Series AM5TW-RZ 5 Watt | DC-DC Converter FEATURES: • RoHS compliant • 24 Pin DIP Package • High efficiency up to 84% • Wide 4:1 input range Models Single output Model Input Voltage (V) AM5TW-2403S-RZ AM5TW-2405S-RZ AM5TW-2407S-RZ AM5TW-2409S-RZ AM5TW-2412S-RZ AM5TW-2415S-RZ AM5TW-2418S-RZ AM5TW-2424S-RZ AM5TW-4803S-RZ AM5TW-4805S-RZ AM5TW-4807S-RZ AM5TW-4809S-RZ AM5TW-4812S-RZ AM5TW-4815S-RZ AM5TW-4818S-RZ AM5TW-4824S-RZ 9-36 9-36 9-36 9-36 9-36 9-36 9-36 9-36 18-72 18-72 18-72 18-72 18-72 18-72 18-72 18-72 Models Dual output Model Input Voltage (V) AM5TW-2403D-RZ AM5TW-2405D-RZ AM5TW-2407D-RZ AM5TW-2409D-RZ AM5TW-2412D-RZ AM5TW-2415D-RZ AM5TW-2418D-RZ AM5TW-2424D-RZ AM5TW-4803D-RZ AM5TW-4805D-RZ AM5TW-4807D-RZ AM5TW-4809D-RZ AM5TW-4812D-RZ AM5TW-4815D-RZ AM5TW-4818D-RZ AM5TW-4824D-RZ 9-36 9-36 9-36 9-36 9-36 9-36 9-36 9-36 18-72 18-72 18-72 18-72 18-72 18-72 18-72 18-72 Input Specifications Parameters Voltage range Filter Turn on Transient process time Start up time www.aimtec.com F 051e R12.E • • • • Output Voltage (V) Output Current max (mA) Output Voltage (V) Output Current max (mA) 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 ±3.3 ±5 ±7.2 ±9 ±12 ±15 ±18 ±24 ±3.3 ±5 ±7.2 ±9 ±12 ±15 ±18 ±24 Nominal 24 48 1300 1000 690 556 417 333 278 209 1300 1000 690 556 417 333 278 209 ±758 ±500 ±347 ±278 ±208 ±167 ±139 ±104 ±600 ±500 ±347 ±278 ±209 ±167 ±139 ±104 Operating temperature -40oC to + 85oC Input / Output Isolation 1500VDC Pin compatible with multiple manufacturers Continuous short circuit protection Isolation (VDC) 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 Isolation (VDC) 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 Typical 9-36 18-72 500 Tel: +1 514 620 2722 1 of 3 Max Capacitive Load (uF) Efficiency (%) 1000 680 4700 220 100 100 68 47 1000 680 4700 220 100 100 68 47 75 80 78 80 81 84 82 82 75 81 80 82 83 84 83 83 Max Capacitive Load (uF) Efficiency (%) ±470 ±330 ±100 ±68 ±47 ±47 ±22 ±22 ±470 ±330 ±100 ±68 ±47 ±47 ±22 ±22 Maximum 79 81 80 82 83 83 83 83 80 81 80 82 82 83 82 82 Units VDC π (Pi) Network 350 ms ms Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM5TW-RZ 5 Watt | DC-DC Converter Input Specifications (continued) Parameters Absolute Maximum Rating Peak Input Voltage time Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance Output Specifications Parameters Voltage accuracy Voltage balance (Dual Output Model) Short Circuit protection Short circuit restart Line voltage regulation (Single) Line voltage regulation (Dual) Load voltage regulation (Single) Load voltage regulation (Single) 3.3V output model Load voltage regulation (Dual) Load voltage regulation (Dual) ±3.3V output model Temperature coefficient Ripple & Noise Rising time General Specifications Parameters Nominal Typical 24 Vin 48 Vin Conditions ms Rated >1000 500 Conditions Typical Balanced Load ±1 ±1 ±0.5 ±0.5 ±0.5 0 – 100% load 0 – 100% load VDC MOhm pF Maximum Units Continuous Auto Recovery % % ±1.5 %/oC mV p-p ms ±0.02 60 10 Typical % % % % % % ±0.5 At 20MHz Bandwidth Units 1500 ±1.5 0 – 100% load 0 – 100% load Units VDC Typical 3 sec Conditions Maximum -0.7-40 -0.7-80 100 Maximum Units Switching frequency 100% load 260 KHz o Operating temperature Full Load without Derating -40 to +85 C o Storage temperature -40 to +125 C o Max Case temperature 100 C Cooling Free air convection Humidity 90 % Case material Nickel coated copper Weight 26 g Dimensions (L x W x H) Tolerance ±0.5 mm or ±0.02 inches 1.25 x 0.80 x 0.40 inches 31.80 x 20.30 x 10.20 mm MTBF >1 050 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) NOTE: All specifications noted in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Safety Specifications Parameters Agency Approval Standards www.aimtec.com F 051e R12.E CE EN55022 Class A, EN55024 IEC61000-4-2, Perf. Criteria B IEC61000-4-3, Perf. Criteria A IEC61000-4-4, Perf. Criteria B IEC61000-4-5, Perf. Criteria B IEC61000-4-6, Perf. Criteria A IEC61000-4-8, Perf. Criteria A NOTE: also designed to meet IEC 60950-1:2001 Tel: +1 514 620 2722 2 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM5TW-RZ 5 Watt | DC-DC Converter Pin Out Specifications Pin 2 3 9 11 14 16 22 23 Single -V Input -V Input No pin N.C. +V Output -V Output +V Input +V Input 1500VDC Dual -V Input -V Input Common -V Output +V Output Common +V Input +V Input Dimensions NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R12.E Tel: +1 514 620 2722 3 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only