2SC4853A Ordering number : ENA1076A SANYO Semiconductors DATA SHEET NPN Epitaxial Planar Silicon Transistor 2SC4853A Low-Voltage, Low-Current High-Frequency Amplifier Applications Features • Low-voltage, low-current operation : fT=5GHz typ (VCE=1V, IC=1mA) : ⏐S21e⏐2=7dB typ (f=1GHz) : NF=2.6dB typ (f=1GHz) Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Dissipation Conditions Ratings 12 V 6 V VEBO IC 1.5 V 15 mA 90 mW Junction Temperature PC Tj Storage Temperature Tstg 150 °C --55 to +150 °C Package Dimensions Product & Package Information unit : mm (typ) 7023A-009 • Package : MCP • JEITA, JEDEC : SC-70, SOT-323 • Minimum Packing Quantity : 3,000 pcs./reel 2SC4853A-4-TL-E 0.2 0.15 3 Packing Type: TL Marking 0 to 0.08 1.25 2.1 0.425 2.0 LOT No. 1 2 0.65 R A N K LOT No. TL 0.3 Electrical Connection 0.3 0.425 CN 0.9 Unit VCBO VCEO 1 : Base 2 : Emitter 3 : Collector SANYO : MCP 3 1 2 http://www.sanyosemi.com/en/network/ 80812 TKIM/D2408AB MSIM TC-00001797 No. A1076-1/8 2SC4853A Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current Ratings Conditions min typ ICBO IEBO VCB=5V, IE=0A VEB=1V, IC=0A Gain-Bandwidth Product hFE fT VCE=1V, IC=1mA VCE=1V, IC=1mA Output Capacitance Cob 2 ⏐S21e⏐ 1 VCB=1V, f=1MHz VCE=1V, IC=1mA, f=1GHz 2 ⏐S21e⏐ 2 VCE=2V, IC=3mA, f=1GHz 10.5 NF1 VCE=1V, IC=1mA, f=1GHz 2.6 NF2 VCE=2V, IC=3mA, f=1GHz 1.9 Emitter Cutoff Current DC Current Gain Forward Transfer Gain Noise Figure Unit max 60* 1.0 μA 10 μA 270* 5 GHz 0.6 4.5 1.0 7 pF dB dB 4.5 dB dB * : The 2SC4853A is classified by 1mA hFE as follows : Rank hFE 3 60 to 120 4 90 to 180 5 135 to 270 Ordering Information Device Package Shipping memo MCP 3,000pcs./reel Pb Free 2SC4853A-4-TL-E IC -- VCE 20 hFE -- IC 1000 7 18 14 10 105μA 90μA 75μA 8 60μA 6 45μA 12 30μA 4 1 0 2 3 4 5 6 Collector-to-Emitter Voltage, VCE -- V IT14232 7 5 2 3 5 7 1.0 7 VC 5 V =2 E 3 1V 2 1.0 7 5 2 3 5 7 10 Collector Current, IC -- mA 2 3 IT14233 Cob -- VCB 2 10 3 2 VCE=2V 1V 100 10 0.1 fT -- IC 2 2 2 IB=0μA 0 3 3 15μA 2 Gain-Bandwidth Product, fT -- GHz DC Current Gain, hFE 120μA 135μA 150μA Output Capacitance, Cob -- pF Collector Current, IC -- mA 5 16 f=1MHz 1.0 7 5 3 2 0.1 7 3 5 7 1.0 2 3 5 Collector Current, IC -- mA 7 2 10 ITR07582 5 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 2 ITR07583 Collector-to-Base Voltage, VCB -- V No. A1076-2/8 2SC4853A NF -- IC 10 Forward Transfer Gain, ⏐S21e⏐2 -- dB f=1GHz 6 4 V CE =1 V Noise Figure, NF -- dB 8 2 0 2 ⏐S21e⏐2 -- IC 14 2V f=1GHz 12 V =2 E VC 10 1V 8 6 4 2 0 3 5 7 2 1.0 3 5 7 2 10 Collector Current, IC -- mA ⏐S21e⏐2, NF -- V 2 5 7 2 1.0 3 Collector Current, IC -- mA CE 14 3 ITR07585 7 PC -- Ta 100 f=1GHz 5 ITR07584 90 IC=3mA Collector Dissipation, PC -- mW ⏐S21e⏐2, NF -- dB 12 10 2 ⏐S21e⏐ 1mA 8 6 4 IC=1mA NF 2 3mA 0 0 80 70 60 50 40 30 20 10 0 1 2 3 4 5 Collector-to-Emitter Voltage, VCE -- V 6 7 ITR07586 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT14234 No. A1076-3/8 