Fujitsu FBR46ND024-P-15 Miniature relay 2 poles-1 to 2 a (for signal switching) Datasheet

MINIATURE RELAY
2 POLES—1 to 2 A (FOR SIGNAL SWITCHING)
FBR46 SERIES
FEATURES
n
l
l
l
l
l
RoHS compliant
Miniature size
About 50% smaller in volume compared with the FBR240 series used mainly in communication equipment.
High surge voltage
2,500 V minimum of surge strength (Bellcore standard), and 1,500
VAC minimum of dielectric strength between coil and contact (-15,
-16 type).
Low power consumption
85 mW of operate power (150 mW of nominal power con-
sumption) by built-in permanent magnet.
Shipping tube package
RoHS compliant since date code: 0433A
Please see page 7 for more information
To
be
Di
n ORDERING INFORMATION
[Example]
FBR46
(a)
N
(b)
D
(*)
012
(c)
sc
-P
(d)
-15
(e)
on
-CSA
(f )
ti
(a)
Series Name
FBR46 : FBR46 Series
(b)
Enclosure
N
: Plastic sealed
(*)
Coil Type
D
G
: Standard, -15, -16 (DC coil)
: 65% Operate type
(c)
Nominal Voltage
(Example)
(d)
Contact Material
(e)
Dielectric Strength
(f)
Safety Specification
nu
ed
Standard, -15, -16 type
(Example) Latching type
005: 5 VDC
05: 5 VDC
012: 12 VDC
12: 12 VDC
(refer to the COIL DATA CHART)
–P
: Gold-overlay silver-palladium
Nil
-15
-16
: Between coil and contacts 1,000 VAC, between contacts 750 VAC
: Between coil and contacts 1,500 VAC, between contacts 750 VAC
: Between coil and contacts 1,500 VAC, between contacts 1,000 VAC
Nil
: Standard (UL114 recognized)
-CSA : UL114 + CSA recognized
Note: The designation name is stamped on the top of the relay case as follows:
(Example) Designation ordered: FBR46ND012-P
Stamp: 46ND012-P
1
FBR46 SERIES
n COIL DATA CHART
1. STANDARD (D type)
Nominal
Coil
MODEL
resistance
voltage
(±10%)
Nominal
current
(at nominal
voltage)
approx.
FBR46ND003-P
3 VDC
60 Ω
50 mA
FBR46ND005-P
5 VDC
167 Ω
30 mA
FBR46ND006-P
6 VDC
240 Ω
25 mA
FBR46ND009-P
9 VDC
540 Ω
17 mA
To
FBR46ND012-P
12 VDC
960 Ω
13 mA
FBR46ND024-P
24 VDC
2,880 Ω
8 mA
be
Must
operate
voltage*1
Must
Nominal
Operate
release
power
power
voltage*1
75% max.
5% min.
of nominal of nominal
voltage
voltage
Approx.
Approx.
150 mW
85 mW
(at nominal
max.
voltage
200 mW
Coil
temperature
rise
Approx.
25 deg
(at nominal
voltage)
112 mW
30 deg
*1: Specified values are subject to pulse wave voltage.
Note: All values in the table are measured at 20°C
2. 65% OPERATE TYPE (G type)
Di
Nominal
Coil
MODEL
resistance
voltage
(±10%)
sc
Nominal
current
(at nominal
voltage)
approx.
FBR46NG003-P
3 VDC
36 Ω
83 mA
FBR46NG005-P 4.5 VDC
81 Ω
56 mA
FBR46NG006-P
6 VDC
144 Ω
41 mA
FBR46NG009-P
9 VDC
324 Ω
27 mA
FBR46NG012-P
12 VDC
576 Ω
20 mA
FBR46NG024-P
24 VDC
2,304 Ω
10 mA
Must
operate
voltage*1
Must
Nominal
Operate
release
power
power
voltage*1
on
ti
65% max.
10% min.
of nominal of nominal
voltage
voltage
*1: Specified values are subject to pulse wave voltage.
Note: All values in the table are measured at 20°C
Approx.
Approx.
250 mW
106 mW
(at nominal
max.
voltage
nu
Nominal
MODEL
Nominal
Coil
current
Must
Must
Nominal
Operate
resistance (at nominal operate 1
release
1
voltage
power
power
(±10%)
voltage)
voltage*
voltage*
-15 type
-16 type
approx.
