DS-310 Flatpack Four-Way Power Divider, 0.2 - 300 MHz Rev. V4 Features • • • • • • FP-5 Insertion Loss: 0.5 dB Typical VSWR: 1.1:1 Typical Miband Impedance: 50 Ohms Nominal Maximum Power Rating or Input Power: 1 Watt Max. Internal Load Dissipation: 50 Watts Max. MIL-STD-883 Screening Available Description A Power Divider is ideally a lossless reciprocal device which can also perform vector summation of two or more signals and thus is sometimes called a power combiner or summer. Pin Configuration Pin No. Function Pin No. Function 1 GND 8 Output 2 None 9 GND 3 None 10 Output 4 Input 11 GND 5 GND 12 Output 6 None 13 GND 7 GND 14 Output Electrical Specifications1: TA = -55°C to +85°C 1 Parameter Test Conditions Frequency Units Min Typ Max Insertion Loss Less Coupling 0.3 - 0.5 MHz 0.5 - 100 MHz 100 - 300 MHz dB dB dB — — — — — — 1.0 0.5 1.0 Isolation — 0.3 - 0.5 MHz 0.5 - 100 MHz 100 - 300 MHz dB dB dB 20 25 15 — — — — — — Amplitude Balance — 0.3 - 0.5 MHz 0.5 - 100 MHz 100 - 300 MHz dB dB dB — — — — — — 0.2 0.2 0.4 Phase Balance — 0.3 - 0.5 MHz 0.5 - 100 MHz 100 - 300 MHz ° ° ° — — — — — — 1.5 4.0 6.0 VSWR All Ports 0.3 - 0.5 MHz 0.5 - 100 MHz 100 - 300 MHz Ratio Ratio Ratio — — — — — — 2.0:1 1.3:1 1.4:1 1. All specifications apply with 50 ohm source and load impedance. This product contains elements protected by United States Patent Number 3,428,920. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. DS-310 Flatpack Four-Way Power Divider, 0.2 - 300 MHz Rev. V4 Typical Performance Curves Insertion Loss VSWR Isolation Ordering Information Part Number Package DS-310 PIN FP-5 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.