STMicroelectronics BZW06-26 Unidirectional and bidirectional type Datasheet

BZW06
Transil™
Datasheet - production data
Description
Transil diodes provide high overvoltage
protection by clamping action.
Their instantaneous response to transient
overvoltages makes them particularly suited to
protect voltage sensitive devices such as MOS
technology and low voltage supplied IC’s.
Table 1: Order codes
Features






Part number
Marking
BZW06-xxxx
See Table 4.
600 W peak pulse power (10/1000 µs)
Stand-off voltage range 5.8 to 376 V
Unidirectional and bidirectional types
Low clamping factor
Fast response time
UL recognized, file: E136224
April 2017
DocID2972 Rev 4
This is information on a product in full production.
1/9
www.st.com
Characteristics
1
BZW06
Characteristics
Table 2: Absolute maximum ratings (Tamb = 25 °C)
Symbol
Parameter
Value
Peak pulse power
Tj initial = Tamb
600
Power dissipation on infinite heatsink
Tamb = 75 °C
1.7
IFSM
Non repetitive surge peak forward current
tp = 10 ms
Tj initial = Tamb
100
Tstg
Storage junction temperature range
-65 to +175
Tj
Operating junction temperature range
-55 to +175
TL
Maximum temperature for soldering during 10 s at 5 mm from case
Ppp
P
Unit
W
A
°C
260
Figure 1: Electrical characteristics (definitions)
Table 3: Thermal resistances
Symbol
2/9
Parameter
Value
Rth(j-l)
Junction to leads
60
Rth(j-a)
Junction to ambient on printed circuit. Llead = 10 mm
100
DocID2972 Rev 4
Unit
°C/W
BZW06
Characteristics
Table 4: Electrical characteristics (Tamb = 25 °C)
IRM at VRM(1)
VBR at IR(2)
Max.
Min.
VCL at IPP
VCL at IPP
αT(3)
C(4)
Max.
Typ.
10-4/°C
pF
Types (marking)
Max.
Max.
Unidirectional
Bidirectional
µA
V
V
mA
10/1000 µs
BZW06-5V8
BZW06-5V8B
20
5.8
6.45
10
10.5
57.0
13.4
298
5.7
4000
BZW06-6V4
BZW06-6V4B
10
6.4
7.13
10
11.3
53.0
14.5
276
6.1
3700
BZW06-8V5
BZW06-8V5B
1
8.5
9.5
1
14.5
41
18.6
215
7.3
2800
BZW06-10
BZW06-10B
0.2
10
11.4
1
16.7
36.0
21.7
184
7.8
2300
BZW06-13
BZW06-13B
0.2
13
14.3
1
21.2
28.0
27.2
147
8.4
1900
BZW06-15
BZW06-15B
0.2
15
17.1
1
25.2
24.0
32.5
123
8.8
1600
BZW06-19
BZW06-19B
0.2
19
20.9
1
30.6
19.6
39.3
102
9.2
1350
BZW06-20
BZW06-20B
0.2
20
22.8
1
33.2
18.0
42.8
93
9.4
1250
BZW06-23
BZW06-23B
0.2
23
25.7
1
37.5
16.0
48.3
83
9.6
1150
BZW06-26
BZW06-26B
0.2
26
28.5
1
41.5
14.5
53.5
75
9.7
1075
BZW06-28
BZW06-28B
0.2
28
31.4
1
45.7
13.1
59
68
9.8
1000
BZW06-31
BZW06-31B
0.2
31
34.2
1
49.9
12.0
64.3
62
9.9
950
BZW06-33
BZW06-33B
0.2
33
37.1
1
53.9
11.1
69.7
57
10.0
900
BZW06-37
BZW06-37B
0.2
36.8
40.9
1
59.3
10.1
76
53
10.1
850
BZW06-40
BZW06-40B
0.2
40
44.7
1
64.8
9.3
84
48
10.1
800
BZW06-48
BZW06-48B
0.2
48
53.2
1
77.0
7.8
100
40
10.3
700
BZW06-58
BZW06-58B
0.2
58
64.6
1
92.0
6.5
121
33
10.4
625
BZW06-70
BZW06-70B
0.2
70
77.9
1
113
5.3
146
27.0
10.5
550
BZW06-85
BZW06-85B
0.2
85
95.0
1
137
4.4
178
22.5
10.6
500
BZW06-102
BZW06-102B
0.2
102
114
1
165
3.6
212
19.0
10.7
450
BZW06-128
BZW06-128B
0.2
128
143
1
207
2.9
265
15.0
10.8
400
BZW06-154
BZW06-154B
0.2
154
171
1
246
2.4
317
12.6
10.8
360
BZW06-171
BZW06-171B
0.2
171
190
1
274
2.2
353
11.3
10.8
350
BZW06-188
BZW06-188B
0.2
188
209
1
328
1.85
388
10.3
10.8
330
BZW06-213
BZW06-213B
0.2
213
237
1
344
1.75
442
9.0
11.0
310
BZW06-256
BZW06-256B
0.2
256
285
1
414
1.45
529
7.6
11.0
290
BZW06-273
BZW06-273B
0.2
273
304
1
438
1.40
564
7.1
11.0
280
BZW06-299
BZW06-299B
0.2
299
332
1
482
1.25
618
6.5
11.0
271
BZW06-342
BZW06-342B
0.2
342
380
1
548
1.1
706
5.7
11.0
360
BZW06-376
BZW06-376B
0.2
376
418
1
603
1
776
5.7
11.0
350
8/20 µs
Notes:
(1)For
bidirectional types having VRM ≤ 10 V, IRM is multiplied by 2
(2)Pulse
test : tp < 50 ms
(3)To
calculate VBR or VCL versus junction temperature, use the following formulas:
VBR at Tj = VBR at 25 °C x (1 + αT x (Tj - 25))
or
VCL at Tj = VCL at 25 °C x (1 + αT x (Tj - 25))
(4)V
R
= 0 V, F = 1 MHz. For bidirectional types, capacitance value is divided by 2
DocID2972 Rev 4
3/9
Characteristics
1.1
BZW06
Characteristics (curves)
Figure 2: Pulse waveform (10/1000 μs)
% Ipp
10 µs
100
Pulse waveform 10/1000 µs
50
0
t
1000 µs
Figure 3: Peak pulse power dissipation versus
initial junction temperature
PPP(W)
700
Figure 4: Peak pulse power versus exponential
pulse duration
100.0
PPP(kW)
10/1000 µs
Tj initial = 25 °C
600
500
10.0
400
300
1.0
200
100
Tj (°C)
t P(ms)
0
0
25
50
75
100
125
150
175
0.1
1.0E-03
200
Figure 5: Clamping voltage versus peak pulse
current (maximum values).
