SHF–110–01–L–D–RA ESHF–125–01–L–D–SM–LC F-214 EHF–108–01–F–D–SM–LC ESHF–105–01–L–D–SM EHF–125–01–L–D–SM–LC (1,27 mm) .050" SHF, ESHF, EHF, ECF SERIES SHROUDED & EJECTOR IDC HEADER SHF, ESHF Mates with: FFSD, FFTP (SHF) TYPE STRIP EHF Mates with: FFSD*, FFTP NO. PINS PER ROW 1 01 PLATING OPTION TAIL STYLE D SPECIFICATIONS For complete specifications see www.samtec.com?SHF, www.samtec.com?ESHF or www.samtec.com?EHF SHF = Mates with FFSD without Strain Relief Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Plating: Sn or Au over 50µ" (1,27 µm) Ni Operating Temp Range: -55°C to +125°C RoHS Compliant: Yes –RA (Standard sizes) ESHF (1,27) .050 TYP = Mates with FFSD with Strain Relief TYPE STRIP = Right Angle A –SM No. of pins x 02 04 = Locking Clip (Not available with –RA) (Manual placement required) = Throughhole = 10µ" (0,25 µm) Gold on post, Matte Tin on tail A –LC –TH –L 04, 05, 06, 08, 10, 11, 12, 13, 15, 17, 20, 25 OTHER OPTION SHF (1,27) .050 + –TR = Surface Mount (6,35) .250 = Tape & Reel Packaging No. of pins x ESHF (1,27) .050 + (10,16) .400 01 03 –RA –TH Processing: Lead–Free Solderable: Yes SMT Lead Coplanarity: (0,10 mm) .004" max (5,33) .210 (5,46) .215 (1,91) .075 RECOGNITIONS –TH (5,85) .230 (0,41) .016 SQ –SM ALSO AVAILABLE NO. PINS PER ROW 1 01 PLATING OPTION D = (6,50 mm) .256" DIA Polyimide Film Pick & Place Pad (–SM only) (1,27) .050 –RA For complete scope of recognitions see www.samtec.com/quality EHF –K (1,89) .075 –SM TAIL OPTION (1,27) .050 OTHER OPTION (MOQ Required) • Other sizes Contact Samtec. 04, 05, 08, 10, 13, 17, 20, 25 EJECTOR HEADER CAP (Standard sizes) (Locks FFSD cable to EHF header) (8,76) .345 (1,27) .050 ECF Note: Some lengths, styles and options are non-standard, non-returnable. –RA (0,41) .016 SQ 05, 08, 10, 13, 17, 20, 25 *Important Note: EHF will not mate to FFSD with strain relief (-SR option), see ESHF series. –L (1,52) .060 –LC –RA = Locking Clip (–SM only) (Manual placement required) = Right Angle (3,05) .120 –TH –TH (2,72) .107 (1,27) .050 –K = (7,50 mm) .295" DIA Polyimide Film Pick & Place Pad –P = Pick & Place Pad (–SM only) (6,67) (2,29) .263 .090 –LC WWW.SAMTEC.COM (8,51) .335 –SM (7,52) .296 (11,30) .445 (8,26) .325 –“XX” = Polarized Position (–RA not available) = Surface Mount 01 –SM NO. PINS PER ROW –SM = 10µ" (0,25 µm) Gold on post, Matte Tin on tail (9,65) .380 No. of positions x (1,27) .050 + (18,03) .710 –F = Gold flash on post, Matte Tin on tail No. of positions x (1,27) .050 + (14,48) .570 02 Leave blank for ThroughHole version –TR = Tape & Reel Packaging (–LC not available) (1,27) .050 –RA