Datenblatt / Data sheet N Netz-Gleichrichterdiode Rectifier Diode Zieldaten D 3041N Maßbild 1: Anode/Anode 1 2 2: Kathode/Cathode Seite/page 3/7 Datenblatt / Data sheet N Netz-Gleichrichterdiode Rectifier Diode R,t – Werte R R,T-Werte beidseitig two-sided anodenseitg anode-sided kathodenseitig cathode-sided Zieldaten D 3041N Analytische Elemente des transienten Wärmewiderstandes Z thJC Analytical elements of transient thermal impedance Z thJC Pos. n 1 2 3 4 5 Rthn [°C/W] 0,00295 0,002 0,00154 0,00098 0,00003 τn [s] 0,78008 0,13092 0,02165 0,00514 0,00104 Rthn [°C/W] 0,00804 0,00081 0,00239 0,0016 0,00046 τn [s] 5,11029 0,35916 0,09623 0,01197 0,00332 Rthn [°C/W] 0,0121 0,0004 0,00244 0,00155 0,00071 τn [s] 4,97289 0,48885 0,12071 0,01530 0,00427 Analytische Funktion / Analytical function: ZthJC = 6 nmax Σ n=1 Rthn 1 − e 7 -t τn Transienter innerer Wärmewiderstand für DC/ Transient thermal impedance Z thJC = f(t) for DC Beidseitige Kühlung / Two-sided cooling Anodenseitige Kühlung / Anode-sided cooling Kathodenseitige Kühlung / Cathode-sided cooling Seite/page 4/7 Datenblatt / Data sheet N Netz-Gleichrichterdiode Rectifier Diode D 3041N Zieldaten Diagramme Diagramme Durchlasskennlinie Grenzdurchlaßkennlinie / Limiting on-state characteristic iF = f(vF) Tvj = Tvj max Seite/page 5/7 N Netz-Gleichrichterdiode Rectifier Diode Datenblatt / Data sheet D 3041N Zieldaten Tc beidseitig Sperrverzögerungsladung / Recovered charge Qr = f(-di/dt) Tvj=Tvjmax, C = 1µF, R = 22Ω Seite/page 6/7 N Netz-Gleichrichterdiode Rectifier Diode Datenblatt / Data sheet D 3041N Zieldaten Ta bei Sinus Rückstromspitze / Peak reverse recovery current IRM = f(-di/dt) Tvj=Tvjmax, C = 1µF, R = 22Ω Seite/page 7/7 Terms & Conditions of Usage Attention The present product data is exclusively subscribed to technically experienced staff. This Data Sheet is describing the specification of the products for which a warranty is granted exclusively pursuant the terms and conditions of the supply agreement. There will be no guarantee of any kind for the product and its specifications. Changes to the Data Sheet are reserved. You and your technical departments will have to evaluate the suitability of the product for the intended application and the completeness of the product data with respect to such application. Should you require product information in excess of the data given in the Data Sheet, please contact your local Sales Office via “www.eupec.com / sales & contact”. Warning Due to technical requirements the products may contain dangerous substances. For information on the types in question please contact your local Sales Office via “www.eupec.com / sales & contact”.