CLARE CPC1219Y 4-pin sip optomosâ® relay Datasheet

CPC1219
4-Pin SIP OptoMOS® Relay
Blocking Voltage
Load Current
Max RON
Input Voltage to operate
CPC1219Y
60
200
16
5-12
Description
Units
VP
mA
Ω
V
Features
• 100% Solid State
• Voltage-controlled operation
• Designed for use in security systems complying
with EN50130-4
• Small 4-Pin SIP Package
• Arc-Free With No Snubbing Circuits
• 2500Vrms Input/Output Isolation
• No EMI/RFI Generation
• Immune to radiated EM fields
• Auto Pick & Place, Wave Solderable
The CPC1219 is a voltage-controlled,
single-pole, normally closed (1-Form-B) optically
coupled solid state relay configuration in a 4-pin Single
In-line Package (SIP). Clare's patented OptoMOS
architecture makes available the optically coupled
technology necessary to activate the output's efficient
MOSFET switches while providing a 2500Vrms
input-to-output isolation barrier. Control of the isolated
output is accomplished by means of a highly effective
GaAlAs infrared LED at the input. An internal resistor
in series with the LED enables the input
voltage-controlled operation.
Because the input is solid state there is no need for
snubbers or "catch" diodes to suppress the inductive
flyback transient voltage normally associated with EMR
coils.
Approvals
• UL and CSA Pending
Ordering Information
Applications
• Security
• Passive Infrared Detectors (PIR)
• Data Signalling
• Sensor Circuitry
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Energy Meters
• Medical Equipment—Patient/Equipment Isolation
• Aerospace
• Industrial Controls
Part #
CPC1219Y
Description
4-Pin SIP (25/tube)
Pin Configuration
CPC1219 Pinout
1
2
3
4
Load
IN +
IN -
Load
Switching Characteristics
of Normally Closed (Form B) Devices
CONTROL
+
ILOAD
TOFF
Pb
RoHS
2002/95/EC
DS-CPC1219-R04
90%
+10%
TON
e3
www.clare.com
1
CPC1219
Absolute Maximum Ratings (@ 25˚ C)
Parameter
Blocking Voltage
Reverse Input Voltage
Input Control Voltage
Input Power Dissipation
Total Power Dissipation 1
Isolation Voltage Input to Output
Operational Temperature
Storage Temperature
1
Ratings
60
5
15
225
800
2500
-40 to +85
-40 to +125
Units
VP
V
V
mW
mW
Vrms
°C
°C
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Derate Linearly 6.67 mW / ºC
Electrical Characteristics
Parameter
Output Characteristics @ 25°C
Load Current, Continuous 1
Peak Load Current
On-Resistance 2
Off-State Leakage Current
Switching Speeds
Turn-On (Output Closed)
Turn-Off (Output Open)
Output Capacitance
Input Characteristics @ 25°C
Input Control Voltage
Output Open
Output Closed
Recommended Operating Range
Reverse Input Current
Input Resistor
Common Characteristics @ 25°C
Capacitance Input to Output
1
2
2
Conditions
Symbol
Min
Typ
Max
Units
t≤10ms
IL=200mA
VL=60V, VIN=5V
IL
ILPK
RON
ILEAK
-
-
200
400
16
1
mA
mA
Ω
VIN = 5V, VL = 10V
tON
tOFF
-
-
5
5
ms
ms
VIN=5V, VL=50V, f=1MHz
COUT
-
25
-
pF
-
-
3.75
V
IL = 200mA
VIN
VIN = -5V
-
IR
-
1
5
900
1000
12
10
1100
V
V
μA
Ω
-
-
-
1
-
pF
μA
Load current derates linearly from 200mA @ 25oC to 125mA @80oC.
Measurement taken within 1 second of on time.
