POTTING BOXES POTTING BOXES Subject to technical modification without notice. Typographical and other errors do not justify any claim for damages. Stand: 01/02 e Copyright © 2002 OKW Gehäusesysteme GmbH, Buchen, Germany (http://www.okw.com) 209 POTTING BOXES Boxes for encapsulating electronic assemblies. With special cost advantages in cases of series production because potting electronic assemblies in pre-assembled cases is less complicated than casting liquid resin-hardener compounds in metal moulds. Potted assemblies are protected from shock and temperature, humidity and chemical influences. Production-limited surface quality. VERSION I M AT E R I A L Duroplastic. Resistant to deformation and extreme temperatures. Inflexible, therefore not resistant to fracture. Refer to the material specifications on pages 229-231. S TA N D A R D COLOUR Black. POTTING BOXES Part-No. Box A 80 20 130 A 80 25 150 A 80 25 251 A 80 30 150 A 80 40 160 A 80 40 250 A 80 40 130 A 80 40 200 A 80 45 150 A 80 45 250 A 80 50 150 A 80 50 160 A 80 50 250 A 80 50 500 A 80 70 200 A 80 70 350 A 80 90 200 A 80 10 250 A 80 10 400 210 Part-No. Lid – A 81 25 250 A 81 25 250 A 81 30 200 A 81 40 130 A 81 40 130 A 81 40 400 A 81 40 400 A 81 45 300 A 81 45 300 A 81 50 130 A 81 50 500 A 81 50 500 A 81 50 500 A 81 70 500 A 81 70 500 A 81 90 600 A 81 10 500 A 81 10 100 Outside dim. in mm A B C 20 20 13 25 25 15 25 25 25 30 20 15 40.6 13.8 16 40.4 13.7 25 40 40 13 40 40 20 45 30 15 45 30 25 50 13 15 50 50 15 50 50 25 50.7 50.7 50 70.5 50.5 20 70.8 50.8 35 90 60 20 100 50 25 100 100 40 Wall-thickness W (mm) 0.8 0.8 0.8 1.0 1.0 0.8 1.0 1.0 1.0 1.0 1.0 1.3 1.3 1.6 1.4 1.4 1.5 1.5 2.0 Due to adjustment of the production there are slight tolerances possible. Version I I I I I I I I I I I I I I I I I I I SERVICE-CENTRE See pages 221-227. POTTING BOXES M AT E R I A L Thermoplastic, polyamide 6.6. Good value for money. Almost unbreakable. With elastic side panels. Therefore only partly resistant to deformation. Refer to the material specifications on pages 229-231. S TA N D A R D COLOUR VERSION II Black. VERSION III SERVICE-CENTRE See pages 221-227. C 11.5 10.5 15.2 13.5 12.5 17.5 14 35 19 50 20 26.5 39 20 40.5 Wall thickness in mm W 0.8 0.6 0.6 0.6 0.8 0.8 0.8 1.0 1.0 1.5 1.0 1.2 1.2 1.0 1.0 Version II II II III III III III III III III III II II II III Part-No. A 80 14 118 A 80 17 108 A 80 17 158 A 80 18 138 A 80 20 128 A 80 21 178 A 80 22 148 A 80 26 358 A 80 29 198 A 80 30 508 A 80 32 208 A 80 39 268 A 80 39 398 A 80 40 208 A 80 46 408 POTTING BOXES Outside dim. in mm A B 14 14 17.3 14.8 17.3 14.8 18.4 18.4 20.5 20.5 21 13 22.3 22.3 26 26 28.7 28.7 30 30 32.3 32.3 38.8 38.8 38.8 38.8 40 10 46 46 211 POTTING BOXES M AT E R I A L VERSION III Thermoplastic, ABS. Good value for money. Preferably for potting small assemblies. Only partly resistant to temperature. Refer to the material specifications on pages 229-231. S TA N D A R D COLOUR POTTING BOXES Black. Part-No. A 80 12 159 A 80 21 129 A 80 25 159 A 80 38 209 A 80 45 169 A 80 67 469 212 Outside dim. in mm A B 12 12 21 21 25 25 38 20 45.5 30.5 67 35.5 C 15 12 15 20 16 46 Wall thickness in mm W 1.0 1.0 1.0 1.0 1.2 1.8 Version III III III III III III SERVICE-CENTRE See pages 221-227.