Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 1312271024 Item: DIL12-2A66-24L DIL12-2A71-24L Coil Data at 20 °C Conditions Min Typ Max Unit Conditions Min Typ Max Unit Coil resistance Coil voltage Rated power Pull-In voltage Drop-Out voltage Contact data 71 Contact-No. Contact-form Contact-material Contact rating Switching voltage Switching current Carry current Contact resistance static Contact resistance dynamic Insulation resistance Breakdown voltage Operate time incl. bounce Release time Special Product Data Insulation resistance Coil/Contact Insulation voltage Coil/Contact Housing material Connection pins Environmental data Shock Vibration Ambient temperature Storage temperature 71 A Ruthenium not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC ! "# Start Value & % ' Start Value $ % !"! % ! & RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation ) Conditions ( Min Typ Max RH <45%, 200 VDC test voltage according to IEC 255-5 Unit ( * PBT glass fibre reinforced Copper alloy tin plated Conditions Min Typ 1/2 sine wave duration 11ms from 10 - 2000 Hz Max Unit + + , , - Modifications in the sense of technical progress are reserved Designed at: 16.03.06 Designed by: WKOVACS Approval at: Last Change at: 16.03.06 Last Change by: WKOVACS Approval at: 28.10.08 Approval by: RUDI RIPPL Approval by: KOLBRICH Version: 01 Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 1312271024 Item: DIL12-2A66-24L DIL12-2A71-24L Environmental data Soldering temperature Cleaning Conditions Min wave soldering max. 5 sec Typ fully sealed Max Unit , Modifications in the sense of technical progress are reserved Designed at: 16.03.06 Designed by: WKOVACS Approval at: Last Change at: 16.03.06 Last Change by: WKOVACS Approval at: 28.10.08 Approval by: RUDI RIPPL Approval by: KOLBRICH Version: 01