GOOD-ARK DF10 Glass passivated chip single-phase bridge rectifier Datasheet

DF005 THRU DF10
GLASS PASSIVATED CHIP SINGLE-PHASE BRIDGE RECTIFIER
Reverse Voltage - 50 to 1000 Volts
Forward Current - 1.0 Ampere
Features
Ideal for printed circuit board
Glass passivated chip junction
High temperature soldering guaranteed:
260 /10 seconds at 5 lbs tension
Mechanical Data
Terminals: Plated leads, solderable per
MIL-STD-202, method 208
Case: Molded with UL-94Class V-0 recognized
flame retartant epoxy
Polarity: Polarity symbol marked on body
Mounting Position: Any
Maximum Ratings and Electrical Characteristics
Single-phase, half-wave, 60Hz, resistive or inductive load.
Ratings at 25
unless otherwise stated.
For capacitive load, Derate current by 20%.
Characteristic
Symbols
DF005
DF01
DF02
DF04
DF06
DF08
DF10
Units
Volts
Maximum repetitive peak reverse voltage
VRRM
50
100
200
400
600
800
1000
Maximum RMS voltage
VRMS
35
70
140
280
420
560
700
Volts
Maximum DC blocking voltage
VDC
50
100
200
400
600
800
1000
Volts
Maximum average forward rectified current
at TA=40
I(AV)
1.0
Amp
Peak forward surge current
8.3mS single half sine-wave superimposed
on rated load
IFSM
50.0
Amps
Maximum forward voltage at
forward current perelement 1.0A
VF
1.1
Volts
I t-rating for fusion (t<8.3mS)
2
It
10.0
A 2S
IR
10.0
500.0
A
CJ
25.0
F
40.0
/W
2
Maximum DC reverse current
at rated DC blocking voltage
Typical junction capacitance (Note 1)
Typical thermal resistance (Note 2)
Operating temperature range
Storage temperature range
TA=25
TA=125
R
JA
TJ
-55 to +125
TSTG
-55 to +150
Notes:
(1) Measured at 1.0MHz and applied reverse voltage of 4.0 VDC
(2) Thermal resistance from junction to ambient on P.C. Board Mounted
1
RATINGS AND CHARACTERISTIC CURVES
2
Similar pages