Panasonic EEEHA1V101P Aluminum electrolytic capacitors/ ha Datasheet

Aluminum Electrolytic Capacitors/ HA
Hight-temperature
assuranceize
Surface Mount Type
Series:
HA
Type:
V
HA
↑
■ Features
S
● Endurance: 105 °C 1000 h
● Vibration-proof product is available upon request.
(08 mm and larger)
● AEC-Q200 qualified ✽
● RoHS directive compliant
■ Specifications
Category Temp. Range
–40 °C to +105 °C
Rated W.V. Range
6.3 V.DC to 100 V.DC
Nominal Cap. Range
1 μF to 1500 μF
Capacitance Tolerance
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater)
DC Leakage Current
tan d
Please see the attached standard products list
Characteristics
at Low Temperature
W.V. (V)
6.3
10
16
25
35
50
63
100
Z(–25 °C)/Z(+20 °C)
4
3
2
2
2
2
3
3
Z(–40 °C)/Z(+20 °C)
8
6
4
4
3
3
4
4
(Impedance ratio at 120 Hz)
After applying rated working voltage for 1000 hours at +105 °C±2 °C and then being stabilized at +20 °C,
capacitors shall meet the following limits.
Endurance
Capacitance change
±20 % of initial measured value (6.3 W.V. of miniature : ±30 %)
tan d
< 200 % of initial specified value
DC leakage current
< initial specified value
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C,
capacitors shall meet the limits specified in Endurance. (With voltage treatment)
Shelf Life
After reflow soldering and then being stabilized at +20 °C, capacitor shall meet the following limits.
Capacitance change
Resistance to
Soldering Heat
±10 % of initial measured value
tan d
< initial specified value
DC leakage current
< initial specified value
■ Frequency correction factor for ripple current
Frequency (Hz)
50, 60
0.70
Correction factor
1k
1.30
■ Dimensions in mm (not to scale)
Capacitance (μF)
K )"
Lot number
Rated Voltage Mark
V
H
J
2A
35 V
50 V
63 V
100 V
(I)
(P)
W
Pressure Relief (010 and larger)
( ) Reference size
Size
code
D
L
A, B
H
I
W
P
B
4.0
5.4 +- 0.1
0.2
4.3
5.5 max.
1.8
0.65±0.1
1.0
0.35 +- 0.15
0.20
5.0
5.4
+ 0.1
- 0.2
5.3
6.5 max.
2.2
0.65±0.1
1.5
0.35 +- 0.15
0.20
+ 0.1
- 0.2
6.6
7.8 max.
2.6
0.65±0.1
1.8
0.35 +- 0.15
0.20
C
6.3 V
10 V
16 V
25 V
+
L
Series identification
Mark for Lead-Free
Products Black Dot
(Square)
Rated voltage Mark
A±0.2
B±0.2
Negative polarity
marking (–)
–
H
0D±0.5
0.3 max.
(Unit : mm)
(I)
Example:6.3 V 22 μF (Polarized)
Marking color : BLACK
j
A
C
E
10 k to
1.70
K
■ Marking
120
1.00
K
D
6.3
5.4
D8
6.3
7.7±0.3
6.6
7.8 max.
2.6
0.65±0.1
1.8
0.35 +- 0.15
0.20
E
8.0
6.2±0.3
8.3
9.5 max.
3.4
0.65±0.1
2.2
0.35 +- 0.15
0.20
F
8.0
10.2±0.3
8.3
10.0 max.
3.4
0.90±0.2
3.1
0.70±0.20
G
10.0
10.2±0.3
10.3
12.0 max.
3.5
0.90±0.2
4.6
0.70±0.20
✽ This product qualify for AEC-Q200, but it has some deviations.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Mar. 2014
– EEE-17 –
Aluminum Electrolytic Capacitors/ HA
■ Standard Products
Endurance : 105 °C 1000 h
Case size
W.V.
(V)
Cap.
(±20 %)
(μF)
22
33
47
100
6.3
220
330
470
1000
1500
22
33
47
10
100
220
470
1000
10
22
33
47
100
16
220
330
470
680
Dia.
Length
(mm)
4
4
4
5
5
6.3
6.3
6.3
8
8
8
10
10
4
4
5
5
6.3
8
6.3
8
8
10
10
4
4
5
5
5
6.3
6.3
6.3
8
10
8
10
8
10
10
(mm)
5.4
5.4
5.4
5.4
5.4
5.4
5.4
7.7
10.2
10.2
10.2
10.2
10.2
5.4
5.4
5.4
5.4
5.4
6.2
7.7
10.2
10.2
10.2
10.2
5.4
5.4
5.4
5.4
5.4
5.4
5.4
7.7
10.2
10.2
10.2
10.2
10.2
10.2
10.2
Min.