1000.0
IPP(A)
1.0E-02
1.0E-01
1.0E+00
1.0E+01
Figure 6: Junction capacitance versus reverse
applied voltage (unidirectional types)
C(pF)
10000
Tj initial = 25 °C
8/20 µs
F = 1 MHz
Vosc = 30 mVRMS
Tj = 25 °C
10/1000 µs
BZW06-5V8
10 ms
100.0
1000
BZW06-13
10.0
BZW06-58
100
0.1
1
4/9
10
100
BZW06-376
BZW06-188
BZW06-85
BZW06-58
BZW06-33
BZW06-19
BZW06-5V8
BZW06-10
BZW06-171
1.0
VCL(V)
1000
DocID2972 Rev 4
VR(V)
10
1
10
100
1000
BZW06
Characteristics
Figure 8: Peak forward voltage drop versus peak
forward current
Figure 7: Junction capacitance versus reverse
applied voltage (bidirectional types)
10000
C(pF)
1.0E+02
IFM(A)
F = 1 MHz
Vosc = 30 mVRMS
Tj = 25 °C
1.0E+01
BZW06-5V8B
Tj = 125 °C
1000
BZW06-13B
Tj = 25 °C
1.0E+00
BZW06-58B
100
BZW06-171B
1.0E-01
VFM(V)
VR(V)
10
1
10
100
1000
1.0E-02
0.0
Figure 9: Relative variation of thermal impedance
junction to ambient versus pulse duration
(printed circuit board FR4, eCU = 35 µm)
1.0E+00
Zth(j-a) /Rth(j-a)
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
Figure 10: Leakage current versus junction
temperature
1.E+04
IR(nA)
Recommended pad layout
1.E+03
VR = VRM
VBR < 10 V
1.0E-01
1.E+02
1.E+01
1.0E-02
VR = VRM
VBR > 10 V
1.E+00
t P(s)
1.0E-03
1.0E-02
Tj (°C)
1.E-01
1.0E-01
1.0E+00
1.0E+01
1.0E+02
1.0E+03
DocID2972 Rev 4
25
50
75
100
125
150
5/9
175
Package information
2
BZW06
Package information
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK ®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
2.1
DO-15 package information
Figure 11: DO-15 package outline
Table 5: DO-15 package mechanical data
Dimensions
Ref.
6/9
Millimeters
Inches
Min.
Typ.
Max.
Min.
Typ.
Max.
b
0.71
-
0.88
0.028
-
0.035
D
2.95
-
3.53
0.116
-
0.139
G
6.05
-
6.75
0.238
-
0.266
L
26
-
31
1.024
-
1.22
DocID2972 Rev 4
BZW06
3
Ordering information
Ordering information
Figure 12: Ordering information scheme
BZW 06 - 10 B RL
Peak pulse power
06 = 600W
Stand-off voltage
10 = 10V
Types
No suffix = unidirectional
B = bidirectional
Packaging
Blank = Ammopack
RL = Tape and reel
Table 6: Ordering information
Order code
BZW-06xxxx
BZW-06xxxxRL
Marking(1)
Package
Weight
See Table 4
DO-15
0.4 g
Base qty.
Delivery mode
1000
Ammopack
6000
Tape and reel
Notes:
(1)Marking:
logo, data code, type, cathode band (for unidirectional types only)
DocID2972 Rev 4
7/9
Revision history
4
BZW06
Revision history
Table 7: Document revision history
Date
Revision
Feb-2003
3A
06-Apr-2017
8/9
4
Changes
Last update.
Updated Table 2: "Absolute maximum ratings (Tamb = 25 °C)",
Table 4: "Electrical characteristics (Tamb = 25 °C)", Section 5.1:
"Characteristics (curves)" and Section 6.1: "DO-15 package
information".
DocID2972 Rev 4
BZW06
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST
products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the
design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2017 STMicroelectronics – All rights reserved
DocID2972 Rev 4
9/9
Similar pages