ACR-0851-1672 397 Route 281 – P.O. Box 1175 Tully, New York 13159-1175 Phone: 315 696-6676 Fax: 315 696 9923 Email: [email protected] www.acipower.com PRODUCT DATA SHEET – PAGE 1 OF 2 9.0” SINGLE BANK LED RAIL 5/1/08 (Single Bank, 85V @ 100mA) GENERAL DESCRIPTION Weight = TBD grams Altitude = 35,000 Ft maximum Humidity < 95% non-condensing Size (L x W x H) = 9.0 IN x 0.240 IN x 0.128 IN PCB thickness = 0.030 IN Input connector = CON1 RoHS compliant Page 1 of 2 0.128"+ 0.005 9.00" + 0.005 MECHANICAL / ENVIRONMENTAL CON1 The LED rail is compatible with both the I-Drive2 and IDrive3 LED driver platforms. Cable Legnth from Rail to Connector: 11.42" + .125 The rail requires the use of a constant current source to properly drive the LED’s. 0.240" + 0.005 The ACR-0851-1672 is designed as a replacement for field replaceable, dual tube, single edge lit 10.4” CCFL displays. The rail utilizes protection circuits to ensure the whole rail will not fail in the unlikely event of an individual LED failure. ACR-0851-1672 397 Route 281 – P.O. Box 1175 Tully, New York 13159-1175 Phone: 315 696-6676 Fax: 315 696 9923 Email: [email protected] www.acipower.com PRODUCT DATA SHEET – PAGE 2 OF 2 5/1/08 MAXIMUM RATINGS Symbol Tled Tstg Ifwd Parameter Operating temperature of LED edge light (light rail contact) LED Rail storage temperature Maximum LED edge-light forward current (DC) Value -20 to +75 -40 to +105 125 Unit Deg-C Deg-C Ma LED OPTICAL CHARACTERISTICS LED Manufacturer specifications for reference purpose only Symbol Parameter Test Conditions BL LED Brightness Ifwd = 350 mA X White X coordinate Y White Y coordinate Min 50 Typ 55 0.303 0.296 Max 60 Unit Lm - Min 77 Typ 85 Max 94 Unit Vdc LED RAIL ELECTRICAL CHARACTERISTICS Ifwd = 100mA, Tled = +75Deg-C (LED’s without heat sinking to the display) Symbol Parameter Test Conditions Vfwd LED rail forward voltage drop TYPICAL LED RAIL PERFORMANCE GRAPHS 90.0 10.00 80.0 8.00 70.0 6.00 60.0 4.00 50.0 2.00 40.0 30.0 0.00 0 20 40 60 80 100 LED current (mA) Rail Volt age Rail Power Page 2 of 2 Rail power (Watts) LED Voltage (Volts) Rail Voltage & Pow er vs. LED drive current (Ta = +25De g-C)