AVT-53663 DC – 6000 MHz InGaP HBT Gain Block Data Sheet Description Features Avago Technologies’ AVT-53663 is an economical, easyto-use, general purpose InGaP HBT MMIC gain block amplifier utilizing Darlington pair configuration housed in a 6-lead (SOT-363) surface mount plastic package. Small signal gain amplifier The Darlington feedback structure provides inherent broad bandwidth performance, resulting in useful operating frequency up to 6 GHz. This is an ideal device for small-signal gain cascades or IF amplification. AVT-53663 is fabricated using advanced InGaP HBT (Hetero-junction Bipolar Transistor) technology that offers state-of-the-art reliability, temperature stability and performance consistency. Operating frequency DC to 6 GHz Unconditionally stable 50 Ohm input & output Flat, Broadband Frequency Response up to 2 GHz Industry standard SOT-363 Lead-free, RoHS compliant, Green Specifications 2 GHz, 5V Vcc, 48mA (typical) 19.5 dB Gain 15.1 dBm P1dB Component Image 26.5 dBm OIP3 Notes: Output Package marking provides & Vd orientation and identification “53” = Device Code GND “X” = Month of Manufacture “” = Pin 1 GND 53X GND GND Input WiMAX / WiBRO CATV & Cable modem ISM VCC = 5V RFin Pin 3 Applications Wireless Data / WLAN Typical Biasing Configuration Cblock 10 dB IRL and ORL Cellular / PCS / 3G base station Top View Rbias Cbyp 3.2 dB NF Cbyp Rbias = (VCC - Vd)/Id Pin 6 RFout Vd C block Pin 1, 2, 4, 5 (GND) Attention: Observe precautions for handling electrostatic sensitive devices. ESD Machine Model = 160 V ESD Human Body Model = 2000 V Refer to Avago Application Note A004R: Electrostatic Discharge, Damage and Control. Absolute Maximum Rating[1] TA=25°C Thermal Resistance Symbol Parameter Units Absolute Max. Id Device Current mA 80 PIN,MAX CW RF Input Power dBm 18 PDISS Total Power Dissipation [3] mW 327 TOPT Operating Temperature °C -40 to 85 TJ,MAX Junction Temperature °C 150 TSTG Storage Temperature °C -65 to 150 Thermal Resistance [2] jc = 184°C/W (Id = 48 mA, Tc = 85°C) Notes: 1. Operation of this device in excess of any of these limits may cause permanent damage. 2. Thermal resistance measured using Infrared measurement technique. 