Click on Series name for product info on aimtec.com Series AME15-MAZ 15 Watt | AC-DC / DC-DC Converter FEATURES: 4000VAC I/O Isolation Operating temperature: -40 to +85°C Over load, Over Voltage, Short Circuit Protection Universal input: 90-264VAC, 47-440Hz RoHS compliant Soft start Energy Star compliant CE, cULus, CB approvals CB Models Single output Model AME15-3.3SMAZ AME15-5SMAZ AME15-12SMAZ AME15-15SMAZ AME15-24SMAZ Input Voltage (VAC/Hz) 90-264/47-440 90-264/47-440 90-264/47-440 90-264/47-440 90-264/47-440 Input voltage (VDC) Output Voltage (V) 130-370 130-370 130-370 130-370 130-370 Output Current max (A) 3.3 5 12 15 24 Maximum capacitive Load (µF) 3 3 1.25 1 0.63 4700 2200 1000 680 470 Efficiency (%) 115 230 VAC VAC 73 76 78 79 82 73 78 79 82 84 Models Dual output Model AME15-5DMAZ AME15-12DMAZ AME15-15DMAZ Input Voltage (VAC/Hz) 90-264/47-440 90-264/47-440 90-264/47-440 Input voltage (VDC) Output Voltage (V) 130-370 130-370 130-370 Output Current Maximum max (A) Capacitive Load (µF) ±5 ±12 ±15 ±1.5 ±0.63 ±0.5 ±1000 ±470 ±330 Efficiency (%) 115 230 VAC VAC 78 81 82 79 82 83 Input Specifications Parameters Current Inrush current <2ms (Cold Start) Leakage current External Fuse (recommend) Input Dissipation Under Voltage Protection Start-up time Conditions Typical 115 VAC 230 VAC 115 VAC 230 VAC 115 VAC 264 VAC slow blow type 110/230Vac Maximum Units 350 180 20 30 0.1 0.2 mA mA A A mA mA A W VAC ms Maximum Units 2 0.2 85 350 Output Specifications Parameters Conditions Typical Voltage accuracy Line regulation Load regulation (single) Cross regulation (dual) Transient Recovery Time Transient Response Deviation ±2 LL-HL ±1 0-100% ±1 25% load - 1st out, 100% load – 2nd out ±5 300 25% load step ±2 75 3.3 / 5V Models 12 / 15V Models Ripple & Noise* 100 24V 150 Hold-up time min 20 * Ripple and Noise are measured at 20MHz bandwidth by using a 0.1μF (M/C) and 47μF (E/C) parallel capacitor www.aimtec.com F 052e R8.O Tel: +1 514 620 2722 1 of 4 % % % % µs % of Vout mVp-p ms Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AME15-MAZ 15 Watt | AC-DC / DC-DC Converter Isolation Specifications Parameters Conditions Tested I/O voltage Isolation resistance Typical 60 sec Rated Units 4000 VAC MΩ Maximum Units >1000 General Specifications Parameters Switching frequency Protection class Over load protection Over voltage protection Short Circuit protection Short Circuit restart Operating temperature Storage temperature Max Case temperature Temperature coefficient Cooling Humidity Weight Dimensions (L x W x H) Conditions Typical 132 Class II 130 Zener diode clamp Continuous Auto recovery -40 to +85 -40 to +100 Fold Back With derating over 55 oC KHz % oC oC 100 ±0.02 Free air convection oC % / oC 95 % RH 100 g 2.56 x 1.83 x 0.79 inches 65.0 x 46. 5 x 20.1 mm , ±0.5mm > 400,000hrs (MIL-HDBK -217F, t=+25oC) MTBF > 100,000hrs (MIL-HDBK -217F, t=at highest operating temperature) Case material Plastic (flammability to UL 94V-0) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Environment Approval Parameters Shock Vibrations Conditions Wave form: Half sine wave Acceleration amplitude: 5gn Bump duration: 30 ms Number of bumps: 18 (3 in each direction for every axis) Converter operation before and after test, body mounted (on chassis) Test mode: Sweep sine 10-100Hz, speed 0.05Hz/s Displacement: 1mm Acceleration: 3g 3 loops 30min one cycle, 3h total, every axis tested Converter operation before and after test, body mounted (on chassis) Safety & EMC Specifications Parameters Agency approvals cULus, CE, CB Medical Electrical Equipment Standards www.aimtec.com F 052e R8.O Information technology Equipment EMI - Conducted and radiated emission Harmonic Current Emissions Voltage fluctuations and flicker Electrostatic Discharge Immunity RF, Electromagnetic Field Immunity Electrical Fast Transient/Burst Immunity Surge Immunity RF, Conducted Disturbance Immunity Power frequency Magnetic Field Immunity Voltage dips, Short Interruptions Immunity Tel: +1 514 620 2722 2 of 4 IEC\EN\UL 60601-1, 2 x MOOP,CSA-C22.2 No. 601.1-M90 EN 60950-1:2006+A11:2009 EN55011, class B IEC/EN 61000-3-2, Class A IEC/EN 61000-3-3, (EN60555-3) IEC 61000-4-2 Level 3 IEC 61000-4-3 Level 2 IEC 61000-4-4 Level 3 IEC 61000-4-5 Level 3 IEC 61000-4-6 Level 2 IEC 61000-4-8 Level 2 IEC 61000-4-11 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AME15-MAZ 15 Watt | AC-DC / DC-DC Converter Pin Out Specifications Pin Single Dual 1 2 3 4 5 6 No pin AC Input (N) AC Input (L) -V Output No pin +V Output No pin AC Input (N) AC Input (L) -V Output Common +V Output Dimensions (Top View) ‐ Case temperature Measurement www.aimtec.com F 052e R8.O Tel: +1 514 620 2722 3 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AME15-MAZ 15 Watt | AC-DC / DC-DC Converter Derating NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 052e R8.O Tel: +1 514 620 2722 4 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only