0805 CHIP INDUCTORS Outgassing Compliant Chip InductorsAE336RAA The AE336RAA inductors provide exceptional Q values, even at high frequencies. They have a ceramic body and wire wound construction to provide the highest SRFs available in 0805 size. Part number1 Inductance2 (nH) AE336RAA020JSZ AE336RAA3N0JSZ AE336RAA030JSZ AE336RAA050JSZ AE336RAA060JSZ AE336RAA070JSZ AE336RAA080_SZ AE336RAA100_SZ AE336RAA120_SZ AE336RAA150_SZ AE336RAA180_SZ AE336RAA220_SZ AE336RAA240_SZ AE336RAA270_SZ AE336RAA330_SZ AE336RAA360_SZ AE336RAA390_SZ AE336RAA430_SZ AE336RAA470_SZ AE336RAA560_SZ AE336RAA680_SZ AE336RAA820_SZ AE336RAA910_SZ AE336RAA101_SZ AE336RAA111_SZ AE336RAA121_SZ AE336RAA151_SZ AE336RAA181_SZ AE336RAA221_SZ AE336RAA241_SZ AE336RAA271_SZ AE336RAA331_SZ AE336RAA391_SZ 2.8@ 250 MHz 3.0@ 250 MHz 3.3@ 250 MHz 5.6@ 250 MHz 6.8@ 250 MHz 7.5@ 250 MHz 8.2@ 250 MHz 10@ 250 MHz 12@ 250 MHz 15@ 250 MHz 18@ 250 MHz 22@ 250 MHz 24@ 250 MHz 27@ 250 MHz 33@ 250 MHz 36@ 250 MHz 39@ 250 MHz 43@ 200 MHz 47@ 200 MHz 56@ 200 MHz 68@ 200 MHz 82@ 150 MHz 91@ 150 MHz 100@ 150 MHz 110@ 150 MHz 120@ 150 MHz 150@ 100 MHz 180@ 100 MHz 220@ 100 MHz 240@ 100 MHz 270@ 100 MHz 330@ 100 MHz 390@ 100 MHz This robust version of Coilcraft’s standard 0805CS series features high temperature materials that pass NASA low outgassing specifications and allow operation in ambient temperatures up to 155°C. The leach-resistant base metalization with tin-lead (Sn-Pb) terminations ensures the best possible board adhesion. Percent SRF min4 DCR max5 tolerance Q min3 (MHz) (Ohms) 5 5 5 5 5 5 5,2 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 57@ 1000 MHz 61@ 1000 MHz 48@ 1000 MHz 75@ 1000 MHz 54@ 1000 MHz 56@ 1000 MHz 63@ 1000 MHz 57@ 500 MHz 46@ 500 MHz 41@ 500 MHz 48@ 500 MHz 59@ 500 MHz 59@ 500 MHz 56@ 500 MHz 64@ 500 MHz 57@ 500 MHz 44@ 250 MHz 45@ 250 MHz 44@ 250 MHz 49@ 250 MHz 52@ 250 MHz 51@ 250 MHz 49@ 250 MHz 54@ 250 MHz 38@ 250 MHz 52@ 250 MHz 33@ 100 MHz 37@ 100 MHz 36@ 100 MHz 36@ 100 MHz 36@ 100 MHz 36@ 100 MHz 34@ 100 MHz 5000 5000 5000 4760 4440 3840 3560 3460 3180 2560 2480 2080 1920 2060 1720 1520 1600 1440 1360 1280 1200 1060 1060 1000 880 880 730 730 650 610 580 520 480 0.06 0.06 0.08 0.08 0.11 0.14 0.12 0.10 0.15 0.17 0.20 0.22 0.22 0.25 0.27 0.27 0.29 0.34 0.31 0.34 0.38 0.42 0.48 0.46 0.48 0.51 0.56 0.64 0.70 1.00 1.00 1.40 1.50 Imax (mA) 800 800 600 600 600 600 600 600 600 600 600 500 500 500 500 500 500 500 470 460 440 400 390 390 390 380 340 340 330 270 260 230 210 1. When ordering, please specify tolerance and testing codes: AE336RAA821GSZ Tolerance: F = 1% G = 2% J = 5% Testing: Z = COTS H = Screening per Coilcraft CP-SA-10001 N = Screening per Coilcraft CP-SA-10003 2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP 4286A impedance analyzer or equivalent with Coilcraft-provided correlation pieces. 3. Q measured using an Agilent/HP 4291A with an Agilent/HP 16197A test fixture or equivalents. 4. SRF measured on an Agilent 8753ES or equivalent with a Coilcraft CCF1297 test fixture. 5. DCR measured on a Keithley micro-ohmmeter or equivalent and a Coilcraft CCF858 test fixture. 6. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Document AE100-1 Revised 11/06/12 ® © Coilcraft, Inc. 2012 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information. 0805 CHIP INDUCTORS AE336RAA Series (0805) Typical Q vs Frequency Typical L vs Frequency 100 12 nH 90 39 nH 22 nH 220 nH 80 6.8 nH 70 Inductance (nH) 68 nH Q Factor 1000 3.3 nH 120 nH 60 50 270 nH 40 30 100 nH 100 39 nH 15 nH 10 3.3 nH 20 10 0 1 10 100 1000 10,000 10 1000 100 Frequency (MHz) Frequency (MHz) Terminations Tin-lead (63/37) over silver-platinum-glass frit Current Derating Ambient temperature –55°C to +125°C with Imax current, +125°C to +155°C with derated current 120 Storage temperature Component: –55°C to +155°C. Packaging: –55°C to +80°C 100 Temperature Coefficient of Inductance (TCL) +25 to +155 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 2000 per 7″ reel Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.65 mm pocket depth Percent of rated Irms Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles 110 90 80 70 60 50 40 25°C Core material Ceramic 30 20 B overall A H C F I G J F E terminal F -20 0 20 40 60 80 100 120 140 160 Ambient temperature (°C) Suggested Land Pattern Terminal wraparound: approx 0.015/0,38 both ends E -40 I D A max B max C max D ref 10 0 G H I J 0.090 0.068 0.060 0.020 0.050 0.020 0.040 0.070 0.040 0.030 inches 2,29 1,73 1,52 0,51 1,27 0,51 1,02 1,78 1,02 0,76 mm Note: Dimensions are before solder application. For maximum overall dimensions including solder, add 0.0025 in / 0,064 mm to B and 0.006 in / 0,15 mm to A and C. Document AE100-2 Revised 11/06/12 ® © Coilcraft, Inc. 2012 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information.