Packaging Q'ty
Specification
✽Size
Code
B
(B)
(B)
C
(C)
D
(D)
D8
F
(F)
(F)
G
G
(B)
(B)
C
(C)
(D)
E
D8
F
(F)
G
G
B
(B)
C
(C)
(C)
D
(D)
D8
(F)
G
(F)
G
(F)
G
G
Ripple
tan d
Current
(120 Hz) (120 Hz)
(+105°C) (+20 °C)
(mA r.m.s.)
29
0.30
29
0.35
36
0.35
46
0.30
47
0.35
71
0.30
74
0.35
105
0.30
230
0.35
300
0.35
300
0.35
400
0.35
480
0.35
28
0.30
29
0.30
43
0.22
43
0.30
71
0.30
110
0.26
105
0.22
160
0.26
200
0.26
270
0.26
400
0.26
28
0.16
28
0.26
39
0.16
35
0.26
39
0.26
70
0.16
70
0.26
105
0.16
150
0.20
210
0.20
170
0.20
230
0.20
340
0.20
340
0.20
380
0.20
Part No.
(RoHS:compliant)
EEEHA0J220R
EEEHA0J330WR
EEEHA0J470WR
EEEHA0J470R
EEEHA0J101WR
EEEHA0J101P
EEEHA0J221WP
EEEHA0J331XP
EEEHA0J331P
EEEHA0J471UP
EEEHA0J102UP
EEEHA0J102P
EEEHA0J152P
EEEHA1A220WR
EEEHA1A330WR
EEEHA1A330R
EEEHA1A470WR
EEEHA1A101WP
EEEHA1A101P
EEEHA1A221XP
EEEHA1A221P
EEEHA1A471UP
EEEHA1A471P
EEEHA1A102P
EEEHA1C100R
EEEHA1C220WR
EEEHA1C220R
EEEHA1C330WR
EEEHA1C470WR
EEEHA1C470P
EEEHA1C101WP
EEEHA1C221XP
EEEHA1C221UP
EEEHA1C221P
EEEHA1C331UP
EEEHA1C331P
EEEHA1C471UP
EEEHA1C471P
EEEHA1C681P
Reflow
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(2)
(2)
(2)
(2)
(2)
(1)
(1)
(1)
(1)
(1)
(2)
(1)
(2)
(2)
(2)
(2)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
Taping
(pcs)
2000
2000
2000
1000
1000
1000
1000
900
500
500
500
500
500
2000
2000
1000
1000
1000
1000
900
500
500
500
500
2000
2000
1000
1000
1000
1000
1000
900
500
500
500
500
500
500
500
✽ Size code( ):Miniaturization product
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Mar. 2014
– EEE-18 –
Aluminum Electrolytic Capacitors/ HA
■ Standard Products
Endurance : 105 °C 1000 h
Case size
W.V.
(V)
Cap.
(±20 %)
(μF)
4.7
10
22
33
25
47
100
220
330
470
4.7
10
22
33
35
47
100
220
50
330
0.1
0.22
0.33
0.47
1
2.2
3.3
4.7
10
22
33
47
100
220
Dia.
Length
(mm)
4
4
5
5
6.3
5
6.3
6.3
8
6.3
8
8
8
10
8
10
10
4
4
5
5
6.3
6.3
8
8
8
6.3
8
10
8
10
10
4
4
4
4
4
4
4
5
6.3
8
6.3
8
8
6.3
8
10
8
10
10
(mm)
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4
6.2
7.7
6.2
10.2
10.2
10.2
10.2
10.2
10.2
5.4
5.4
5.4
5.4
5.4
5.4
6.2
6.2
10.2
7.7
10.2
10.2
10.2
10.2
10.2
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4
5.4
6.2
7.7
6.2
10.2
7.7
10.2
10.2
10.2
10.2
10.2
Min.
Packaging Q'ty
Specification
✽Size
Code
B
(B)
C
(C)
D
(C)
D
(D)
E
D8
(E)
F
(F)
G
(F)
G
G
B
(B)
C
(C)
D
(D)
E
(E)
F
D8
(F)
G
(F)
G
G
B
B
B
B
B
B
B
C
D
E
D8
(E)
F
D8
(F)
G
(F)
G
G
Ripple
tan d
Current
(120 Hz) (120 Hz)
(+105°C) (+20 °C)
(mA r.m.s.)
