ZETTLER AZ2250-1CT-24AF 30 amp miniature power relay Datasheet

AZ2250
30 AMP MINIATURE
POWER RELAY
FEATURES
•
•
•
•
•
•
•
1 Form A, B and C contacts available
AC and DC coils available
High dielectric strength version available
Epoxy sealed versions available
UL Class F (155°C) standard
UL, CUR file E44211
VDE certificate 40027037
CONTACTS
GENERAL DATA
Arrangement
SPST (1 Form A)
SPST (1 Form B)
SPDT (1 Form C)
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 30 A 250 VAC
Ratings
Resistive load:
Operate Time
15 ms max. at nominal coil voltage
Max. switched power: 840 W or 8310 VA
Max. switched current: 30 A
Max. switched voltage: 28 VDC or 277 VAC
Release Time
10 ms max. at nominal coil voltage
(with no coil suppression)
Dielectric Strength
(at sea level for 1 min.)
2500 Vrms coil to contact
4000 Vrms coil to contact (version “T”)
1500 Vrms between open contacts
Insulation Resistance
1000 megaohms min. at 20°C,
500 VDC 50% RH
Dropout
DC: > 10% of nominal coil voltage
AC: > 20% of nominal coil voltage
1 Form A
1 Form B
1 Form C
Max. switched power: 280 W or 4155VA
Max. switched current: 15 A
Max. switched voltage: 28 VDC or 277 VAC
Max. switched power:
560 W or 8310 VA (N.O.)
280 W or 5540 VA (N.C.)
Max. switched current: 30 A (N.O.)
20 A (N.C.)
Max. switched voltage: 28 VDC or 277 VAC
Material
Silver cadmium oxide [1], silver tin oxide [2]
Resistance
< 50 milliohm initially
(24 V, 1A voltage drop method)
COIL
Power
At Pickup Voltage
(typical)
500 mW, DC coil
1.4 VA, AC coil
Max. Continuous
Dissipation
1.7 W at 20°C (68°F) ambient, DC coil
2.7 VA at 20°C (68°F) ambient, AC coil
Temperature Rise
43°C (77°F) at nominal coil voltage
Max. Temperature
Ambient Temperature
Operating
-40°C (-40°F) to 85°C (185°F), DC coils
-40°C (-40°F) to 70°C (158°F), AC coils
Vibration
1.5 mm DA at 10-55 Hz
Shock
10 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time
30 seconds
Weight
36 grams
Packing unit in pcs
40 per plastic tray / 280 per carton
155°C (311°F)
NOTES
1.
2.
3.
4.
5.
All values at 20°C (68°F)
Relay may pull in with less than “Must Operate” value.
AC coils are not VDE approved
18 VDC coil is not VDE approved.
Specification subject to change without notice.
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-09-08
AZ2250
CONTACTS
Rated load
UL
Rated load
VDE
1 Form A
30 A at 277 VAC, General Use, 80°C, 6k cycles [1][2]
30 A at 28 VDC, resistive, 80°C, 6k cycles [1]
28 A at 277 VAC, General Use, 80°C, 100k cycles [1]
20 FLA / 60 LRA at 277 VAC, 80°C, 30k cycles [1]
2 HP at 250 VAC [1][2]
1 HP at 125 VAC [1][2]
1 Form A, DC coils only
30 A at 250 VAC, resistive, 30k cycles [1]
15 A at 250 VAC, cos phi = 0.4, 100k cycles [1][2]
1 Form B, DC coils only
15 A at 250 VAC, resistive, 30k cycles [1]
1 Form C, (N.O.), DC coils only
30 A at 250 VAC, resistive, 30k cycles [1]
20 A at 250 VAC, resistive, 100k cycles [2]
1 Form B
15 A at 277 VAC, General Use, 80°C, 6k cycles [1]
10 A at 28 VDC, resistive, 80°C, 6k cycles [1]
10 FLA / 33 LRA at 277 VAC, 80°C, 30k cycles [1]
0.5 HP at 250VAC [1]
0.25 HP at 125 VAC [1]
1 Form C, (N.C.), DC coils only
15 A at 250 VAC, resistive, 30k cycles [1]
10 A at 250 VAC, resistive, 100k cycles [2]
1 Form C, (N.O.)
30 A at 277 VAC, General Use, 80°C, 6k cycles [1][2]
20 A at 277 VAC, General Use, 80°C, 6k cycles [1]
20 A at 28 VDC, resistive, 80°C, 6k cycles [1]
20 FLA / 60 LRA at 277 VAC, 80°C, 30k cycles [1]
2 HP at 250 VAC [1][2]
1 HP at 125 VAC [1][2]
Note: 18 VDC coil is not VDE approved.
