CD 261 LK Series 10 000 - 12 000h at 105°C CD 110 PT · High Reliability at High Voltage · Power Supplies · Electronic Lighting Ballast · General Industry 105°C CD 11G GW CD 261X QX 125°C highest currents CD 261 LK lower ESR longer life longest life CD 263 BK Item Characteristics Operating Temperature Range (°C) -25 ~ +105 Voltage Range (V) 160 ~ 450 Capacitance Range (µF) 6,8 ~ 220 Capacitance Tolerance (20°C, 120Hz) ± 20% Leakage Current (µA) After 1 minute at 20°C application of rated voltage, leakage current is not more than 0,04CV + 100. C: Nominal Capacitance (µF) V: Rated Voltage (V) Rated Voltage (V) Radial CD 262 QM 160 200 250 350 400 450 Dissipation Factor (20°C, 120Hz) Tanδ(max) 0,15 Rated Voltage (V) Stability at Low Temperature (Impedance Ratio at 120Hz) 160 0,20 200 Z -25°C / Z +20°C 250 Useful Life 350 400 4 3 450 6 Load Life Endurance Test Shelf Life Ø ≤ 10 : 10 000h >100 000h Ø ≥ 12 : 12 000h Ø ≤ 10 : 8 000h Ø ≥ 12 : 10 000h Ø ≤ 10 : 6 000h Ø ≥ 12 : 8 000h 1 000h Leakage Current Not more than specified value Not more than specified value Not more than specified value Not more than specified value Capacity Change Within ± 50% of initial value Within ± 30% of initial value Within ± 20% of initial value Within ± 20% of initial value Not more than 500% of specified value Not more than 300% of specified value Not more than 200% of specified value Not more than 200% of specified value UR UR UR UR UR = 0 IR 1,4 x IR IR IR = 0 IR = 0 105°C 60°C 105°C 105°C 105°C ≤ 1% Failure Rate ≤ 1% Failure Rate guaranteed Lifetime Dissipation Factor Condition: Applied Voltage Applied Current Applied Temperature Failure Rate Level After test: UR to be applied for 30min >24h before measurement Multiplier for Ripple Current Frequency Coefficient Lifetime Diagram 2.5 Frequency 50Hz 120Hz 1kHz 10kHz 100kHz Coefficient 0,30 0,50 0,80 0,90 1,00 CD 261 LK Series IA ––– 2.0 IR 1.5 1.0 0.5 X32 X16 X8 X4 X2 X1 Lifetime Multiplier 0.0 40 50 60 70 80 90 100 110 TA (˚C) IA = actual ripple current at 100kHz, IR = rated ripple current at 100kHz, 105°C Multiplier of Useful Life as a function of ambient temperature and ripple current load 20 Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 [email protected] www.jianghai-europe.com v2006.2 CD 261 LK Series Ratings for CD 261 LK Series (V) 160 (200) 2C Rated Max ESR Typ ESR Capacitance 20°C, 100Hz 20°C,100Hz Max Ripple Current 105°C, 100kHz Size ØDxL VDC (Surge Voltage) Code (Ω) (mArms) (mm) (V) (Ω) (mArms) 250 10 x 16 6,8 46,8 16,0 220 22 10,9 3,6 500 10 x 20 10 31,8 11,0 280 