3. Ground lead temperature is 25°C. Derate 5.5mW/°C for Tc >90°C. Electrical Specifications [1] TA = 25°C, Zo = 50 , VCC = 5 V, Rbias = 22 , Pin = -15 dBm (unless specified otherwise) Symbol Parameter and Test Condition Id Device Current Gp Power Gain OIP3 [2] Output 3rd Intercept Point Frequency Units Min. Typ. Max. mA 44.0 47.6 51.0 18.0 21.8 19.5 21.0 25.0 28.9 26.5 900 MHz 2000 MHz dB 900 MHz 2000 MHz dBm S11 Input Return Loss, 50 source 900 MHz 2000 MHz dB -16.5 -12.0 S22 Output Return Loss, 50 load 900MHz 2000 MHz dB -17.3 -13.4 S12 Reverse Isolation 900 MHz 2000 MHz dB -24.3 -24.7 P1dB Output Power at 1dB Gain Compression 900 MHz 2000 MHz dBm 16.0 15.1 NF Noise Figure 900 MHz 2000 MHz dB 2.9 3.2 Notes: 1. Measurements obtained on CPWG line with reference plane at the ends of DUT leads (as shown in Figure 1). 2. OIP3 test condition: FRF1 - FRF2 = 10MHz with input power of -23 dBm per tone measured at worse side band. 2 VCC Rbias Bias Tee RFin Pin 6 Zo = 50 Ohm RFout Zo = 50 Ohm Pin 3 Pin 1, 2, 4, 5 (GND) Figure 1. Block diagram of board used for Id, Gain, OIP3, S11, S22, S12, OP1dB and NF measurements. Circuit losses have been de-embedded from actual measurements. Product Consistency Distribution Charts at 2 GHz, Vcc = 5 V, Rbias = 22 LSL 43 44 LSL USL 45 46 47 48 49 50 51 18 Figure 2. Id (mA) distribution. LSL = 44.5, Nominal = 47.6, USL = 50.5 USL 19 20 21 Figure 3. Gain (dB) distribution. LSL = 18, Nominal = 19.5, USL = 21 LSL Notes: 1. Statistical distribution determined from a sample size of 1500 samples taken from 3 different wafers from 2 wafer lots, measured on a production test board. 2. Future wafers allocated to this product may have typical values anywhere between the minimum and maximum specification limits. 25 26 27 Figure 4. OIP3 (dBm) distribution. LSL = 25.5, Nominal = 26.6 3 28 AVT-53663 Typical Performance Curves TA = 25°C, Zo = 50 , Pin = -15 dBm (unless specified otherwise) 24 22 P1dB (dBm) Gain (dB) 20 18 16 14 12 10 0 1 2 3 4 Frequency (GHz) 5 6 Figure 5. Gain vs Frequency at Id = 48mA 17 16 15 14 13 12 11 10 9 8 7 6 5 0 1 2 3 4 Frequency (GHz) 5 6 5 6 Figure 6. P1dB vs Frequency at Id = 48mA 31 6 29 5 25 NF (dB) OIP3 (dBm) 27 23 21 19 0 1 2 3 4 Frequency (GHz) 5 6 Figure 7. OIP3 vs Frequency at Id = 48mA, Pin = -23dBm 25°C 85°C -40°C 70 Id (mA) 60 50 40 30 20 10 0 1 2 Figure 9. Id vs Vd and Temperature 4 3 Vd (V) 4 1 0 1 2 3 4 Frequency (GHz) Figure 8. NF vs Frequency at Id = 48mA 