Europe: +49 / 7731 8399 0 | Email: info@meder.com Item No.: USA: +1 / 508 295 0771 | Email: salesusa@meder.com Asia: +852 / 2955 1682 | Email: salesasia@meder.com 8812285200 Item: BE12-2A85-M Coil Data at 20 °C Conditions Min Typ Max Unit Conditions Min Typ Max Unit Coil resistance Coil voltage Rated power Pull-In voltage Drop-Out voltage Contact Data 85 Contact rating Switching voltage Switching current Carry current Contact resistance static Contact resistance dynamic Insulation resistance Breakdown voltage (30-40 AT) Operate time incl. bounce Release time Special Product Data Insulation resistance Coil/Contact Insulation voltage Coil/Contact Housing material Connection pins Environmental data Shock Vibration Ambient temperature Storage temperature Soldering temperature Cleaning not to exceed their individual max.'s DC or Peak AC DC or Peak AC ! 100% Duty Cycle Measured with 40% overdrive Maximum value 1,5 ms after excitation RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation Conditions " # # Min Typ Max RH <45%, 200 VDC test voltage according to IEC 255-5 Unit " ! Metal Copper alloy tin plated Conditions Min Typ Max 1/2 sine wave duration 11ms from 10 - 2000 Hz ' ' & wave soldering max. 5 sec ( Unit $ $ % % % fully sealed Modifications in the sense of technical progress are reserved Designed at: 15.03.06 Designed by: WKOVACS Approval at: Last Change at: 15.03.06 Last Change by: WKOVACS Approval at: 21.10.08 Approval by: RUDI RIPPL Approval by: KOLBRICH Version: 01