Kingbright AAAF3528PBZSEJVGZW 3.5x2.8mm surface mount smd chip led Datasheet

3.5X2.8mm SURFACE MOUNT SMD CHIP LED
PRELIMINARY SPEC
Part Number: AAAF3528PBZSEJVGZW
BLUE
ATTENTION
HYPER ORANGE
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
GREEN
Description
OUTSTANDING MATERIAL EFFICIENCY.
The Blue source color devices are made with InGaN Light
LOW POWER CONSUMPTION.
Emitting Diode
ONE BLUE, ONE ORANGE AND ONE GREEN CHIPS IN
The Super Bright device is based on a light emitting diode
ONE PACKAGE.
chip made from AlGaInP and bonded on silicon substrate.
CAN PRODUCE ANY COLOR IN VISIBLE SPECTRUM,
INCLUDING WHITE LIGHT.
The Green source color devices are made with InGaN Light
Emitting Diode.
SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER
PROCESS.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
AVAILABLE ON TAPE AND REEL.
glove when handling the LEDs.
MOISTURE SENSITIVITY LEVEL : LEVEL 4.
All devices, equipment and machinery must be electrically
RoHS COMPLIANT.
grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3.Specifications are subject to change without notice.
4.The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAH1738
REV NO: V.1
DATE: JAN/30/2007
PAGE: 1 OF 7
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: F.ZHANG
ERP: 1201002753
Selection Guide
Dice
Part No.
Iv (mcd) [2]
@ 20mA
Lens Type
Min.
BLUE (InGaN)
AAAF3528PBZSEJVGZW
HYPER ORANGE (AlGaInP)
WHITE DIFFUSED
GREEN (InGaN)
Typ.
110
320
900
1700
650
1200
Viewing
Angle [1]
2θ1/2
120°
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous Intensity / Luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
Units
Test Conditions
458
640
525
Max.
nm
IF=20mA
λpeak
Peak Wavelength
Blue
Hyper Orange
Green
λD [1]
Dominant Wavelength
Blue
Hyper Orange
Green
465
630
535
nm
IF=20mA
Δλ1/2
Spectral Line Half-width
Blue
Hyper Orange
Green
22
25
39
nm
IF=20mA
C
Capacitance
Blue
Hyper Orange
Green
110
27
65
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Blue
Hyper Orange
Green
3.2
2.0
3.2
3.7
2.8
3.7
V
IF=20mA
IR
Reverse Current
Blue
Hyper Orange
Green
10
10
10
uA
VR = 5V
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Blue
Hyper Orange
Green
Units
Power dissipation
111
140
111
mW
DC Forward Current
30
50
30
mA
Peak Forward Current [1]
100
150
100
mA
Reverse Voltage
5
Operating/Storage Temperature
V
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAH1738
REV NO: V.1
DATE: JAN/30/2007
PAGE: 2 OF 7
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: F.ZHANG
ERP: 1201002753
AAAF3528PBZSEJVGZW
Blue
SPEC NO: DSAH1738
REV NO: V.1
DATE: JAN/30/2007
PAGE: 3 OF 7
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: F.ZHANG
ERP: 1201002753
Hyper Orange
SPEC NO: DSAH1738
REV NO: V.1
DATE: JAN/30/2007
PAGE: 4 OF 7
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: F.ZHANG
ERP: 1201002753
Green
SPEC NO: DSAH1738
REV NO: V.1
DATE: JAN/30/2007
PAGE: 5 OF 7
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: F.ZHANG
ERP: 1201002753
AAAF3528PBZSEJVGZW
Recommended Soldering Pattern
(Units : mm; Tolerance: ±0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAH1738
REV NO: V.1
DATE: JAN/30/2007
PAGE: 6 OF 7
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: F.ZHANG
ERP: 1201002753
PACKING & LABEL SPECIFICATIONS
AAAF3528PBZSEJVGZW
SPEC NO: DSAH1738
REV NO: V.1
DATE: JAN/30/2007
PAGE: 7 OF 7
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: F.ZHANG
ERP: 1201002753
Similar pages