APT30M36B2FLL
APT30M36LFLL
300V
POWER MOS 7
R
FREDFET
FREDFET
84A 0.036Ω
B2FLL
®
Power MOS 7 is a new generation of low loss, high voltage, N-Channel
enhancement mode power MOSFETS. Both conduction and switching
®
losses are addressed with Power MOS 7 by significantly lowering RDS(ON)
®
and Qg. Power MOS 7 combines lower conduction and switching losses
along with exceptionally fast switching speeds inherent with APT's
patented metal gate structure.
• Lower Input Capacitance
• Lower Miller Capacitance
• Lower Gate Charge, Qg
VDSS
ID
TO-264
LFLL
• Increased Power Dissipation
• Easier To Drive
• Popular T-MAX™ or TO-264 Package
• FAST RECOVERY BODY DIODE
MAXIMUM RATINGS
Symbol
T-MAX™
D
G
S
All Ratings: TC = 25°C unless otherwise specified.
Parameter
APT30M36B2FLL_LFLL
UNIT
300
Volts
Drain-Source Voltage
84
Continuous Drain Current @ TC = 25°C
Amps
IDM
Pulsed Drain Current
VGS
Gate-Source Voltage Continuous
±30
VGSM
Gate-Source Voltage Transient
±40
Total Power Dissipation @ TC = 25°C
568
Watts
Linear Derating Factor
4.55
W/°C
PD
TJ,TSTG
1
336
Operating and Storage Junction Temperature Range
TL
Lead Temperature: 0.063" from Case for 10 Sec.
IAR
Avalanche Current
EAR
Repetitive Avalanche Energy
EAS
Single Pulse Avalanche Energy
1
Volts
-55 to 150
°C
300
Amps
84
(Repetitive and Non-Repetitive)
1
50
4
mJ
2500
STATIC ELECTRICAL CHARACTERISTICS
MIN
BVDSS
Drain-Source Breakdown Voltage (VGS = 0V, ID = 250µA)
300
RDS(on)
Drain-Source On-State Resistance
IDSS
IGSS
VGS(th)
2
(VGS = 10V, ID = 42A)
TYP
MAX
UNIT
Volts
0.036
Ohms
Zero Gate Voltage Drain Current (VDS = 300V, VGS = 0V)
250
Zero Gate Voltage Drain Current (VDS = 240V, VGS = 0V, TC = 125°C)
1000
Gate-Source Leakage Current (VGS = ±30V, VDS = 0V)
±100
nA
5
Volts
Gate Threshold Voltage (VDS = VGS, ID = 2.5mA)
3
CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed.
APT Website - http://www.advancedpower.com
µA
7-2004
Characteristic / Test Conditions
050-7161 Rev B
Symbol
APT30M36B2FLL_LFLL
DYNAMIC CHARACTERISTICS
Symbol
Ciss
Characteristic
Test Conditions
Input Capacitance
Coss
VGS = 0V
Output Capacitance
VDS = 25V
Crss
Reverse Transfer Capacitance
f = 1 MHz
Qg
3
Total Gate Charge
Gate-Source Charge
Qgd
Gate-Drain ("Miller") Charge
td(on)
Turn-on Delay Time
RESISTIVE SWITCHING
VGS = 15V
VDD = 150V
tf
ID = 84A @ 25°C
Fall Time
Turn-on Switching Energy
Eoff
Turn-off Switching Energy
INDUCTIVE SWITCHING @ 25°C
6
Eon
Turn-on Switching Energy
Eoff
Turn-off Switching Energy
ns
730
VDD = 200V, VGS = 15V
765
ID = 84A, RG = 5Ω
INDUCTIVE SWITCHING @ 125°C
6
nC
4
RG = 0.6Ω
Eon
UNIT
pF
75
115
35
45
15
31
29
ID = 84A @ 25°C
Turn-off Delay Time
MAX
6480
1540
VDD = 150V
Rise Time
td(off)
TYP
VGS = 10V
Qgs
tr
MIN
µJ
855
VDD = 200V, VGS = 15V
ID = 84A, RG = 5Ω
845
SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS
Symbol
IS
ISM
VSD
dv/
Characteristic / Test Conditions
MIN
TYP
84
Continuous Source Current (Body Diode)
UNIT
Amps
Pulsed Source Current
1
(Body Diode)
336
Diode Forward Voltage
2
(VGS = 0V, IS = -84A)
1.3
Volts
8
V/ns
Peak Diode Recovery
dt
MAX
dv/
dt
5
t rr
Reverse Recovery Time
(IS = -84A, di/dt = 100A/µs)
Tj = 25°C
240
Tj = 125°C
500
Q rr
Reverse Recovery Charge
(IS = -84A, di/dt = 100A/µs)
Tj = 25°C
1.1
Tj = 125°C
5.2
IRRM
Peak Recovery Current
(IS = -84A, di/dt = 100A/µs)
Tj = 25°C
12
Tj = 125°C
22
ns
µC
Amps
THERMAL CHARACTERISTICS
Symbol
Characteristic
MIN
TYP
MAX
0.22
RθJC
Junction to Case
RθJA
Junction to Ambient
40
1 Repetitive Rating: Pulse width limited by maximum junction
temperature
2 Pulse Test: Pulse width < 380 µs, Duty Cycle < 2%
3 See MIL-STD-750 Method 3471
0.9
0.7
0.15
0.5
Note:
PDM
Z JC, THERMAL IMPEDANCE (°C/W)