www.clare.com
R04
CPC1219
PERFORMANCE DATA*
Typical On-Resistance Distribution
(TA=25ºC, IL=100mA, VIN=0V)
35
35
25
20
15
10
Device Count (N)
Device Count (N)
25
20
15
10
5
5
4.9
5.0
5.1
5.2
5.3
5.4
5.5
89
90
On-resistance (Ω)
Typical VOFF for Switch Dropout
(TA=25ºC, IL=100mA)
15
10
5
1.23
1.24 1.25 1.26
Input Voltage (V)
1.27
10
5
Typical Maximum Load Current
vs. Temperature
0.16
75
Typical Leakage vs. Temperature
(Measured Across Pins 1 & 4)
(VIN=5V, VL=60V)
0
0
20
40
60
80
Temperature (ºC)
100
120
-40
Typical Turn-On vs. Temperature
(IL=100mA)
VIN = 5V
-20
0
20
40
60
Temperature (ºC)
80
100
1.27
1.28
15
10
5
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
-40
-20
0
20
40
60
Temperature (ºC)
80
20
40
60
Temperature (ºC)
0.76
0.83
102
100
98
96
94
92
90
-40
100
-20
0
20
40
60
80
100
Temperature (ºC)
VIN = 5V
0
0.55 0.62 0.69
Turn-Off (ms)
Typical Blocking Voltage vs. Temperature
(VIN=5V)
Typical Turn-Off vs. Temperature
(IL=100mA)
-20
0.48
104
0.06
25
0
1.26
20
0.41
0.08
0.02
-20
1.25
Typical Turn-Off Time
(TA=25ºC, IL=100mA, VIN=5V)
0.70
0.10
0.04
-40
0.63
0.12
50
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
0.42 0.49 0.56
Turn-On (ms)
Blocking Voltage (VP)
100
Leakage (μA)
125
Turn-Off (ms)
Load Current (mA)
VIN = 0V
150
-40
0.35
0.14
175
1.24
0
0.28
200
1.23
25
15
1.28
225
5
1.22
0
1.22
10
Input Voltage (V)
20
0
15
95
Device Count (N)
20
91
92
93
94
Blocking Voltage (VP)
Typical Turn-On Time
(TA=25ºC, IL=100mA, VIN=5V)
25
Device Count (N)
Device Count (N)
25
20
0
0
0
Turn-On (ms)
Device Count (N)
25
30
30
Turn-On (ms)
Typical Input Voltage for Switch Operation
(TA=25ºC, IL=100mA)
Typical Blocking Voltage Distribution
(TA=25ºC, VIN=5V)
80
100
Typical Turn-On vs. Input Voltage
(TA=25ºC, IL=100mA)
0.54
0.53
0.52
0.51
0.50
0.49
0.48
0.47
0.46
0.45
0.44
0
5
10
15
20
Input Voltage (V)
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application
department.
R04
www.clare.com
3
CPC1219
PERFORMANCE DATA*
Typical On-Resistance vs. Temperature
(IL=Max Rated @ Temperature)
2.1
On-Resistance (Ω)
1.5
1.2
0.9
0.6
1.30
7
Steady State
6
0.3
0
3
2
4
6
8 10 12 14
Input Voltage (V)
16
18
1.30
-20
0
20
40
60
Temperature (ºC)
80
100
Load Current (mA)
1.24
1.22
1.20
Typical Load Current vs. Load Voltage
(TA=25ºC, VIN=0V)
100
50
0
-50
-100
-150
1.18
-40
-20
0
20
40
60
Temperature (ºC)
80
100
1.26
1.24
-40
-200
-1.0 -0.75 -0.50 -0.25 0 0.25 0.50 0.75
Load Voltage (V)
1.0
-20
0
60
20
40
Temperature (ºC)
80
100
Energy Rating Curve
150
1.26
1.28
1.20
200
1.28
Typical Input Voltage for
Switch Operation vs. Temperature
(IL=100mA)
1.22
-40
20
Typical Input Voltage for
Switch Dropout vs. Temperature
(IL=100mA)
VIN = 0V
5
4
0
Input Voltage (V)
1.32
8
Load Current (mA)
Turn-Off (ms)
1.8
9
Input Voltage (V)
Typical Turn-Off vs. Input Voltage
(TA=25ºC, IL=100mA)
500
450
400
350
300
250
200
150
100
50
0
10μs 100μs 1ms 10ms 100ms
Time
1s
10s 100s
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application
department.
4
www.clare.com
R04
MANUFACTURING INFORMATION
Soldering
For proper assembly, the component must be
processed in accordance with the current revision
of IPC/JEDEC standard J-STD-020. Failure to
follow the recommended guidelines may cause
permanent damage to the device resulting in impaired
performance and/or a reduced lifetime expectancy.
Washing
Clare does not recommend ultrasonic cleaning or the
use of chlorinated solvents.
Pb
RoHS
2002/95/EC
e3
MECHANICAL DIMENSIONS
4-Pin SIP
3.302 ± 0.051
(0.130 ± 0.002)
19.202 ± 0.381
(0.756 ± 0.015)
6.401 ± 0.127
(0.252 ± 0.005)
2.642 ± 0.127 TYP
(0.104 ± 0.005 TYP)
5.944 ± 0.127 TYP
(0.234 ± 0.005 TYP)
PIN 1
0.457 ± 0.076 TYP
(0.018 ± 0.003 TYP)
5.080 ± 0127
(0.200 ± 0.005)
3.251 ± 0.102
(0.128 ± 0.004)
5.080 ± 0127
(0.200 ± 0.005)
NOTES:
1. Leadframe thickness does not include plating. (1000 microinches maximum)
2. Pin location tolerances are non-accumulative.
0.254 ± 0.013
(0.010 ± 0.0005)
Dimensions:
mm
(inches)
For additional information please visit our website at: www.clare.com
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of
Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability,
fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental
damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-CPC1219-R04
©Copyright 2008, Clare, Inc.
OptoMOS® is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
8/27/08
5
Similar pages