80 0 3 2 17 15 4 5 6 AVT-53663 Typical Performance Curves TA = 25°C, Zo = 50 , Pin = -15 dBm (unless specified otherwise), continued 20 22 15 Gain (dB) P1dB (dBm) 23 21 10 25°C 85°C -40°C 20 20 30 40 50 Id (mA) 60 70 25°C 85°C -40°C 5 80 Figure 10. Gain vs Id and Temperature at 900 MHz 20 40 50 Id (mA) 60 70 80 70 80 Figure 11. P1dB vs Id and Temperature at 900 MHz 35 4.0 25°C 85°C -40°C 3.5 30 NF(dB) OIP3 (dBm) 30 3.0 25 20 2.5 25°C 85°C -40°C 20 30 40 50 Id (mA) 60 70 2.0 80 Figure 12. OIP3 vs Id and Temperature at 900 MHz, Pin = -23dBm 20 30 40 50 Id (mA) 60 Figure 13. NF vs Id and Temperature at 900 MHz 20 20 15 Gain (dB) P1dB (dBm) 21 19 10 25°C 85°C -40°C 18 20 30 40 50 Id (mA) Figure 14. Gain vs Id and Temperature at 2 GHz 5 60 70 25°C 85°C -40°C 80 5 20 30 40 50 Id (mA) Figure 15. P1dB vs Id and Temperature at 2 GHz 60 70 80 AVT-53663 Typical Performance Curves TA = 25°C, Zo = 50 , Pin = -15 dBm (unless specified otherwise), continued 35 4.5 25°C 85°C -40°C 4.0 30 NF(dB) OIP3 (dBm) 25°C 85°C -40°C 25 3.5 3.0 2.5 20 20 30 40 50 Id (mA) 60 70 Figure 16. OIP3 vs Id and Temperature at 2 GHz, Pin = -23dBm 24 16 4.0 14 70 80 0.05 0.9 2.0 2.5 3.0 4.0 10 5.0 6.0 5 20 30 40 50 Id (mA) 60 70 0 80 20 30 40 50 Id (mA) 60 70 80 Figure 19. P1dB vs Id and Frequency (GHz) 40 6.0 0.05 35 0.9 30 2.0 2.5 3.0 4.0 5.0 6.0 25 20 15 6.0 5.5 NF (dB) OIP3 (dBm) 60 6.0 Figure 18. Gain vs Id and Frequency (GHz) 5.0 5.0 4.5 4.0 4.0 3.0 2.5 2.0 0.9 0.05 3.5 3.0 2.5 20 30 40 50 Id (mA) 60 Figure 20. OIP3 vs Id and Frequency (GHz), Pin = -23dBm 6 50 Id (mA) 5.0 10 10 40 15 12 8 30 20 P1dB (dBm) 18 2.0 2.5 3.0 20 20 Figure 17. NF vs Id and Temperature at 2 GHz 0.05 0.9 22 Gain (dB) 2.0 80 70 80 2.0 20 30 40 50 Id (mA) Figure 21. NF vs Id and Frequency (GHz) 60 70 80 AVT-53663 Typical Performance Curves 0 0 -5 -5 -10 -10 S22 (dB) S11 (dB) TA = 25°C, Zo = 50 , Pin = -15 dBm (unless specified otherwise), continued -15 -20 -20 Id=30mA Id=48mA Id=60mA -25 -30 0 2 4 6 Frequency (GHz) Figure 22. S11 vs Frequency and Id 7 -15 8 Id=30mA Id=48mA Id=60mA -25 10 -30 0 2 4 6 Frequency (GHz) Figure 23. S22 vs Frequency and Id 8 10 AVT-53663 Typical Scattering Parameters TA = 25°C, Zo = 50 , Id = 30 mA, (unless specified otherwise) Frequency GHz S11 S21 S12 S22 Mag Angle dB Mag Angle Mag Angle Mag Angle K 0.05 0.14 0.3 