θ
050-7161 Rev B
7-2004
0.25
0.10
0.3
t1
t2
0.05
Duty Factor D = t1/t2
0.1
0.05
0
10-5
SINGLE PULSE
10-4
°C/W
4 Starting Tj = +25°C, L = 0.71mH, RG = 25Ω, Peak IL = 84A
5 dv/dt numbers reflect the limitations of the test circuit rather than the
device itself. IS ≤ -ID84A di/dt ≤ 700A/µs VR ≤ 300 TJ ≤ 150°C
6 Eon includes diode reverse recovery. See figures 18, 20.
APT Reserves the right to change, without notice, the specifications and inforation contained herein.
0.20
UNIT
Peak TJ = PDM x ZθJC + TC
10-3
10-2
10-1
RECTANGULAR PULSE DURATION (SECONDS)
FIGURE 1, MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs PULSE DURATION
1
Typical Performance Curves
200
RC MODEL
10V
0.0145
Power
(watts)
0.0871
0.120
0.00193F
0.0167F
0.197F
Case temperature. (°C)
ID, DRAIN CURRENT (AMPERES)
Junction
temp. (°C)
APT30M36B2FLL_LFLL
VGS=15V
9V
160
8V
120
7.5V
80
7V
40
6.5V
6V
VDS> ID (ON) x RDS (ON)MAX.
250µSEC. PULSE TEST
@ <0.5 % DUTY CYCLE
200
150
100
50
TJ = +25°C
TJ = +125°C
0
TJ = -55°C
0
2
4
6
8
10
VGS, GATE-TO-SOURCE VOLTAGE (VOLTS)
FIGURE 4, TRANSFER CHARACTERISTICS
90
BVDSS, DRAIN-TO-SOURCE BREAKDOWN
VOLTAGE (NORMALIZED)
70
60
50
40
30
20
10
0
25
50
75
100
125
150
TC, CASE TEMPERATURE (°C)
FIGURE 6, MAXIMUM DRAIN CURRENT vs CASE TEMPERATURE
2.5
D
1.2
VGS=10V
1.1
1.0
VGS=20V
0.9
0.8
0
20
40
60
80 100 120 140 160
ID, DRAIN CURRENT (AMPERES)
FIGURE 5, RDS(ON) vs DRAIN CURRENT
1.15
1.10
1.05
1.00
0.95
0.90
-50
= 42A
GS
= 10V
2.0
1.5
1.0
0.5
0.0
-50
D
1.3
-25
0
25
50 75 100 125 150
TJ, JUNCTION TEMPERATURE (°C)
FIGURE 7, BREAKDOWN VOLTAGE vs TEMPERATURE
1.2
-25
0
25 50
75 100 125 150
TJ, JUNCTION TEMPERATURE (°C)
FIGURE 8, ON-RESISTANCE vs. TEMPERATURE
VGS(TH), THRESHOLD VOLTAGE
(NORMALIZED)
I
V
NORMALIZED TO
= 10V @ I = 42A
GS
1.1
1.0
0.9
0.8
7-2004
ID, DRAIN CURRENT (AMPERES)
V
1.20
80
RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE
(NORMALIZED)
0
5
10
15
20
25
30
VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS)
FIGURE 3, LOW VOLTAGE OUTPUT CHARACTERISTICS
1.4
0.7
0.6
-50
-25
0
25
50
75 100 125 150
TC, CASE TEMPERATURE (°C)
FIGURE 9, THRESHOLD VOLTAGE vs TEMPERATURE
050-7161 Rev B
ID, DRAIN CURRENT (AMPERES)
FIGURE 2, TRANSIENT THERMAL IMPEDANCE MODEL
250
RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE
0
10,000
50
100µS
10
1mS
5
14
VDS= 60V
12
VDS=150V
10
VDS= 240V
8
6
4
2
0
0
40 60 80 100 120 140 160 180
Qg, TOTAL GATE CHARGE (nC)
FIGURE 12, GATE CHARGES vs GATE-TO-SOURCE VOLTAGE
20
80
TJ =+150°C
50
TJ =+25°C
10
5
1
0.3
0.5
0.7
0.9
1.1
1.3
1.5
VSD, SOURCE-TO-DRAIN VOLTAGE (VOLTS)
FIGURE 13, SOURCE-DRAIN DIODE FORWARD VOLTAGE
V
DD
R
G
= 200V
= 5Ω
T = 125°C
tf
J
L = 100µH
V
50
DD
R
G
100
= 200V
tr and tf (ns)
td(on) and td(off) (ns)
100
120
60
= 5Ω
T = 125°C
J
40
L = 100µH
30
td(on)
20
80
tr
60
40
20
10
0
40
60
0
40
100
120
140
ID (A)
FIGURE 14, DELAY TIMES vs CURRENT
80
100
120
140
ID (A)
FIGURE 15, RISE AND FALL TIMES vs CURRENT
DD
R
G
= 5Ω
Eoff
T = 125°C
J
L = 100µH
EON includes
diode reverse recovery.
