Derating Curve www.vishay.com 2 175 1 10 100 Number of Cycles at 60 Hz Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Document Number 88548 03-Nov-06 BYM13-20 thru BYM13-60, SGL41-20 thru SGL41-60 Vishay General Semiconductor 400 Tj = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Tj = 125 °C 10 Junction Capacitance (pF) Instantaneous Forward Current (A) 50 Tj = 150 °C Pulse Width = 300 µs 1 % Duty Cycle 1 Tj = 25 °C 0.1 100 SGL41-20 - SGL41-40 SGL41-50 & SGL41-60 SGL41-20 - SGL41-40 SGL41-50 & SGL41-60 0.01 10 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1 0.1 10 40 100 Reverse Voltage (V) Instantaneous Forward Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Figure 5. Typical Junction Capacitance Instantaneous Reverse Current (mA) 100 SGL41-20 - SGL41-40 SGL41-50 & SGL41-60 10 Tj = 125 °C 1 0.1 Tj = 75 °C 0.01 Tj = 25 °C 0.001 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Characteristics PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-213AB SOLDERABLE ENDS 1st BAND D2 0.022 (0.56) 0.018 (0.46) +0 D2 = D1 - 0.008 (0.20) D1= 0.105 0.095 (2.67) (2.41) 0.022 (0.56) 0.018 (0.46) 0.205 (5.2) 0.185(4.7) 1st band denotes type and positive end (cathode) Document Number 88548 03-Nov-06 www.vishay.com 3 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1