GE B80C800DM Miniature glass passivated single-phase bridge rectifier Datasheet

B40C800DM THRU B380C800DM
MINIATURE GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER
Reverse Voltage - 65 to 600 Volts Forward Current - 0.9 Ampere
FEATURES
Case Style DFM
♦ Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
♦ Glass passivated chip junctions
♦ Surge overload rating of
45 Amperes peak
♦ Ideal for printed circuit boards
♦ High temperature soldering guaranteed:
260°C/10 seconds at 5 lbs. (2.3kg) tension
0.255 (6.5) 0.315 (8.00)
0.245 (6.2) 0.285 (7.24)
0.335 (8.51)
0.320 (8.12)
0.130 (3.3)
0.120 (3.05)
MECHANICAL DATA
0.080 (2.03)
0.050 (1.27)
0.045 (1.14)
0.035 (0.89)
0.185 (4.69)
0.150 (3.81)
0.023 (0.58)
0.018 (0.46)
0.350 (8.9)
0.300 (7.6)
0.075 (1.90)
0.055 (1.39)
0.205 (5.2)
0.195 (5.0)
0.013 (3.3)
0.0086 (0.22)
Dimensions in inches and (millimeters)
Case: Molded plastic body over passivated junctions
Terminals: Plated leads solderable per MIL-STD-750,
Method 2026
Polarity: Polarity symbols marked on body
Mounting Position: Any
Weight: 0.04 ounce, 1.0 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS
B40
C800DM
B80
C800DM
B125
C800DM
B250
C800DM
B380
C800DM
UNITS
Maximum repetitive peak reverse voltage
VRRM
65
125
200
400
600
Volts
Maximum RMS input voltage R + C-load
VRMS
40
80
125
250
380
Volts
Maximum average forward output current for
R + L-load
free air operation at TA=45°C
C-load
I(AV)
Maximum DC blocking voltage
VDC
65
125
200
400
600
Volts
Maximum peak working voltage
VRWM
90
180
300
600
900
Volts
100
200
350
650
1000
0.9
0.8
Amp
Volts
Maximum non-repetitive peak voltage
VRSM
Maximum repetitive peak forward surge current
IFRM
10.0
Amps
Peak forward surge current
single sine wave on rated load at TJ=125°C
IFSM
45.0
Amps
Rating for fusing at TJ=125°C (t<100ms)
I2t
10.0
A2sec
Minimum series resistor C-load at VRMS = ±10%
RT
1.0
2.0
4.0
8.0
12.0
Ohms
+50%
-10%
CL
5000
2500
1000
500
200
µF
Maximum instantaneous forward voltage drop
per leg at 0.9A
VF
1.0
Volts
Maximum reverse current at rated repetitive
peak voltage per leg
IR
10.0
µA
RΘJA
RΘJL
40.0
15.0
°C/W
TJ
-40 to +125
°C
TSTG
-40 to +150
°C
Maximum load capacitance
Typical thermal resistance per leg (NOTE 1)
Operating junction temperature range
Storage temperature range
NOTES: (1) Thermal resistance from junction to ambient and from junction to lead P.C.B. mounted on 0.5 x 0.5" (13 x 13mm)
copper pads
4/98
RATINGS AND CHARACTERISTICS CURVES B40C800DM THRU B380C800DM
1.0
FIG. 2 - DERATING CURVE OUTPUT RECTIFIED
CURRENT FOR B250C800DM...B380C800DM
50 to 60 HZ
RESISTIVE OR
INDUCTIVE LOAD
AVERAGE FORWARD OUTPUT CURRENT
AMPERES
AVERAGE FORWARD OUTPUT CURRENT,
AMPERES
FIG.1 - DERATING CURVE OUTPUT RECTIFIED
CURRENT FOR B40C800DM...B125C800DM
0.8
CAPACITIVE LOAD
0-10µF
10-100µF
>100µF
0.6
0.4
MOUNTED ON P.C.B.
WITH 0.06” (1.5mm) LEAD LENGTH
0.2
COPPER PADS
0.51 x 0.51” (13 x 13mm)
0
0
20
40
60
80
100
120
1.0
50 to 60 HZ
RESISTIVE OR
INDUCTIVE LOAD
0.8
CAPACITIVE LOAD
0-10µF
10-100µF
>100µF
0.6
0.4
0.2
P.C.B. MOUNTED ON
0.51 x 0.51” (13 x 13mm) COPPER PADS
WITH 0.06” (1.5mm) LEAD LENGTH
0
140
0
AMBIENT TEMPERATURE, °C
20
40
60
80
100
120 140
AMBIENT TEMPERATURE, °C
FIG. 4 - TYPICAL FORWARD CHARACTERISTICS
PER LEG
TJ=125°C
10ms SINGLE SINE-WAVE
40
30
1.0 CYCLE
20
10
0
0
10
100
10
INSTANTANEOUS FORWARD SURGE CURRENT,
AMPERES
50
TJ=25°C
PULSE WIDTH=300µs
1% DUTY CYCLE
1
0.1
NUMBER OF CYCLES AT 50 HZ
0.01
0.4
0.6
0.8
1.0
1.2
1.4
INSTANTANEOUS FORWARD VOLTAGE,
VOLTS
FIG. 6 - TYPICAL JUNCTION CAPACITANCE
PER LEG
FIG. 5 - TYPICAL REVERSE LEAKAGE
CHARACTERISTICS PER LEG
100
10
JUNCTION CAPACITANCE, pF
INSTANTANEOUS REVERSE CURRENT,
MICROAMPERES
PEAK FORWARD SURGE CURRENT,
AMPERES
FIG. 3 - MAXIMUM NON-REPETITIVE PEAK FORWARD
CURRENT PER LEG
TJ=100°C
1
0.1
0.01
0
TJ=25°C
20
40
60
80
PERCENT OF RATED PEAK REVERSE
VOLTAGE, %
100
TJ=25°C
f=1.0 MHz
Vsig=50mVp-p
10
1
1
10
REVERSE VOLTAGE,VOLTS
100
Similar pages