21.8 12.35 177.2 0.07 -0.9 0.17 -2.3 1.0 0.1 0.14 0.5 21.8 12.33 174.6 0.07 -1.4 0.17 -5.2 1.0 0.5 0.16 -3.1 21.5 11.95 153.6 0.06 -5.9 0.17 -27.2 1.0 0.9 0.19 -13.0 21.1 11.35 133.4 0.06 -10.1 0.19 -48.1 1.0 1.5 0.25 -32.7 20.2 10.25 104.4 0.06 -15.9 0.23 -79.5 1.1 2.0 0.28 -50.1 19.3 9.26 81.5 0.06 -20.4 0.26 -104.2 1.1 2.5 0.30 -69.3 18.3 8.27 59.8 0.06 -24.3 0.28 -125.7 1.2 3.0 0.31 -89.6 17.3 7.33 39.3 0.06 -27.7 0.30 -144.4 1.2 3.5 0.33 -110.5 16.2 6.47 19.7 0.06 -30.7 0.32 -161.8 1.3 4.0 0.34 -131.5 15.1 5.69 0.7 0.06 -33.4 0.34 -179.0 1.4 4.5 0.35 -152.0 13.9 4.97 -17.5 0.06 -36.0 0.37 164.0 1.4 5.0 0.37 -172.0 12.7 4.30 -35.1 0.06 -38.6 0.39 148.2 1.5 5.5 0.39 168.8 11.4 3.71 -51.9 0.06 -41.3 0.42 133.3 1.6 6.0 0.40 150.6 10.1 3.19 -67.9 0.06 -44.5 0.46 118.8 1.6 6.5 0.42 133.4 8.7 2.73 -83.1 0.06 -48.2 0.49 105.5 1.7 7.0 0.44 117.5 7.4 2.34 -97.4 0.07 -52.3 0.52 93.7 1.7 7.5 0.46 103.1 6.1 2.02 -110.8 0.07 -56.8 0.55 83.4 1.8 8.0 0.49 89.5 4.8 1.74 -123.5 0.07 -61.8 0.56 73.8 1.8 8.5 0.50 76.1 3.6 1.52 -135.9 0.08 -67.6 0.58 64.2 1.9 9.0 0.52 62.3 2.4 1.32 -148.2 0.08 -74.2 0.59 53.7 2.0 9.5 0.54 48.5 1.1 1.14 -160.4 0.08 -81.4 0.60 42.4 2.1 10.0 0.56 35.9 -0.2 0.98 -172.2 0.09 -88.9 0.62 30.7 2.3 10.5 0.58 25.1 -1.6 0.83 176.7 0.09 -96.2 0.64 19.1 2.4 11.0 0.60 16.1 -3.1 0.70 166.6 0.09 -103.0 0.67 8.8 2.6 11.5 0.62 8.1 -4.6 0.59 157.6 0.08 -109.3 0.70 0.0 2.8 12.0 0.64 0.4 -6.1 0.50 149.2 0.08 -115.2 0.73 -7.6 3.0 12.5 0.66 -7.6 -7.4 0.43 141.2 0.08 -121.3 0.74 -14.3 3.2 13.0 0.67 -16.1 -8.7 0.37 133.1 0.08 -127.8 0.75 -20.9 3.5 13.5 0.68 -25.4 -9.8 0.32 124.8 0.08 -135.0 0.75 -28.2 3.9 14.0 0.70 -35.4 -10.9 0.29 115.9 0.09 -143.0 0.74 -37.2 4.4 14.5 0.71 -45.6 -12.0 0.25 106.7 0.09 -151.6 0.74 -47.8 5.0 15.0 0.72 -55.3 -13.3 0.22 97.8 0.08 -160.3 0.74 -59.0 5.5 16.0 0.75 -70.1 -16.1 0.16 83.7 0.08 -174.3 0.78 -76.4 6.6 17.0 0.76 -80.6 -18.9 0.11 76.4 0.07 176.4 0.82 -84.6 7.7 18.0 0.77 -89.5 -21.1 0.09 73.0 0.07 168.7 0.84 -89.0 9.2 19.0 0.78 -99.2 -22.8 0.07 68.3 0.07 158.4 0.82 -98.8 12.0 20.0 0.80 -113.4 -24.7 0.06 59.8 0.07 142.7 0.80 -118.2 16.2 Notes: 1. S-parameters are measured on a CPWG line fabricated on 0.025 inch thick Rogers® RO4350 material. The input reference plane is at the end of the input lead. The output reference plane is at the end of the output