Amphenol CC2D23-SIP Fully calibrated & temperature compensated Datasheet

®
ChipCap 2-SIP
®
Humidity and Temperature
Sensor
Description
Features
ChipCap 2-SIP by Telaire is a Single In-Line
Package type of ChipCap with ready installed
V-Core capacitor for easy and convenient
application.
• Fully Calibrated & Temperature Compensated
• Digital (I2C) Output
• Precision and Accuracy (±2%RH, ±0.3°C, 14 bit )
• Free Operating Voltage (min 2.3V to max 5.5V)
ChipCap offers the most advanced and cost
effective humidity and temperature sensing solution
for virtually any type of applications. Capacitive
polymer sensor chip developed and fabricated inhouse and CMOS integrated circuit with EEPROM
are integrated into one embedded system.
• Low Current Consumption
Individually calibrated and tested, ChipCap 2-SIP
performs ±2% from 20% to 80%RH (±3% over
entire humidity range), and yet is simple and ready
to use without further calibration or temperature
compensation.
•
ChipCap 2-SIP offers another sensible sensing
solution for excellent reliability, high accuracy, and
cost effective sensing applications.
• SIP (Single-In-line-Package)
• Reliable in Harsh Environment
• Eliminates the reconditioning procedure needed
for surface mount RH sensors
Field replaceable.
• Allows better air circulation and response time
Applications
• Energy Saving HVAC Control: Air Conditioning,
Refrigeration, IAQ monitoring, Vent Fans, Home
Appliances, Humi/Dehumidifiers
• Process Control and Instrumentation: Sensor
Performance
• Medical Instruments, Handheld Devices, Weather
Stations, Food Processing, Printers, RFIDs
• Automobile & Transportation Cabin Climate
Control, Defogging Control, Condensing
Preventive Devise
• Mass Quantity Application: OEM custom
specification available
Amphenol
Advanced Sensors
Sensor Performance
Temperature (°C)
Relative Humidity (RH%)
* Custom Accuracy Tolerance Available
Resolution
14 bit (0.01°C)
Resolution
14 bit (0.01%RH)
Accuracy³
±0.3°C (Figure 2)
Accuracy¹
±2.0%RH (20~80%RH)*
Repeatability
±0.1°C
Repeatability
±0.2 %RH
Response time
5.0 sec (63%)
Hysteresis
±2.0 %RH
Operating range
- 40 ~ 125 °C
Linearity
<2.0 %RH
Long term drift
Response time²
7.0 sec (63%)
<0.05 °C/yr (Normal
condition)
Temp Coefficient
Max 0.13 %RH/°C
(at 10~60°C, 10~90%RH)
Operating range
0 ~ 100 %RH (NonCondensing)
Long term drift
<0.5 %RH/yr (Normal condition)
1. Accuracies measured at 25°C, 5.0V.
2. Measured at 25°C, 1m/sec airflow for achieving 63% of step from
33%RH to 90%RH
3. Accuracies measured at 25, 5.0V.
4. Min 5.0 sec, Max 20 sec
Figure 1. Typical RH% Accuracy at 25°C
Figure 2. Typical Temperature Accuracy
Dimensions
Electrical Specification
Environmental
Supply Voltage*1
1 min 2.3V ~ max 5.5V
Operating Temperature
- 40 ~ 125°C
Supply Current (IDD)
750 µA (typical)
Operating Humidity
Sleep Current (Isleep)*2
0.6 µA (typical)
0~100%RH (non
condensing)
*1. Lower than 2.7V supply voltage may increase
the accuracy tolerance of the Temperature.
*2. At -40 ~85°C
Absolute Maximum Rating
Pin Connection
Parameter
Min
Max
Supply Voltage
(VDD)
-0.3V
6.0V
Storage Temp
-55°C
150°C
Junction Temp
-55°C
150°C
Soldering Information
Standard or IR Solder Reflow.
Tp: 260°C, tp: 40 sec. (qualify Pb free profile)For
manual soldering, contact time should not exceed 4
seconds at up to 350°C.
Shipping
Tray :
Inner Box :
Out Box :
*.Chip on Board is 100 nF capacitor for Vcore.
Package Contents
ChipCap® 2-SIP consists of a ChipCap 2 and a
V-core capacitor soldered on the top of a FR4
substrate. Lead Pins are made of Cu, Sn, P alloy
and all parts are fully RoHS and REACH compliant.
Ordering Information
Output
Accuracy
VVD
Mode
Part Number
I2C
2%
3.3 V
Update
CC2D23-SIP
I2C
2%
5V
Update
CC2D25-SIP
I2C
2%
3.3 V
Sleep
CC2D23S-SIP
I2C
2%
5V
Sleep
CC2D25S-SIP
I2C
3%
3.3 V
Update
CC2D33-SIP
I2C
3%
5V
Update
CC2D35-SIP
I2C
3%
3.3 V
Sleep
CC2D33S-SIP
I2C
3%
5V
Sleep
CC2D35S-SIP
100 ea
500 ea
5,000 ea
Standard Digital (I²C ) Output :
Factory setting is Sleep Mode and calibrated at
3.3V.
Amphenol
Advanced Sensors
www.telaire.com
www.amphenol-sensors.com
© 2016 Amphenol Corporation. All Rights Reserved. Specifications are subject to change without notice.
Other company names and product names used in this document are the registered trademarks or
trademarks of their respective owners.
AAS-920-628B-02/2016
Similar pages