Crydom DRTX24B06X 6 amp ac and dc rated output Datasheet

SeriesOneDR Timer
• 6 Amp AC and DC Rated output
• Compact Size (11mm wide)
• Dual SCR or MOSFET output
• AC/DC control
• Zero-crossing (resistive loads) or random-fire (inductive loads) AC output
• Timer Status LED Indicator
• UL Listed, HP rated
• 8 Industry standard functions (A/At, B, C, D/Di, H/Ht, L/Li, Ac and Bw)
PRODUCT SELECTION
Control Voltage
AC output
DC Output
12-24 VAC/DC
90-140 VAC/DC
180-280 VAC/DC
DRTx24D06x
DRTx24B06x
DRTx24A06x
DRTx06D06
AVAILABLE OPTIONS
OUTPUT SPECIFICATIONS (1)
Description
Operating Voltage
Transient Overvoltage [Vpk] @ 25°C
Rated Load Current (2)
Rated Load Current {UL508 Motor Controller} (2) [Arms]
Minimum Load Current
Maximum Off-State Leakage Current @ Rated Voltage
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (3)
Maximum Surge Current (AC output 1 cycle. DC output 10ms)
Maximum I²t for Fusing [A² sec]
Maximum On-State Voltage Drop @ Rated Current [Vpk]
Maximum On-State Resistance (RDS-ON) [Ohms]
HP rating UL 508/IEC60947[HP (KW)]: 240 VAC
IEC 62314 LC-A [FLA]
IEC 62314 LC-B [Kw]
Wire Size min/max (solid/stranded) [AWG/ IEC mm²] (4)
Output Terminal Screw Torque [in lb (Nm)]
DRTx24
DRTx06
24-280 VAC (47-440Hz)
600
6 Arms
3.6 Arms
150 mArms
0.1 mArms
500
285/300 Apk (50/60Hz)
410/375 (50/60Hz)
1.3
NA
1/3 (0.24)
6A
1.44
22/12 [0.33/3.31]
7.0 (0.8)
1-48 Vdc
60 Vdc
6A
NA
100 mA
20 µA
NA
60 A
NA
0.3 Vdc
0.034
NA
NA
NA
22/12 [0.33/3.31]
7.0 (0.8)
INPUT SPECIFICATIONS (1)
Description
DRTxxxD06
DRTx24A06
DRTx24B06
Control Voltage Range
Must Turn-Off Voltage
Min Input Current @ Min Voltage (AC/DC) (for on-state)
Maximum Input Current @ Maximum Voltage
Nominal Input Impedance
Wire Size min-max (solid/stranded) [AWG/ IEC mm²] (4)
LED Status Indicator (Color)
Input Terminal Screw Torque [in lb (Nm)]
Maximum turn-on/off time
12-24 VAC/DC
1 VAC/DC
7.6/6.3 mA (5)
12.1/9.1 mA (6)
2K (7)
22-16 / 0.33-1.31
Yes (green)
4.4 (0.5)
See note 9
180-280 VAC/DC
20 VAC/DC
7.2/7.1 mA
9.7/9.6 mA
25K
22-16 / 0.33-1.31
Yes (green)
4.4 (0.5)
See note 9
90-140 VAC/DC
10 VAC/DC
7.6/7.4 mA
12.5/12.3 mA
12K
22-16 / 0.33-1.31
Yes (green)
4.4 (0.5)
See note 9
GENERAL SPECIFICATIONS
Description
Dielectric Strength, Input/Output/Base (50/60Hz)
Minimum Insulation Resistance (@ 500 V DC)
Maximum Capacitance, Input/Output
Ambient Operating Temperature Range
Ambient Storage Temperature Range
Weight (typical)
Housing Material
Terminal Finish
Humidity
RoHS Exemption #’s
Agency Approval
GENERAL NOTES
GENERAL NOTES
1) All parameters at 40°C and per section unless otherwise specified.
2) See derating curves.
3) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1
4) For UL Listing, must use wire rated @ 75°C
5) For DC output model minimum current spec is 15.7/12.4ma (AC/DC).
6) For DC output model maximum current spec is 27.9/20.3ma (AC/DC).
7) For DC output model, spec is 1K.
8) For DC output model, spec is 2500V
9) Activation Time = 65 ms / Deactivation Time = 100 ms
Parameters
3750 Vrms (8)
109 Ohm
10 pF
-30 to 80 °C
-40 to 125 °C
1.76 oz (50 g)
UL 94 V0 Self-extinguishing
Sulfamate Nickel
5 - 85% Non condensing
5(a), 7(a), 7(c)-I
UL 508 Listed, E116949
WIRING DIAGRAM
MECHANICAL SPECIFICATIONS
THERMAL DERATE INFORMATION
AGENCY APPROVALS
Designed in accordance with the requirements of IEC 62314
IEC 60068-2-6 : Vibration 0.35mm and 0.75mm Amplitutde over 10-55 Hz
IEC 60068-2-27 : Shock 15G/11ms
IEC 61000-4-2 : Electrostatic Discharge Level 3
IEC 61000-4-4 : Electrically Fast Transients Level 3
IEC 61000-4-5 : Electrical Surges Level 3
E116949
Rev. 120712
LED STATUS FUNCTION TABLE
ANNEX - ENVIROMENTAL INFORMATION
Similar pages