2SC4853A S Parameters S11e f=200MHz to 2000MHz(200MHz Step) S21e f=200MHz to 2000MHz(200MHz Step) 90° j50 120° j25 j150 150° j200 j250 j10 10 25 50 100 150 250 Hz G 0.2 ±180° 2.0GH z 0 60° j100 VCE=2V IC=3mA --j10 VCE=2V IC=3mA 30° V =1 V CE=1mA IC Hz 2G 0. z GH 2.0 2 4 8 6 0 0.2GHz --j250 --j200 --j150 V C IC = E =1V 1m A --30° --150° --j100 --j25 --60° --120° --j50 --90° ITR07588 S12e f=200MHz to 2000MHz(200MHz Step) ITR07589 S22e f=200MHz to 2000MHz(200MHz Step) 90° j50 60° 120° j25 150° Hz 2G 0. ±180° j100 2.0 GH z j150 30° j200 j250 j10 V =2 A E m V C =3 IC 0.05 0.10 0.15 0.20 0 0 0.2 20 10 2.0G --j10 --30° --150° 0.5 Hz V =1 E C m V =1 A IC --j25 100 VCE=2V IC=3mA Hz G 0.2 --j250 --j200 --j150 VCE=1V IC=1mA --j100 --60° --120° --90° ITR07590 --j50 ITR07591 No. A1076-4/8 2SC4853A S Parameters (Common emitter) VCE=1V, IC=1mA, ZO=50Ω Freq(MHz) 200 400 600 800 1000 1200 1400 1600 1800 2000 ⏐S11⏐ 0.940 0.863 0.778 0.698 0.608 0.546 0.470 0.418 0.388 0.354 ∠S11 -17.9 -33.7 -48.0 -60.5 -73.5 -84.7 -96.2 -106.4 -117.3 -127.0 ⏐S21⏐ 3.228 2.983 2.732 2.469 2.320 2.106 1.977 1.826 1.700 1.615 ∠S21 159.6 143.7 129.9 117.7 106.2 96.3 87.1 78.8 72.2 65.9 ⏐S12⏐ 0.058 0.107 0.145 0.173 0.195 0.210 0.129 0.224 0.230 0.234 ∠S12 77.1 66.6 58.1 50.9 45.4 40.9 37.6 35.3 33.8 32.9 ⏐S22⏐ 0.972 0.914 0.844 0.773 0.717 0.668 0.624 0.590 0.562 0.546 ∠S22 -12.2 -22.7 -31.7 -39.6 -46.0 -51.7 -56.5 -60.6 -64.3 -67.5 ∠S11 -30.6 -53.7 -71.7 -85.7 -99.0 -111.4 -122.6 -134.7 -148.0 -157.2 ⏐S21⏐ 7.428 6.016 4.908 4.073 3.494 3.033 2.694 2.422 2.205 2.061 ∠S21 149.3 128.5 113.6 101.9 92.7 84.4 77.4 70.9 65.9 60.8 ⏐S12⏐ 0.050 0.083 0.105 0.121 0.135 0.150 0.162 0.175 0.189 0.205 ∠S12 71.4 60.6 55.1 52.5 51.4 50.9 50.9 51.0 51.1 51.0 ⏐S22⏐ 0.916 0.778 0.672 0.597 0.548 0.514 0.492 0.475 0.461 0.456 ∠S22 -18.3 -30.2 -37.1 -41.9 -45.7 -49.2 -52.3 -55.6 -59.0 -61.8 VCE=2V, IC=3mA, ZO=50Ω Freq(MHz) 200 400 600 800 1000 1200 1400 1600 1800 2000 ⏐S11⏐ 0.839 0.672 0.536 0.431 0.360 0.310 0.265 0.242 0.228 0.217 No. A1076-5/8 2SC4853A Embossed Taping Specification 2SC4853A-4-TL-E No. A1076-6/8 2SC4853A Outline Drawing 2SC4853A-4-TL-E Land Pattern Example Mass (g) Unit 0.006 mm * For reference Unit: mm 2.1 1.0 0.7 0.65 0.65 No. A1076-7/8 2SC4853A Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment. The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for new introduction or other application different from current conditions on the usage of automotive device, communication device, office equipment, industrial equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature, high current, high voltage, or drastic temperature change, even if it is used within the range of absolute maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a confirmation. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of August, 2012. Specifications and information herein are subject to change without notice. PS No. A1076-8/8