1000
500
Eon
2500
Eoff
2000
1500
Eon
V
1000
I
60
80
100
120
140
ID (A)
FIGURE 16, SWITCHING ENERGY vs CURRENT
DD
D
= 200V
= 84A
T = 125°C
J
500
0
40
80
= 200V
SWITCHING ENERGY (µJ)
V
1500
60
3000
2000
SWITCHING ENERGY (µJ)
Crss
140
td(off)
70
7-2004
100
0
10
20
30
40
50
VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS)
FIGURE 11,CAPACITANCE vs DRAIN-TO-SOURCE VOLTAGE
200
IDR, REVERSE DRAIN CURRENT (AMPERES)
VGS, GATE-TO-SOURCE VOLTAGE (VOLTS)
= 84A
D
500
10
1
5
10
50 100
300
VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS)
FIGURE 10, MAXIMUM SAFE OPERATING AREA
I
Coss
1,000
10mS
TC =+25°C
TJ =+150°C
SINGLE PULSE
16
050-7161 Rev B
Ciss
5,000
100
1
APT30M36B2FLL_LFLL
20,000
OPERATION HERE
LIMITED BY RDS (ON)
C, CAPACITANCE (pF)
ID, DRAIN CURRENT (AMPERES)
336
0
L = 100µH
E ON includes
diode reverse recovery.
0
5
10 15 20 25 30 35 40 45 50
RG, GATE RESISTANCE (Ohms)
FIGURE 17, SWITCHING ENERGY VS. GATE RESISTANCE
Typical Performance Curves
APT30M36B2FLL_LFLL
90%
10%
Gate Voltage
td(on)
tr
90%
Gate Voltage
T 125°C
J
td(off)
Drain Current
TJ125°C
Drain Voltage
90%
tf
5%
10%
0
5%
10%
Drain Voltage
Drain Current
Switching Energy
Switching Energy
Figure 18, Turn-on Switching Waveforms and Definitions
Figure 19, Turn-off Switching Waveforms and Definitions
APT60DS30
V DS
ID
V DD
G
D.U.T.
Figure 20, Inductive Switching Test Circuit
T-MAXTM (B2) Package Outline
4.69 (.185)
5.31 (.209)
1.49 (.059)
2.49 (.098)
TO-264 (L) Package Outline
4.60 (.181)
5.21 (.205)
1.80 (.071)
2.01 (.079)
15.49 (.610)
16.26 (.640)
19.51 (.768)
20.50 (.807)
3.10 (.122)
3.48 (.137)
5.38 (.212)
6.20 (.244)
5.79 (.228)
6.20 (.244)
Drain
0.40 (.016)
0.79 (.031)
2.21 (.087)
2.59 (.102)
19.81 (.780)
20.32 (.800)
2.87 (.113)
3.12 (.123)
2.29 (.090)
2.69 (.106)
1.65 (.065)
2.13 (.084)
1.01 (.040)
1.40 (.055)
19.81 (.780)
21.39 (.842)
Gate
Drain
Source
0.48 (.019)
0.84 (.033)
2.59 (.102)
3.00 (.118)
5.45 (.215) BSC
2-Plcs.
5.45 (.215) BSC
2-Plcs.
These dimensions are equal to the TO-247 without the mounting hole.
Dimensions in Millimeters and (Inches)
0.76 (.030)
1.30 (.051)
2.79 (.110)
3.18 (.125)
Dimensions in Millimeters and (Inches)
APT’s products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522
5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved.
2.29 (.090)
2.69 (.106)
Gate
Drain
Source
7-2004
4.50 (.177) Max.
25.48 (1.003)
26.49 (1.043)
050-7161 Rev B
Drain
20.80 (.819)
21.46 (.845)