3 VDC
45 Ω
67 mA
FBR46ND005-P-15 FBR46ND005-P-16
5 VDC
125 Ω
40 mA
FBR46ND006-P-15 FBR46ND006-P-16 6 VDC
180 Ω
33 mA
FBR46ND009-P-15 FBR46ND009-P-16 9 VDC
405 Ω
22 mA
FBR46ND012-P-15 FBR46ND012-P-16 12 VDC
720 Ω
17 mA
FBR46ND024-P-15 FBR46ND024-P-16
24 VDC
2,304 Ω
10 mA
75% max.
of
nominal
voltage
5% min.
of
nominal
voltage
Approx.
35 deg
(at nominal
voltage)
ed
3. HIGH DIELECTRIC STRENGTH TYPE (-15, -16 type)
FBR46ND003-P-15 FBR46ND003-P-16
Coil
temperature
rise
Coil
temperature
rise
Approx.
Approx.
Approx.
200 mW
112 mW
30 deg
(at nominal
max.
(at nominal
voltage)
voltage)
250 mW
140 mW
35 deg
*1: Specified values are subject to pulse wave voltage.
Note: All values in the table are measured at 20°C.
FBR46 SERIES
n SPECIFICATIONS
Item
Contact
Standard
-65% operate
MaterialGold-overlay silver-palladium
Maximum 100 mΩ (at 0.1 A 6 VDC)
Ratings (resistive)0.5 A 120 VAC or 1 A 30 VDC
Maximum Carrying Current
-16 type
Arrangement and Style2 form C (DPDT), bifurcated
Resistance (initial)
-15 type
To
Coil
Time Value
Life
Other
1.25 A
Maximum Switching Power60 AV or 30 W
125 V
Max. Switching Voltage*1
Maximum Switching Current
be
Minimum Switching load*
1A
20.01
Electrostatic Capacity
(reference)
mA 10 mVDC (reference)
Approximately 2 pF (between coil and contacts)
Approximately 1 pF (between open contacts)
Di
Nominal power (at 20°C)
150 to 200 mW
205 mW 200 to 250 mW
Operate power (at 20°C)
85 to 112 mW
106 mW
Operating Temperature
–30°C to +70°C (no frost) (refer to the CHARACTERISTIC DATA)
sc
112 to 114 mW
Operating Humidity 45 to 85%RH
on
Operate (at nominal voltage)
Maximum 5 ms
Release (at nominal voltage)
Maximum 5 ms
Mechanical50 × 106 operations minimum
Electrical (refer to the
REFERENCE DATA)
ti
DC
2 × 105 operations minimum (at contact rating)
AC
1 × 105 operations minimum (at contact rating)
nu
Vibration Resistance
10 to 55 Hz (double amplitude of 1.5 mm)
Shock
Resistance
Misoperation
500 m/s2 (11 ±1 ms)
Endurance
1,000 m/s2 (11 ±1 ms)
Weight
Approximately 2.5g
ed
*1 If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the
type of load.
*2 Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The
minimum switching load varies with the switching frequency and operation environment.
FBR46 SERIES
n INSULATION
Item
Standard
Resistance (initial)
(500 VDC)
Minimum 1,000 MΩ 1 min.
Dielectric Strength
To
Surge Voltage
-15 type
-16 type
open contacts
720VAC - 1 min.
coil and contact
adjacent contact
1,000 VAC -1min.
open contacts
750VAC
coil and contact
adjacent contact
1,500 VAC -1min.
open contacts
1,000VAC -1min.
coil and contact
adjacent contact
1,500 VAC -1min.