lead. 8 AVT-53663 Typical Scattering Parameters TA = 25°C, Zo = 50 , Id = 48 mA, (unless specified otherwise) Frequency GHz S11 S21 S12 S22 Mag Angle dB Mag Angle Mag Angle Mag Angle K 0.05 0.08 1.9 22.6 13.46 177.2 0.06 -0.1 0.11 -2.3 1.0 0.1 0.08 4.9 22.6 13.43 174.5 0.06 -1.0 0.11 -5.8 1.0 0.5 0.10 9.3 22.3 12.98 153.1 0.06 -5.3 0.11 -29.6 1.0 0.9 0.15 -0.6 21.8 12.28 132.5 0.06 -9.3 0.14 -51.6 1.0 1.5 0.22 -24.0 20.8 11.00 103.2 0.06 -14.8 0.18 -84.0 1.1 2.0 0.25 -43.0 19.9 9.86 80.3 0.06 -19.0 0.21 -108.9 1.1 2.5 0.27 -63.4 18.8 8.74 58.7 0.06 -22.8 0.24 -130.0 1.2 3.0 0.29 -84.8 17.7 7.71 38.3 0.06 -26.0 0.27 -148.0 1.2 3.5 0.30 -106.7 16.6 6.78 18.9 0.06 -28.8 0.30 -164.9 1.3 4.0 0.32 -128.5 15.5 5.95 0.1 0.06 -31.3 0.32 178.3 1.4 4.5 0.33 -149.6 14.3 5.19 -18.0 0.06 -33.7 0.35 161.5 1.4 5.0 0.35 -170.2 13.1 4.49 -35.5 0.06 -36.1 0.38 146.0 1.5 5.5 0.37 170.1 11.8 3.87 -52.1 0.06 -38.7 0.41 131.4 1.6 6.0 0.39 151.6 10.4 3.33 -68.1 0.06 -41.9 0.45 117.1 1.6 6.5 0.41 134.2 9.1 2.86 -83.2 0.06 -45.7 0.49 104.0 1.6 7.0 0.43 118.1 7.8 2.45 -97.5 0.07 -50.0 0.52 92.4 1.7 7.5 0.45 103.4 6.5 2.11 -110.9 0.07 -54.8 0.54 82.1 1.7 8.0 0.48 89.8 5.2 1.82 -123.6 0.07 -60.0 0.56 72.6 1.7 8.5 0.49 76.3 4.0 1.59 -136.0 0.08 -66.0 0.57 63.0 1.8 9.0 0.51 62.4 2.8 1.38 -148.4 0.08 -72.8 0.58 52.6 1.9 9.5 0.53 48.6 1.5 1.19 -160.6 0.09 -80.3 0.60 41.3 2.0 10.0 0.55 36.0 0.2 1.02 -172.4 0.09 -87.9 0.62 29.6 2.2 10.5 0.58 25.2 -1.2 0.87 176.6 0.09 -95.4 0.64 18.2 2.3 11.0 0.60 16.1 -2.7 0.73 166.5 0.09 -102.3 0.67 8.0 2.5 11.5 0.62 8.1 -4.2 0.62 157.4 0.09 -108.7 0.70 -0.7 2.7 12.0 0.63 0.4 -5.6 0.52 148.9 0.09 -114.7 0.73 -8.2 2.9 12.5 0.65 -7.6 -7.0 0.45 140.9 0.08 -120.9 0.74 -14.9 3.1 13.0 0.67 -16.1 -8.2 0.39 132.8 0.08 -127.5 0.75 -21.5 3.3 13.5 0.68 -25.4 -9.3 0.34 124.3 0.09 -134.7 0.75 -28.8 3.7 14.0 0.69 -35.5 -10.4 0.30 115.3 0.09 -142.8 0.74 -37.7 4.2 14.5 0.71 -45.7 -11.6 0.26 106.0 0.09 -151.5 0.74 -48.4 4.7 15.0 0.72 -55.3 -12.8 0.23 97.0 0.09 -160.2 0.74 -59.5 5.2 16.0 0.75 -70.2 -15.6 0.17 82.7 0.08 -174.3 0.78 -76.8 6.3 17.0 0.76 -80.7 -18.4 0.12 74.9 0.07 176.4 0.82 -84.9 7.4 18.0 0.77 -89.5 -20.6 0.09 71.0 0.07 168.7 0.83 -89.3 8.8 19.0 0.78 -99.3 -22.4 0.08 65.8 0.07 158.4 0.81 -99.1 11.6 20.0 0.80 -113.4 0.0 0.06 56.6 0.07 142.7 0.80 -118.5 15.7 Notes: 1. S-parameters