10 x 20 33 7,2 2,5 500 10 x 20 14,5 5,0 430 12,5 x 25 47 5,1 1,7 660 12,5 x 20 14,5 5,0 430 16 x 20 3,5 1,2 760 12,5 x 25 9,7 3,5 640 16 x 25 3,5 1,2 760 16 x 20 9,7 3,5 640 18 x 20 2,4 0,80 1 120 16 x 25 6,8 2,3 840 16 x 31,5 2,4 0,80 1 120 18 x 20 6,8 2,3 840 18 x 25 1,6 0,50 1 360 16 x 31,5 68 4,7 1,6 1 000 18 x 31,5 1,6 0,50 1 360 18 x 25 6,8 46,9 16,0 150 10 x 20 1,1 0,35 1 400 16 x 31,5 10 31,8 11,0 320 12,5 x 20 14,5 5,0 560 16 x 25 14,5 5,0 560 18 x 20 9,7 3,5 700 16 x 31,5 68 100 (µF) 22 400 (450) 2G 33 47 10 x 16 1,1 0,35 1 400 18 x 25 10 23,9 8,0 250 10 x 16 22 10,9 3,6 500 10 x 20 33 7,2 2,4 600 12,5 x 20 9,7 3,5 700 18 x 25 47 5,1 1,7 660 12,5 x 20 47 6,8 2,3 880 18 x 31,5 3,5 1,2 760 12,5 x 25 68 4,7 1,6 1 130 18 x 35,5 3,5 1,2 760 16 x 20 2,4 0,80 1 120 16 x 25 2,4 0,80 1 120 18 x 20 1,6 0,50 1 360 16 x 31,5 68 100 150 1,6 0,50 1 360 18 x 25 220 1,1 0,35 1 700 18 x 31,5 10 23,9 8,0 280 10 x 20 22 10,9 3,5 600 12,5 x 20 33 7,2 2,5 600 12,5 x 20 5,1 1,7 720 12,5 x 25 5,1 1,7 720 16 x 20 3,5 1,2 920 16 x 25 3,5 1,2 920 18 x 20 2,4 0,80 1 200 16 x 31,5 47 68 100 350 (400) 2V (mm) (Ω) 8,0 220 250 (300) 2E Size ØDxL 23,9 150 200 (250) 2D Max Ripple Current 105°C, 100kHz 10 (µF) (Ω) Rated Max ESR Typ ESR Capacitance 20°C, 100Hz 20°C,100Hz 2,4 0,80 1 200 18 x 25 150 1,6 0,50 1 500 18 x 31,5 6,8 46,8 16,0 220 10 x 16 10 31,8 11,0 280 10 x 20 22 14,5 5,0 350 12,5 x 20 33 9,7 3,5 500 16 x 20 6,8 2,3 660 16 x 25 6,8 2,3 660 18 x 20 4,7 1,6 850 16 x 31,5 4,7 1,6 850 18 x 25 47 68 450 (500) 2W 22 33 Custom products are available on request. Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 [email protected] www.jianghai-europe.com v2006.2 21 Radial VDC (Surge Voltage) Code Part Number System Order Code SMD, Radial, Snap-In EC R 1C Technology Terminal Type Rated Voltage Code EC = Electrolytic Capacitor PC = Polymer Capacitor SMD =V Radial =R Snap-In = S For coding please refer to the pages of ratings PT 101 M Series Code Capacitance Code (in µF) Capacitance Tolerance 0,47 = R47 ±20% FF 25 Lead Form Terminal/ Pitch Size = M SMD: 0611 JE xxxxx Dimension for Specials only 4x7 = 0407 5x11,5 = 0511 CD VS = BS CD VH = VH 1,0 = 010 =K Taped CD VZ = VZ 2,2 = 2R2 +30 / -10% = Q Radial: CD 261 = LK 100 = 101 Long Lead = LL 2,0mm = 20 35x80 CD 261X = QX 1 000 = 102 Cut 5,0mm = CB 2,5mm = 25 45x100 = 45100 ±10% +50 / -10% = T = FF Terminal = T2 6,3x11,5 = 0611 CD 262 = QM 10 000 = 103 Cut4,5mm = CC 3,5mm = 35 CD 263 = BK Cut 4,0mm = CD 5,0mm = 50 CD 269 = PH Cut 3,5mm = CE 7,5mm = 75 CD 281 = LL Cut 3,0mm = CF 10,0mm = 10 CD 284 = XY CD 287 = GC CD 28L = QL Snap-In: CD 293 = BZ 4,0mm Pin Length = T4 2 Pin CD 294 = BW 6,3mm Pin Length = T6 3 Pin = P3 CD 295 = BC Soldering Pin 4 Pin = P4 CD 296 = KC 5 Pin = P5 CD 297 = BB CD 299 = PG on request: alternative lead forms (axial, 90° - angle, others) = 3580 12,5mm = 12 = S4 = P2 preferred CD 29D = HR CD 29H = QH CD 29L = QL HCP = CP HPM = PM HVC = VC Technical Specification SMD Type Dimensions Ø DxL 4 x 5,4 5 x 5,4 A 1,8 2,1 2,4 2,5 2,9 2,9 3,2 3,2 B 4,3 5,3 6,6 6,6 8,3 8,4 10,3 10,4 C 4,3 5,3 6,6 6,6 8,3 8,4 10,3 10,4 E 1,0 1,3 2,2 2,2 3,1 3,1 4,5 4,5 L 5,4 5,4 5,4 7,7 10,5 11,8 10,5 12,7 W 6,3 x5,4 6,3x 7,7 8 x 10,5 8 x 11,8 10x10,5 10x12,7 0,5 - 0,8 0,7 - 1,1 in mm Taping Dimensions Size (DxL) w ± 0,3 A ± 0,2 B ± 0,2 P ± 0,1 t2 ± 0,2 F ± 0,1 t1 ± 0,1 4 x 5,4 12,0 5,0 5,0 8,0 5,8 5,5 0,4 5 x 5,4 12,0 6,0 6,0 12,0 5,8 5,5 0,4 6,3 x 5,4 16,0 7,0 7,0 12,0 5,8 7,5 0,4 6,3 x 7,7 16,0 7,0 7,0 12,0 8,4 7,5 0,4 8 x 10,5 24,0 8,7 8,7 16,0 11,0 11,5 0,5 8 x 11,8 24,0 8,7 8,7 16,0 12,3 11,5 0,5 10 x 10,5 24,0 10,7 10,7 16,0 11,0 11,5 0,5 10 x 12,7 24,0 10,7 10,7 16,0 14,0 11,5 0,5 in mm Soldering Profile (Aluminium Electrolytic Capacitors) Diameter w D 4; 5 14 ± 1 50 ± 1 6,3 18 ± 1 50 ± 1 8; 10 25 ± 1 50 ± 1 Polymer 25 ± 1 80 ± 1 in mm Allowable Range of Peak Temperature Size T (°C) t (second) t 1 (second) Ø 4 ~ 6,3 Ø 8 x 10,5 Ø 10 x 10,5 250 240 235 90 90 60 40 30 30 For more details or Soldering Profiles of Radials or Polymer-Capacitors please contact our local Sales Offices. Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 [email protected] www.jianghai-europe.com v2006.2 Part Number System Technical Specification Radial Type Dimensions for loose, long-lead type, (bulk) Order Code: LL L L≤7 L ≥ 11 ØD 3 4 5 6,3 8 5 6,3 8 F 1 1,5 2,0 2,5 3,5 2,0 2,5 3,5 Ø d 0,4 aMax 0,45 0,5 10 12,5 16 5,0 0,6 1,0 18 7,5 0,8 20 22 10,0 25 12,5 1,0 2,0 in mm Dimensions for Ammopack taping Order Code: FF (FD) Code Case Range ØD Dimensions L (max) H ± 0,75 Ho ± 0,5 F ± 0,5 P ± 0,1 4~6 13 18,5 - 2,5 12,7 8 13 18,5 - 3,5 12,7 4~8 7 17,5 5 ~ 6,3 13 18,5 Ammopack Form Form A A Form B FF 16 B 12,7 8 22 20,0 5 10 22 18,5 A FD 12,5 27 18,5 - 15,0 12,5 27 18,5 - 25,4 Form C C FF 16 ~ 18 27 18,5 - 7,5 30,0 in mm Dimensions for loose, short cut leads, (bulk) Order Code: CC (CB,CD,CE,CF) Straight Lead Bended Lead 2.5max Code CB CC CD CE CF I 5,0 ± 0,5 4,5 ± 0,5 4,0 ± 0,5 3,5 ± 0,5 3,0 ± 0,5 preferred in mm Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 [email protected] www.jianghai-europe.com v2006.2