non-conducted terminals
1,500V
10 x 700µs standard wave
open contact
1,500V
10 x 700µs standard wave
be
65% operate
1,500 V
1,500 V
n SAFETY STANDARDS
750 V
750 V
10μs
10μs
Di
700μs
700μs
sc
coil and contact
adjacent contact
2,500V
2 x 10µs standard wave
2,500 V
1,250 V
on
2μs
ti
10μs
Type
Compliance
Contact rating
UL
UL 114
Flammability: UL 94-V0 (plastics)
0.3A, 250VAC (resistive)
1A, 30VDC
E63615
CSA
C22.2 No. 14
LR 40304, LR 64026
nu
ed
FBR46 SERIES
n CHARACTERISTIC DATA
Mus
Nominal voltage multiplying factor (%)
80
ltage
70
Must
te vo
opera
–10 0 10 20 30 40 50 60 70 80
–10 0 10 20 30 40 50 60 70 80
Operating temperature (°C)
Operating temperature (°C)
be
1.0
À
Á
0.5
0.3
Di
500
100
50
10
5
1
0.1
10
20 30
50
120
Life curve
(´104)
Service life (operations)
Contact load current (A)
90
Operating temperature (°C)
ÀAC resistive load
( AC contact rating)
ÁDC resistive load
( DC contact rating)
sc
30 V DC resistive load
on
120 V AC
resistive load
0.5
200
1.0
ti
1.5
2.0
nu
Contact load current (A)
Contact load voltage (V)
n REFERENCE DATA
Distribution of operate and release voltage
Distribution of operate and release time
80
80
Operate
Release
Distribution (%)
40
20
Distribution (%)
80
60
60
40
0
0
20
30
40
50
60
70
80
Rated coil voltage multiplying factor (%)
60
40
20
20
10
ed
Distribution of contact resistance
100
Operate
Release
Distribution (%)
100
–10 0 10 20 30 40 50 60 70 80
Maximum switching capacity
0
Operating voltage range
110
ge
erate
t op
70
e
g
volta
120
volta
pera
80
130
coil
to
Mus
70
e
ltag
te vo
90
140
able
llow
80
100
150
a
um
To
90
Operating voltage range
110
ge
100
120
volta
Operating voltage range
110
130
coil
120
140
able
allow
130
150
imum
ge
volta
coil
able
allow
140
(Data) assumes that
the maximum
allowable temperature of E
type insulation coil is
115°C
160
Max
imum
Max
150
(Data) assumes that
the maximum
allowable temperature of E
type insulation coil is
115°C
160
Range of operation temperature and voltage
[–15,–16 type]
im
Max
(Data) assumes that
the maximum
allowable temperature of E
type insulation coil is
115°C
160
Nominal voltage multiplying factor (%)
Range of operation temperature and voltage
[G type]
Nominal voltage multiplying factor (%)
Range of operation temperature and voltage
[D type]
0
0
1
2
3
4
5
Time (ms)
6
7
8
0
10
20
30
40
50
60
70
Contact resistance (mΩ)
80
FBR46 SERIES
n DIMENSIONS
9.8+0.1
3.5
7.9+0.1
15.9+0.1
■ Schematics
(BOTTOM VIEW)
5.08
■Tube carrier
(1.09)
5 6
12
10
8 7
Polarity
7.62
8–ø0.8
5.08 5.08 2.54
.54
be
Di
501 maximum
sc
15.8 maximum
12.8 max.
5.08
3
■ Dimensions (Latching type)
( )
nu
7.9+0.1
9.8+0.1
ti
■ Schematics
(BOTTOM VIEW)
1 2 3
5 6
3.5
15.9+0.1
on
10
12 11
8 7
]
2.54
5.08
(1.0)
5.08
(1.09)
7.62
2.54
( )
■ PC board mounting hole
layout (BOTTOM VIEW)
2.54
ed
7.62
To
(1.0)
1
■ PC board mounting hole
layout (BOTTOM VIEW)
7.62
■ Dimensions
5.08 5.08 2.54
10–ø0.8
polarity
Note: ·No 2, 11 terminals are for double winding latching type only.
·(
)(
) are reset polarity for single winding latching type.
■ Tube carrier
·The terminal number is not shown on the relay.
15.8 maximum
12.8 max.
501 maximum
Unit: mm
FBR46 SERIES
RoHS Compliance and Lead Free Relay Information
1. General Information
Relays produced after the specific date code that is indicated on each data sheet are lead-free
now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info.
(http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf)
l
Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu.
l
All signal and most power relays also comply with RoHS. Please refer to individual data
sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that
are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE).
l
It has been verified that using lead-free relays in leaded assembly process will not cause any
problems (compatible).
l
“LF” is marked on each outer and inner carton. (No marking on individual relays).
l
To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office.
l
We will ship leaded relays as long as the leaded relay inventory exists.
Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC)
l
To
be
Di
2. Recommended Lead Free Solder Profile
l
sc
Recommended solder paste Sn-3.0Ag-0.5Cu.
Reflow Solder condition
Flow Solder condition:
Pre-heating:
Soldering:
maximum 120˚C
dip within 5 sec. at
260˚C soler bath
Solder by Soldering Iron:
Soldering Iron
Temperature: maximum 360˚C
Duration:
maximum 3 sec.
on
ti
nu
ed
We highly recommend that you confirm your actual solder conditions
3. Moisture Sensitivity
l
Moisture Sensitivity Level standard is not applicable to electromechanical realys.
4. Tin Whisker
l
Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in
house test.
FBR46 SERIES
Fujitsu Components International Headquarter Offices
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Web: www.fcl.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Web: emea.fujitsu.com/components/
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: [email protected]
Web: http://www.fujitsu.com/us/services/edevices/components/
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: [email protected]
Web: http://www.fujitsu.com/sg/services/micro/components/
To
be
©2009 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.
Di
Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our
products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice.
Rev. June 30, 2009.
sc
on
ti
nu
ed
Similar pages