are measured on a CPWG line fabricated on 0.025 inch thick Rogers® RO4350 material. The input reference plane is at the end of the input lead. The output reference plane is at the end of the output lead. 9 AVT-53663 Typical Scattering Parameters TA = 25°C, Zo = 50 , Id = 60 mA, (unless specified otherwise) Frequency GHz S11 S21 S12 S22 Mag Angle dB Mag Angle Mag Angle Mag Angle K 0.05 0.06 3.9 22.8 13.81 177.2 0.06 -0.3 0.09 -2.5 1.0 0.1 0.06 8.5 22.8 13.78 174.5 0.06 -1.0 0.09 -5.9 1.0 0.5 0.09 16.0 22.5 13.31 153.0 0.06 -5.1 0.09 -30.4 1.0 0.9 0.13 5.1 22.0 12.58 132.4 0.06 -9.0 0.12 -52.7 1.0 1.5 0.21 -20.7 21.0 11.25 103.1 0.06 -14.4 0.17 -85.2 1.1 2.0 0.24 -40.3 20.1 10.07 80.2 0.06 -18.5 0.20 -110.1 1.1 2.5 0.26 -61.3 19.0 8.92 58.6 0.06 -22.3 0.23 -130.9 1.2 3.0 0.28 -83.1 17.9 7.87 38.3 0.06 -25.5 0.26 -148.7 1.2 3.5 0.29 -105.3 16.8 6.92 19.0 0.05 -28.2 0.29 -165.4 1.3 4.0 0.31 -127.4 15.7 6.07 0.3 0.05 -30.7 0.31 177.9 1.4 4.5 0.32 -148.7 14.5 5.30 -17.8 0.06 -33.0 0.34 161.2 1.4 5.0 0.34 -169.5 13.2 4.59 -35.2 0.06 -35.4 0.38 145.7 1.5 5.5 0.36 170.6 12.0 3.96 -51.9 0.06 -38.0 0.41 131.1 1.6 6.0 0.38 151.9 10.6 3.41 -67.8 0.06 -41.2 0.45 116.9 1.6 6.5 0.40 134.4 9.3 2.92 -83.0 0.06 -45.0 0.48 103.8 1.6 7.0 0.42 118.2 8.0 2.51 -97.3 0.07 -49.3 0.52 92.2 1.6 7.5 0.45 103.5 6.7 2.16 -110.7 0.07 -54.2 0.54 81.9 1.7 8.0 0.47 89.9 5.4 1.87 -123.5 0.08 -59.5 0.56 72.4 1.7 8.5 0.49 76.4 4.2 1.63 -135.9 0.08 -65.6 0.57 62.7 1.8 9.0 0.51 62.5 3.0 1.41 -148.3 0.08 -72.5 0.58 52.3 1.9 9.5 0.53 48.6 1.7 1.22 -160.5 0.09 -80.0 0.60 41.1 2.0 10.0 0.55 35.9 0.4 1.05 -172.3 0.09 -87.7 0.62 29.3 2.1 10.5 0.57 25.1 -1.0 0.89 176.6 0.09 -95.2 0.64 18.0 2.2 11.0 0.60 16.0 -2.5 0.75 166.5 0.09 -102.2 0.67 7.8 2.4 11.5 0.62 8.0 -4.0 0.63 157.3 0.09 -108.6 0.70 -0.9 2.6 12.0 0.63 0.3 -5.4 0.54 148.9 0.09 -114.6 0.72 -8.4 2.8 12.5 0.65 -7.6 -6.8 0.46 140.7 0.09 -120.8 0.74 -15.1 3.0 13.0 0.67 -16.2 -8.0 0.40 132.6 0.09 -127.4 0.75 -21.7 3.2 13.5 0.68 -25.5 -9.1 0.35 124.1 0.09 -134.7 0.75 -29.0 3.6 14.0 0.69 -35.5 -10.2 0.31 115.0 0.09 -142.8 0.74 -37.9 4.1 14.5 0.70 -45.7 -11.3 0.27 105.6 0.09 -151.5 0.73 -48.5 4.6 15.0 0.72 -55.3 -12.6 0.24 96.5 0.09 -160.3 0.74 -59.7 5.1 16.0 0.75 -70.3 -15.4 0.17 82.0 0.08 -174.3 0.78 -77.0 6.1 17.0 0.76 -80.7 -18.1 0.12 74.0 0.07 176.4 0.82 -85.0 7.2 18.0 