AZETTLER AZ9621-1C-24D 10 amp miniature pc board relay Datasheet

AZ9621
10 AMP MINIATURE
PC BOARD RELAY
FEATURES
•
•
•
•
•
•
•
Extremely low cost
Epoxy sealed version available
High temperature (105°C) version available
Creepage/Clearance 4mm/3mm
Class F insulation (155°C) standard
UL, CUR file E44211
VDE file pending
Life Expectancy
Mechanical
Electrical
CONTACTS
Arrangement
SPST (1 Form A)
SPDT (1 Form C)
Ratings
Form A and C
Max. switched power: 2500 VA
Max. switched current: 10 A AC
Max. switched voltage: 250 VAC
UL/CUR
Operate Time (Typical) 15 ms
Release Time (Typical) 15 ms
(with no coil suppression)
Dielectric Strength
2500 Vrms contact to coil
(at sea level for 1 min.) 1000 Vrms across contacts
Insulation Resistance
1 Form A (high temperature version)
10 A at 250 VAC, General Purpose, 30k cycles
100 megohms min. at 500 VDC,
50% RH
Dropout
Greater than 10% of nominal coil voltage
1 Form C (high temperature version)
10 A (N.O.), 4 A (N.C.) at 250 VAC, General Purpose,
30k cycles
(pending)
5 x 106
5 x 104 at 10 A 250 VAC Res.
1 Form A (standard temperature version)
10 A at 250 VAC, General Purpose, 50k cycles
1 Form C (standard temperature version)
10 A (N.O.), 5 A (N.C.) at 250 VAC, General Purpose,
30k cycles
VDE
GENERAL DATA
1 Form A
10 A at 250 VAC, 30k cycles
1 Form C
10 A (N.O.), 4 A (N.C.) at 250 VAC, 30k cycles
Material
Silver nickel
Resistance
< 100 milliohms initially
(24 V, 1 A method)
COIL
Ambient Temperature
At nominal coil voltage
Operating
-40°C (-40°F) to 85°C (185°F) Std. Temp.
-40°C (-40°F) to 105°C (221°F) High Temp.
Storage
-40°C (-40°F) to 155°C (311°F)
Vibration
>4g at 30-400 Hz
Shock
>10g (functional)
>30g (destructive)
Enclosure
P.E.T. polyester
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
260°C (500°F)
Max. Solder Time
5 seconds
Max. Immersion Time
30 seconds
Weight
5.6 g
Power
At Pickup Voltage
Max Continuous
Dissipation
200 mW
1.8 W at 20°C (68°F)
1. All values at 20°C (68°F).
Temperature Rise
33°C (59.4°F) at nominal coil voltage
2. Relay may pull in with less than “Must Operate” value.
Temperature
Max. 155°C (311°F)
3. Unsealed relays should not be dip cleaned.
NOTES
4. Specifications subject to change without notice.
9/28/05W
AZ9621
RELAY ORDERING DATA
STANDARD RELAYS
COIL SPECIFICATIONS
ORDER NUMBER*
Nominal Coil
VDC
5
Max. Continuous
VDC
8.0
Coil Resistance
±10%
70
Must Operate
VDC
3.75
AZ9621–1A–5D
AZ9621–1C–5D
6
10.0
100
4.50
AZ9621–1A–6D
AZ9621–1C–6D
AZ9621–1C–9D
1 Form A
1 Form C
9
14.5
225
6.75
AZ9621–1A–9D
12
18.5
400
9.00
AZ9621–1A–12D
AZ9621–1C–12D
18
26.0
900
13.50
AZ9621–1A–18D
AZ9621–1C–18D
22
34.0
1345
16.5
AZ9621–1A–22D
AZ9621–1C–22D
24
35.5
1600
18.0
AZ9621–1A–24D
AZ9621–1C–24D
36
53.3
3600
27.0
AZ9621–1A–36D
AZ9621–1C–36D
* Add suffix “E” for epoxy sealed version. Add suffix “K” for high temperature version.
MECHANICAL DATA
Form C
Form A
.601 MAX
[15.25]
Wiring Diagram
.601 MAX
[15.25]
.601 MAX
[15.25]
.601 MAX
[15.25]
1
2
5
.797 MAX
[20.25]
Form A
.797 MAX
[20.25]
.150
[3.80]
.150
[3.80]
.020
[0.50]
.020
[0.50]
.295
[7.50]
.246
[6.25]
TERMINAL DISTANCE
.012
[0.30]
.039
[1.00]
.020
[0.50]
.020
[0.50]
.039
[1.00]
.197
[5.00]
1
2
.012
[0.30]
.394
[10.00]
3
.197
[5.00]
4
5
3
Form C
.295
[7.50]
.197
[5.00]
.246
[6.25]
.197
[5.00]
.049
[1.25]
Viewed toward terminals
TERMINAL DISTANCE
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
9/28/05W
Similar pages