AC coils are not VDE approved.
1 Form C, (N.C.)
20 A at 277 VAC, General Use, 80°C, 6k cycles [1][2]
10 A at 28 VDC, resistive, 80°C, 6k cycles [1]
10 FLA / 33 LRA at 277 VAC, 80°C, 30k cycles [1]
0.5 HP at 250 VAC [1][2]
0.25 HP at 125 VAC [1][2]
RELAY ORDERING DATA
COIL SPECIFICATIONS – DC Coil
Nominal Coil
VDC
Must Operate
VDC
ORDER NUMBER*
Max. Continuous
VDC
Coil Resistance
Ohm ± 10%
1 Form A
1 Form C
5
3.75
6.5
27
AZ2250-1AT-5DF
AZ2250-1CT-5DF
6
4.5
7.8
40
AZ2250-1AT-6DF
AZ2250-1CT-6DF
9
6.75
11.7
97
AZ2250-1AT-9DF
AZ2250-1CT-9DF
12
9.0
15.6
155
AZ2250-1AT-12DF
AZ2250-1CT-12DF
15
11.25
19.5
256
AZ2250-1AT-15DF
AZ2250-1CT-15DF
18
13.5
23.4
380
AZ2250-1AT-18DF
AZ2250-1CT-18DF
24
18.0
31.2
660
AZ2250-1AT-24DF
AZ2250-1CT-24DF
48
36.0
62.4
2,560
AZ2250-1AT-48DF
AZ2250-1CT-48DF
110
82.5
143.0
13,450
AZ2250-1AT-110DF
AZ2250-1CT-110DF
COIL SPECIFICATIONS – AC Coil 50/60 Hz
Nominal Coil
VDC
Must Operate
VDC
12
9.6
ORDER NUMBER*
Max. Continuous
VDC
Nominal Coil
Power VA
13.8
2.3
AZ2250-1AT-12AF
AZ2250-1CT-12AF
1 Form A
1 Form C
24
19.2
27.6
2.1
AZ2250-1AT-24AF
AZ2250-1CT-24AF
120
96.0
138.0
2.3
AZ2250-1AT-120AF
AZ2250-1CT-120AF
220
176.0
286.0
2.2
AZ2250-1AT-220AF
AZ2250-1CT-220AF
240
192.0
286.0
2.6
AZ2250-1AT-240AF
AZ2250-1CT-240AF
277
220.0
318.5
2.2
AZ2250-1AT-277AF
AZ2250-1CT-277AF
* “1AT” or “1CT” denote silver cadmium oxide contacts.
Substitute “1BT” in place of “1AT” or “1CT” for 1 Form B relay.
Substitute “1AET” or “1CET” in place of “1AT” or “1CT” for silver tin oxide contacts.
Substitute “DEF” or “AEF” at the end of order number for epoxy sealed version.
Add “T” before “F” at the end of order number for 4000Vrms dielectric strength.
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-09-08
AZ2250
MECHANICAL DATA
PC BOARD LAYOUT
.130
(3.3)
1.268
(32.2)
.400
.300
(10.16) (7.62)
3 x ø .079
[ø 2.0]
.504
(12.8)
.693
(17.6)
.900
(22.86)
2 x ø .044
[ø 1.0]
.094
(2.4)
.181
(4.6)
.150
(3.8)
.550
(14.0)
.791
(20.1)
1.063
(27.0)
.700
(17.8)
.197
(5.0)
Viewed toward terminals
WIRING DIAGRAMS
.098
(2.5)
Form A
Form B
Form C
.045 x .045
(1.14 x 1.14)
.032 x .062
(0.81 x 1.57)
.025 x .025
(0.63 x 0.63)
Viewed toward terminals
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 [email protected]
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-09-08
Similar pages