0.77 -89.5 -20.3 0.10 69.8 0.07 168.6 0.83 -89.4 8.6 19.0 0.78 -99.3 -22.2 0.08 64.3 0.07 158.3 0.81 -99.2 11.3 20.0 0.79 -113.5 -24.1 0.06 54.8 0.07 142.6 0.79 -118.6 15.4 Notes: 1. S-parameters are measured on a CPWG line fabricated on 0.025 inch thick Rogers® RO4350 material. The input reference plane is at the end of the input lead. The output reference plane is at the end of the output lead. 10 Part Number Ordering Information Part Number No. of Devices Container AVT-53663-TR1G 3000 7” Reel AVT-53663-BLKG 100 Antistatic bag Package Dimensions Recommended PCB Pad Layout for Avago’s SC70 6L/SOT-363 Products Outline 63 (SOT-363/SC-70) 0.026 HE E 0.079 0.039 e D 0.018 Dimensions in inches. Q1 A2 A c A1 L b Dimensions (mm) 11 Symbol Min Max E 1.15 1.35 D 1.80 2.25 HE 1.80 2.40 A 0.80 1.10 A2 0.80 1.00 A1 0.00 0.10 Q1 0.10 0.40 e 0.65 b 0.15 0.30 c 0.08 0.25 L 0.10 0.46 Notes: 1. All dimensions are in mm. 2. Dimensions are inclusive of plating. 3. Dimensions are exclusive of mold flash & metal burr. 4. All specifications comply to EIAJSC70. 5. Die is facing up for mold and facing down for trim/form, ie: reverse trim/form. 6. Package surface to be mirror finish. 0.650BCS. Device Orientation REEL TOP VIEW END VIEW 4 mm 8 mm CARRIER TAPE 53X 53X USER FEED DIRECTION COVER TAPE Tape Dimensions and Product Orientation for Outline 63 P P2 D P0 E F C D1 t1 (CARRIER TAPE THICKNESS) A0 DESCRIPTION LENGTH WIDTH DEPTH PITCH BOTTOM HOLE DIAMETER PERFORATION DIAMETER PITCH POSITION CARRIER TAPE WIDTH THICKNESS COVER TAPE WIDTH TAPE THICKNESS DISTANCE CAVITY TO PERFORATION (WIDTH DIRECTION) CAVITY TO PERFORATION (LENGTH DIRECTION) CAVITY 12 Tt (COVER TAPE THICKNESS) KO 10° MAX. 10° MAX. B0 SYMBOL A0 B0 K0 P D1 D P0 E W t1 C Tt F P2 W SIZE (mm) 2.40 ± 0.10 2.40 ± 0.10 1.20 ± 0.10 4.00 ± 0.10 1.00 + 0.25 1.55 ± 0.05 4.00 ± 0.10 1.75 ± 0.10 8.00 ± 0.30 0.254 ± 0.02 5.4 ± 0.10 0.062 ± 0.001 3.50 ± 0.05 SIZE (INCHES) 0.094 ± 0.004 0.094 ± 0.004 0.047 ± 0.004 0.157 ± 0.004 0.039 + 0.010 0.061 ± 0.002 0.157 ± 0.004 0.069 ± 0.004 0.315 ± 0.012 0.0100 ± 0.0008 0.205 ± 0.004 0.0025 ± 0.0004 0.138 ± 0.002 2.00 ± 0.05 0.079 ± 0.002 53X 53X Reel Dimension 7 inch For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright © 2005-2011 Avago Technologies. All rights reserved. AV02-2359EN - September 29, 2011