22
0.14
22
0.20
28
0.14
35
0.20
55
0.14
45
0.20
65
0.14
70
0.20
91
0.16
91
0.14
91
0.16
130
0.16
160
0.16
190
0.16
180
0.16
340
0.16
360
0.16
22
0.12
22
0.16
30
0.12
35
0.16
60
0.12
42
0.16
84
0.14
84
0.14
98
0.14
84
0.12
120
0.14
160
0.14
170
0.14
210
0.14
250
0.14
1
0.12
2
0.12
3
0.12
5
0.12
10
0.12
16
0.12
16
0.12
23
0.12
35
0.12
70
0.12
70
0.12
70
0.12
91
0.12
63
0.12
95
0.12
100
0.12
110
0.12
120
0.12
150
0.12
Part No.
(RoHS:compliant)
Reflow
EEEHA1E4R7R
EEEHA1E100WR
EEEHA1E100R
EEEHA1E220WR
EEEHA1E220P
EEEHA1E330WR
EEEHA1E330P
EEEHA1E470WP
EEEHA1E470P
EEEHA1E101XP
EEEHA1E101UP
EEEHA1E101P
EEEHA1E221UP
EEEHA1E221P
EEEHA1E331UP
EEEHA1E331P
EEEHA1E471P
EEEHA1V4R7R
EEEHA1V100WR
EEEHA1V100R
EEEHA1V220WR
EEEHA1V220P
EEEHA1V330WP
EEEHA1V330P
EEEHA1V470UP
EEEHA1V470P
EEEHA1V101XP
EEEHA1V101UP
EEEHA1V101P
EEEHA1V221UP
EEEHA1V221P
EEEHA1V331P
EEEHA1HR10R ✽✽✽
EEEHA1HR22R ✽✽✽
EEEHA1HR33R ✽✽✽
EEEHA1HR47R ✽✽✽
EEEHA1H1R0R
EEEHA1H2R2R
EEEHA1H3R3R
EEEHA1H4R7R
EEEHA1H100P
EEEHA1H220P
EEEHA1H330XP
EEEHA1H330UP
EEEHA1H330P
EEEHA1H470XP
EEEHA1H470UP
EEEHA1H470P
EEEHA1H101UP
EEEHA1H101P
EEEHA1H221P
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(2)
(1)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(1)
(1)
(1)
(1)
(1)
(1)
(2)
(2)
(2)
(1)
(2)
(2)
(2)
(2)
(2)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(2)
(1)
(2)
(2)
(1)
(2)
(2)
(2)
(2)
(2)
Taping
(pcs)
2000
2000
1000
1000
1000
1000
1000
1000
1000
900
1000
500
500
500
500
500
500
2000
2000
1000
1000
1000
1000
1000
1000
500
900
500
500
500
500
500
2000
2000
2000
2000
2000
2000
2000
1000
1000
1000
900
1000
500
900
500
500
500
500
500
✽ Size code( ):Miniaturization product
✽✽✽ Please kindly accept last shipment : 31/Mar/2015
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Mar. 2014
– EEE-19 –
Aluminum Electrolytic Capacitors/ HA
■ Standard Products
Endurance : 105 °C 1000 h
Case size
W.V.
(V)
Cap.
(±20 %)
(μF)
10
22
63
33
47
3.3
4.7
10
100
22
33
47
Dia.
Length
(mm)
8
8
8
10
8
10
8
8
8
8
10
10
10
(mm)
6.2
6.2
10.2
10.2
10.2
10.2
6.2
6.2
10.2
10.2
10.2
10.2
10.2
Min.
Packaging Q'ty
Specification
✽Size
Code
E
(E)
F
G
(F)
G
E
(E)
F
(F)
G
G
(G)
Ripple
tan d
Current
(120 Hz) (120 Hz)
(+105°C) (+20 °C)
(mA r.m.s.)
25
0.18
25
0.18
30
0.18
45
0.18
45
0.18
50
0.18
30
0.18
30
0.18
55
0.18
55
0.18
60
0.18
65
0.18
65
0.18
Part No.
(RoHS:compliant)
EEEHA1J100P
EEEHA1J220UP
EEEHA1J220P
EEEHA1J330P
EEEHA1J470UP
EEEHA1J470P
EEEHA2A3R3P
EEEHA2A4R7UP
EEEHA2A100P
EEEHA2A220UP
EEEHA2A220P
EEEHA2A330P
EEEHA2A470UP
Reflow
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
Taping
(pcs)
1000
1000
500
500
500
500
1000
1000
500
500
500
500
500
✽ Size code( ):Miniaturization product
· Please refer to the page of “Reflow Profile” and “The Taping Dimensions”.
· When requesting vibration-proof product, please put the last “V” instead to “P”
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Mar. 2014
– EEE-20 –
Similar pages